What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Spooler · 08-20-2019, 05:08 PM

Friend of mine drove home from Tampa, Fl. Car quite charging halfway through the trip. Well, no lights for him the rest of the way home. He made it. I got in the next day and he told me what happened. I tapped on it with a hammer and it started charging again. Hell, he taught me that trick. Not sure what he was thinking. LOL Went and got a new alternator anyway. It was my old car and I had bought a lifetime warranty alternator. This was alternator #3 for that 1978 280z. LOL

Rusty · 08-20-2019, 06:49 PM

Quote:

Originally Posted by Spooler

Friend of mine drove home from Tampa, Fl. Car quite charging halfway through the trip. Well, no lights for him the rest of the way home. He made it. I got in the next day and he told me what happened. I tapped on it with a hammer and it started charging again. Hell, he taught me that trick. Not sure what he was thinking. LOL Went and got a new alternator anyway. It was my old car and I had bought a lifetime warranty alternator. This was alternator #3 for that 1978 280z. LOL

I'm still waiting for my high output alternator from DC Power to show up.

JARblue · 08-20-2019, 10:40 PM

Brand new battery. Recent test showed 640 cold cranking amps. Should be more than enough. For peace of mind, awhile back I threw in another battery that was working fine in another car. No dice.

mishuko · 08-21-2019, 07:21 AM

Not sure why but my right rear is wearing faster than my left... maybe tire pressure? Need to check that on the weekend when car is cold.

Well the right is at the bar, left a tad above bars. Hoping tires are in this week so i can light up my olds

JARblue · 08-21-2019, 09:10 AM

Quote:

Originally Posted by mishuko

Not sure why but my right rear is wearing faster than my left... maybe tire pressure? Need to check that on the weekend when car is cold.

Well the right is at the bar, left a tad above bars. Hoping tires are in this week so i can light up my olds

Typically uneven wear for me just means I'm not driving it hard enough. The stock camber causes the insides wear much quicker than the outsides if just driving straight. I've found it just needs some regular hard cornering to keep the outside wear even with the inside wear

abm89 · 08-21-2019, 10:18 AM

Get the toe angle and pressure checked. Usually toe will kill your tires (cause uneven wear) before camber. I'm running -2.7 deg all around and my wear is even.

Rusty · 08-21-2019, 12:42 PM

Quote:

Originally Posted by mishuko

Not sure why but my right rear is wearing faster than my left... maybe tire pressure? Need to check that on the weekend when car is cold.

Well the right is at the bar, left a tad above bars. Hoping tires are in this week so i can light up my olds

Which diff you have? Open, VLSD, or aftermarket?

Spooler · 08-21-2019, 01:16 PM

Quote:

Originally Posted by Rusty

Which diff you have? Open, VLSD, or aftermarket?

He has a Nismo VLSD. He is doing the one wheel peeler and doesn't know it.

BettyZ · 08-21-2019, 01:46 PM

Seems like Z1 has discovered the joys of just-in-time inventory, minus the just-in-time part.

Rusty · 08-21-2019, 02:26 PM

Quote:

Originally Posted by Spooler

He has a Nismo VLSD. He is doing the one wheel peeler and doesn't know it.

That was what I was thinking.

mishuko · 08-21-2019, 03:39 PM

Quote:

Originally Posted by JARblue

Typically uneven wear for me just means I'm not driving it hard enough. The stock camber causes the insides wear much quicker than the outsides if just driving straight. I've found it just needs some regular hard cornering to keep the outside wear even with the inside wear

Lol it was left tire vs right tire uneven wearing. The insides are def at wear bar and outsides got a tad bit before the bar.... oh well light em up!!!

Most likely pressure or alignment as abm noted...

Quote:

Originally Posted by abm89

Get the toe angle and pressure checked. Usually toe will kill your tires (cause uneven wear) before camber. I'm running -2.7 deg all around and my wear is even.

Havent done alignment since i got the car. I generally do it once i get new tires. Am noticing a bit of high speed vibrations so its most likely a combo of what you said.

Quote:

Originally Posted by Rusty

Which diff you have? Open, VLSD, or aftermarket?

Oem nismo quasi maybe it wants to but probably isnt going to just gonna weldit.

Rusty · 08-21-2019, 03:44 PM

Quote:

Originally Posted by mishuko

Lol it was left tire vs right tire uneven wearing. The insides are def at wear bar and outsides got a tad bit before the bar.... oh well light em up!!!

Most likely pressure or alignment as abm noted...

Havent done alignment since i got the car. I generally do it once i get new tires. Am noticing a bit of high speed vibrations so its most likely a combo of what you said.

Oem nismo quasi maybe it wants to but probably isnt going to just gonna weldit.

Lincoln Locker. That's going to put some stress on the axles.

mishuko · 08-21-2019, 05:57 PM

Quote:

Originally Posted by Rusty

Lincoln Locker. That's going to put some stress on the axles.

I think you saw that last year my old z had an axle ripped out from the collision...

Next year i am probably going to look at getting the hd csc and whiteline diff bushings installed depending on budget...

I love the FI exhaust. Once warmed up its sooo good. Neutral wont do it. But down shifting or while in gear hitting 3k rpm and pulling off the gas i get a nice byop sound. Not as burbly as the bimmers or turbos but it doesnt seem forced.

Byop. Just the tip.

SRJ · 08-22-2019, 09:11 AM

Trackspec hood vents installed!

BettyZ · 08-22-2019, 10:22 AM

Quote:

Originally Posted by SRJ

Trackspec hood vents installed!

Very nice! More pics please

Sent from my SM-G955U using Tapatalk

08-20-2019, 05:08 PM	#3976 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Friend of mine drove home from Tampa, Fl. Car quite charging halfway through the trip. Well, no lights for him the rest of the way home. He made it. I got in the next day and he told me what happened. I tapped on it with a hammer and it started charging again. Hell, he taught me that trick. Not sure what he was thinking. LOL Went and got a new alternator anyway. It was my old car and I had bought a lifetime warranty alternator. This was alternator #3 for that 1978 280z. LOL Rusty, Hotrodz, Ghostvette and 2 others like this.

08-20-2019, 10:40 PM	#3978 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Brand new battery. Recent test showed 640 cold cranking amps. Should be more than enough. For peace of mind, awhile back I threw in another battery that was working fine in another car. No dice. Rusty, Hotrodz, Ghostvette and 3 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

08-21-2019, 07:21 AM	#3979 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	Not sure why but my right rear is wearing faster than my left... maybe tire pressure? Need to check that on the weekend when car is cold. Well the right is at the bar, left a tad above bars. Hoping tires are in this week so i can light up my olds JARblue, Hotrodz, Ghostvette and 3 others like this.

08-21-2019, 10:18 AM	#3981 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Get the toe angle and pressure checked. Usually toe will kill your tires (cause uneven wear) before camber. I'm running -2.7 deg all around and my wear is even. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

08-21-2019, 01:46 PM	#3984 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Seems like Z1 has discovered the joys of just-in-time inventory, minus the just-in-time part. Rusty, Hotrodz, Ghostvette and 2 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

08-22-2019, 09:11 AM	#3989 (permalink)
SRJ Base Member Join Date: Apr 2016 Location: Middle Ohio Posts: 23 Drives: Juke Nismo RS 6sp Rep Power: 9	Trackspec hood vents installed! JARblue, Rusty, Hotrodz and 10 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM