What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

cv129 · 12-08-2019, 08:31 PM

10mm spacers and extended studs in front for the wifey’s ride....sucked without an impact wrench.

Hands and arms are sore

Spooler · 12-08-2019, 09:01 PM

Quote:

Originally Posted by cv129

10mm spacers and extended studs in front for the wifey’s ride....sucked without an impact wrench.

Hands and arms are sore

LOL, I never use one at home and I have access to an air compressor and impact wrench. Now my dually truck, heck yes I break out the impact.

cv129 · 12-08-2019, 10:29 PM

Quote:

Originally Posted by Spooler

LOL, I never use one at home and I have access to an air compressor and impact wrench. Now my dually truck, heck yes I break out the impact.

Everything other than changing oil is a first for me. When it comes to working on cars, I have much to learn lol. Saving grace is that the fleet is pretty much identical under the skin, so I don’t need to relearn things.

Just bought an impact, on sale at HomeDepot, just the lower end consumer grade Ryobi cordless, but that’ll work for me.

enkei2k · 12-11-2019, 08:34 PM

Finally decided to get the Z1 Post-MAF's this past Black Friday and installed them. They say it takes about 45 minutes to 1 hour. For me, it took 4-5 hours total due to being a weaksauce and no muscles. Side note, did not have to trim anything like mentioned in a few threads.

abm89 · 12-12-2019, 05:42 PM

Real drivers never lift. However with that being said, torque is your friend. Long wrench handles are the way to go when possible.

Work smarter not harder!

Ian B · 12-16-2019, 12:15 AM

Got my hella horns yesterday to replace stock horns. Once I get my LED headlight bulbs will do the install as the bumper needs to come off for both jobs.

Ian B

jchammond · 12-16-2019, 12:32 AM

Quote:

Originally Posted by Ian B

Got my hella horns yesterday to replace stock horns. Once I get my LED headlight bulbs will do the install as the bumper needs to come off for both jobs.

Ian B

You done got use to those bright Camry headlamps

I have people flash their lights at me on a regular basis

jchammond · 12-16-2019, 12:37 AM

Quote:

Originally Posted by Leingod

Da hell is this stuff that just showed up? 0_o

Looking different than the stuff they shipped me

cv129 · 12-16-2019, 12:56 AM

Quote:

Originally Posted by Leingod

Da hell is this stuff that just showed up? 0_o

Quote:

Originally Posted by jchammond

Looking different than the stuff they shipped me

Ian B · 12-16-2019, 02:10 AM

Quote:

Originally Posted by jchammond

You done got use to those bright Camry headlamps

I have people flash their lights at me on a regular basis

yes, brightness w led is amazing when aimed correctly.

Leingod · 12-16-2019, 01:05 PM

Quote:

Originally Posted by jchammond

Looking different than the stuff they shipped me

It's all about the angle of the dangle

cv129 · 12-16-2019, 05:46 PM

Installed Z1 2 pc rears...courtesy of PharmDZ.....

Like a dumbass I realized I installed them backward after already buttoned everything back up one side....so I swung the rubber mallet at my balls a couple of times, then sucked it up and corrected it.

Well at least now I’m an expert at installing the traction arms now.

Rusty · 12-16-2019, 05:58 PM

Quote:

Originally Posted by cv129

Installed Z1 2 pc rears...courtesy of PharmDZ.....

Like a dumbass I realized I installed them backward after already buttoned everything back up one side....so I swung the rubber mallet at my balls a couple of times, then sucked it up and corrected it.

Well at least now I’m an expert at installing the traction arms now.

What you do? Hit your wife's purse a couple of times. Because I thought your balls was in your wife's purse.

cv129 · 12-16-2019, 06:48 PM

Quote:

Originally Posted by Rusty

What you do? Hit your wife's purse a couple of times. Because I thought your balls was in your wife's purse.

What’s mine is hers. What’s hers is...hers.

Rusty · 12-16-2019, 06:54 PM

Quote:

Originally Posted by cv129

What’s mine is hers. What’s hers is...hers.

Truer words were never spoken.

12-08-2019, 08:31 PM	#4366 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,222 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	10mm spacers and extended studs in front for the wifey’s ride....sucked without an impact wrench. Hands and arms are sore Rusty, Ghostvette, redondoaveb and 2 others like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

12-11-2019, 08:34 PM	#4369 (permalink)
enkei2k A True Z Fanatic Join Date: Apr 2011 Location: NYC Posts: 6,365 Drives: '12 G41 B/S M6 Rep Power: 3716	Finally decided to get the Z1 Post-MAF's this past Black Friday and installed them. They say it takes about 45 minutes to 1 hour. For me, it took 4-5 hours total due to being a weaksauce and no muscles. Side note, did not have to trim anything like mentioned in a few threads. Rusty, axmea?, Hotrodz and 4 others like this. __________________ ...need boost...

12-12-2019, 05:42 PM	#4370 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Real drivers never lift. However with that being said, torque is your friend. Long wrench handles are the way to go when possible. Work smarter not harder! God-Speed, Hotrodz, Ghostvette and 2 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

12-16-2019, 12:15 AM	#4371 (permalink)
Ian B Track Member Join Date: Mar 2011 Location: Cedar Park Posts: 679 Drives: 2010 Nissan Rep Power: 137465	Got my hella horns yesterday to replace stock horns. Once I get my LED headlight bulbs will do the install as the bumper needs to come off for both jobs. Ian B Ghostvette, old guy and redondoaveb like this.

12-16-2019, 05:46 PM	#4377 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,222 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	Installed Z1 2 pc rears...courtesy of PharmDZ..... Like a dumbass I realized I installed them backward after already buttoned everything back up one side....so I swung the rubber mallet at my balls a couple of times, then sucked it up and corrected it. Well at least now I’m an expert at installing the traction arms now. JARblue, Rusty, Hotrodz and 5 others like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM