What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Ian B · 09-25-2019, 12:58 AM

Quote:

Originally Posted by abm89

If you aren't going to do it yourself, I guess I would check out Custom Sounds. Just read reviews and know what you want before going in. The guys who did the Tint in my Honda (Sunbuster's tint) do audio installs. They did have to re-do the tint on my window due to some lint, but it wasn't a hassle to get that corrected. Audio either works or it doesn't.

Side note: I found that replacing the head-unit greatly improved the sound of the base model speakers. But that's all subjective.

Thanks for the info. I already switched the head unit with a Sony AA/CP features.

Ian B

Ian B · 09-27-2019, 02:09 AM

New door speakers, amp and subwoofer to be installed Monday.

madwi · 09-27-2019, 03:11 AM

Quote:

Originally Posted by Ian B

New door speakers, amp and subwoofer to be installed Monday.

Whaddya get?

Ian B · 09-27-2019, 03:30 AM

Quote:

Originally Posted by madwi

Whaddya get?

Will post names tommorrow. Cant remember the amp or speakers I chose. The subwoofer s is a 10" Massive brand.

Zyonara91 · 09-27-2019, 10:35 PM

Car sits low on coilovers and I do not have a low profile jack, only a regular three ton. So today I made some make shift wooden plank "stair" ramps to get some clearance off the ground. They worked like a charm! Jack fits directly under the front of the car and I can jack it from the centre point. MUAHAHAHAH. Oh, while the car was on that slant life, I took off the side skirt, had enough of them. Funny how stock can look sexy.

BettyZ · 09-29-2019, 12:23 AM

Ordered Swift springs for the rear since the stock Nismo springs are far, far too large for the SPL rear mid-links.

Sent from my SM-G955U using Tapatalk

Ian B · 09-29-2019, 02:41 AM

Installed both belt mouldings on the doors. It was a 10 minute.

Ghostvette · 09-30-2019, 09:10 AM

Quote:

Originally Posted by Ian B

Installed both belt mouldings on the doors. It was a 10 minute.

I like things that are easy....

Spooler · 09-30-2019, 09:42 AM

Quote:

Originally Posted by Zyonara91

Car sits low on coilovers and I do not have a low profile jack, only a regular three ton. So today I made some make shift wooden plank "stair" ramps to get some clearance off the ground. They worked like a charm! Jack fits directly under the front of the car and I can jack it from the centre point. MUAHAHAHAH. Oh, while the car was on that slant life, I took off the side skirt, had enough of them. Funny how stock can look sexy.

That's what I did. I am too cheap to buy race ramps. LOL I made front and rear ones.

Zyonara91 · 09-30-2019, 12:08 PM

Quote:

Originally Posted by BettyZ

Ordered Swift springs for the rear since the stock Nismo springs are far, far too large for the SPL rear mid-links.

Sent from my SM-G955U using Tapatalk

Sweet. What is the drop on the Swifts in the rear and front?

Zyonara91 · 09-30-2019, 12:10 PM

Quote:

Originally Posted by Spooler

That's what I did. I am too cheap to buy race ramps. LOL I made front and rear ones.

Honestly it makes sense to do so if you have the time. I wonder what the weight ratings are on the home made wooden ramps? I still use a jack and jack stands of course in conjunction with them.

BettyZ · 09-30-2019, 12:38 PM

Quote:

Originally Posted by Zyonara91

Sweet. What is the drop on the Swifts in the rear and front?

Only bought rears to fit the SPL rear mid-links. No drop, car is already low enough that I cringe going over roadkill lol.

Sent from my SM-G955U using Tapatalk

Ian B · 09-30-2019, 02:02 PM

Got kenwood door speakers w amp and Massive brand 10” subwoofer installed today. At dr now and then taking Uber to pick up before heading to work.

Here are pics of Massive amp and 10” subwoofer install. Finally loud volume w tight bass.

Zezus · 09-30-2019, 02:36 PM

Tried to reinstall the aimgain splitter and everything went to hell. The old rivnuts pushed through the skirt so I had to take off the oem skirt to remove the old ones and install new ones. Turned into a several hour ordeal as I had to hunt down larger bolts too.

Sent from my SM-G965U using Tapatalk

BettyZ · 09-30-2019, 09:30 PM

Quote:

Originally Posted by Zezus

Tried to reinstall the aimgain splitter and everything went to hell. The old rivnuts pushed through the skirt so I had to take off the oem skirt to remove the old ones and install new ones. Turned into a several hour ordeal as I had to hunt down larger bolts too.

Sent from my SM-G965U using Tapatalk

No jackstands?!?!?

Sent from my SM-G955U using Tapatalk

09-27-2019, 10:35 PM	#4175 (permalink)
Zyonara91 Enthusiast Member Join Date: Jun 2016 Location: GTA Posts: 368 Drives: 2010-Red-6spd-S/T Rep Power: 15756	Car sits low on coilovers and I do not have a low profile jack, only a regular three ton. So today I made some make shift wooden plank "stair" ramps to get some clearance off the ground. They worked like a charm! Jack fits directly under the front of the car and I can jack it from the centre point. MUAHAHAHAH. Oh, while the car was on that slant life, I took off the side skirt, had enough of them. Funny how stock can look sexy. Rusty, Hotrodz, Ghostvette and 3 others like this. __________________ 2FT3PDLZ

09-29-2019, 12:23 AM	#4176 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Ordered Swift springs for the rear since the stock Nismo springs are far, far too large for the SPL rear mid-links. Sent from my SM-G955U using Tapatalk Zyonara91 and redondoaveb like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

09-29-2019, 02:41 AM	#4177 (permalink)
Ian B Track Member Join Date: Mar 2011 Location: Cedar Park Posts: 679 Drives: 2010 Nissan Rep Power: 137465	Installed both belt mouldings on the doors. It was a 10 minute. Hotrodz, Ghostvette, old guy and 1 others like this.

09-30-2019, 02:36 PM	#4184 (permalink)
Zezus Enthusiast Member Join Date: Dec 2018 Location: Cincinnati Posts: 354 Drives: 2016 370z sport 6spd Rep Power: 50339	Tried to reinstall the aimgain splitter and everything went to hell. The old rivnuts pushed through the skirt so I had to take off the oem skirt to remove the old ones and install new ones. Turned into a several hour ordeal as I had to hunt down larger bolts too. Sent from my SM-G965U using Tapatalk Rusty, axmea?, Hotrodz and 2 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

09-27-2019, 02:09 AM	#4172 (permalink)
Ian B Track Member Join Date: Mar 2011 Location: Cedar Park Posts: 679 Drives: 2010 Nissan Rep Power: 137465	New door speakers, amp and subwoofer to be installed Monday.