What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

ChopsZ · 05-19-2019, 06:50 PM

Installed a Helix DSP.2 yesterday, and spent some time today dialing it in.

Sway · 05-19-2019, 06:51 PM

Quote:

Originally Posted by BettyZ

My lines are run Z1-style.. I would have deleted the stock sandwich cooler/tubes and run the oil lines along the pan and up the driver's side, but I live in Chiberia and really dislike the idea of idling for 25 minutes before the oil is warm enough.

Solid way, my filter area is a bit cramped with the 2.5” tubes from the fangs. Might still be a way to run the lines from the top if I play with them a bit. Idk. Wish I had a lift so I could stand under the damn thing.

BettyZ · 05-19-2019, 08:00 PM

Quote:

Originally Posted by Sway

Solid way, my filter area is a bit cramped with the 2.5” tubes from the fangs. Might still be a way to run the lines from the top if I play with them a bit. Idk. Wish I had a lift so I could stand under the damn thing.

Ahh I hadn't thought about that. Have you considered buying a QuickJack? And no, I'm not talking about Rhonda down the block

ZontheRocks · 05-19-2019, 08:51 PM

Installed the Z1 subframe collars today. These were installed on a 2016 Sport with the following current suspension modifications:

- 2016 Nismo Struts and Springs
- Nismo S-Tune F/R Sway Bars

Install took my father and I about three hours. I was able to complete the install without dropping the mufflers (I run Motordyne), however I did unbolt the rear hangers.

First impression is that the inserts definitely added stiffness to the rear end. On hard shifts, the need to replace my blown diff bushing is more evident than ever, giving off a hearty and well known - CLUNK - This was not happening before the install, so I will use it as a decent barometer on measuring increased stiffness.

I am happy with the results given the cost of the mod. It is also advancing my timeline on moving the Z1 diff bushings from the box to the car!

Eventually, I'll find time to install the ART pipes. More recent research confirms that the used ones I picked up are most likely Version 1s (ceramic coating and no added support for the resonators or the cross support), so I am hoping that they don't produce any rasp.

Sway · 05-19-2019, 09:20 PM

Quote:

Originally Posted by BettyZ

Ahh I hadn't thought about that. Have you considered buying a QuickJack? And no, I'm not talking about Rhonda down the block

A what who now?

Zontherocks, no offense, but I thought the Z1 collars are supposed to take maybe an hour if not less?

ZontheRocks · 05-19-2019, 09:34 PM

Quote:

Originally Posted by Sway

ZontheRocks, no offense, but I thought the Z1 collars are supposed to take maybe an hour if not less?

Haha, not offended. After having done it once now, I can see it taking an hour if I were to do it again. Plenty of time was used to convince myself to not follow the recommendation in the instructions to remove the exhaust, which is different than the single exit in the Z1 installation video (Motordyne’s V-bands can be a pain).

I’m a take my time DIY mechanic, so never any rush when I’m doing the job for the first time.

BettyZ · 05-19-2019, 09:43 PM

Quote:

Originally Posted by Sway

A what who now?

Zontherocks, no offense, but I thought the Z1 collars are supposed to take maybe an hour if not less?

It's what's holding my car up in this pic. Very sturdy and far safer than putting the Z on jackstands.

Sent from my SM-G955U using Tapatalk

BettyZ · 05-19-2019, 09:48 PM

Quote:

Originally Posted by ZontheRocks

Haha, not offended. After having done it once now, I can see it taking an hour if I were to do it again. Plenty of time was used to convince myself to not follow the recommendation in the instructions to remove the exhaust, which is different than the single exit in the Z1 installation video (Motordyne’s V-bands can be a pain).

I’m a take my time DIY mechanic, so never any rush when I’m doing the job for the first time.

100%. I've had enough "f*ck me with an unlubed traffic cone" moments that I double the estimated install time.

Sent from my SM-G955U using Tapatalk

Jonitus · 05-19-2019, 09:58 PM

Quote:

Originally Posted by BettyZ

100%. I've had enough "f*ck me with an unlubed traffic cone" moments that I double the estimated install time.

Sent from my SM-G955U using Tapatalk

My, my...what a vivid mental picture you paint.

BettyZ · 05-19-2019, 10:12 PM

Quote:

Originally Posted by Jonitus

My, my...what a vivid mental picture you paint.

It's all that legal edjumacation.

Sent from my SM-G955U using Tapatalk

ShuuraRG · 05-19-2019, 10:29 PM

Quote:

Originally Posted by BettyZ

It's what's holding my car up in this pic. Very sturdy and far safer than putting the Z on jackstands.

Sent from my SM-G955U using Tapatalk

I regret not buying one when I had the money and opportunity a few years back... With my kid graduating high school, my funds no longer belong to me.

abm89 · 05-19-2019, 11:21 PM

Quote:

Originally Posted by ShuuraRG

With my kid graduating high school, my funds no longer belong to me.

I would insert a comment about making them figure it out themselves, but then I'd just sound salty lol.

BettyZ · 05-20-2019, 02:17 AM

Quote:

Originally Posted by ShuuraRG

I regret not buying one when I had the money and opportunity a few years back... With my kid graduating high school, my funds no longer belong to me.

That is why I have no children that I acknowledge.

Sway · 05-20-2019, 05:27 AM

Quote:

Originally Posted by BettyZ

It's what's holding my car up in this pic. Very sturdy and far safer than putting the Z on jackstands.

Sent from my SM-G955U using Tapatalk

Holy ******* **** ***** *** **** I need a set of those? What’s the size and stuff you have? I’ll look into it

BettyZ · 05-20-2019, 09:19 AM

Quote:

Originally Posted by Sway

Holy ******* **** ***** *** **** I need a set of those? What’s the size and stuff you have? I’ll look into it

https://www.quickjack.com/car-lift-s...-car-lift.html

Hunt around for deals, I got mine delivered from Costco at $950.00.

The absolutely necessary pinch weld blocks https://www.quickjack.com/accessorie...er-blocks.html

There's an entire quickjack thread on this forum, somewhere...

Sent from my SM-G955U using Tapatalk

05-19-2019, 06:50 PM	#3181 (permalink)
ChopsZ Track Member Join Date: May 2016 Location: Central Florida Age: 49 Posts: 965 Drives: 2016 370Z GM 6MT Rep Power: 2301	Installed a Helix DSP.2 yesterday, and spent some time today dialing it in. Ghostvette, redondoaveb and BettyZ like this. __________________ She's For Sale! PERFORMANCE: Aero Workz \| Akebono \| BC Racing \| EcuTek \| HKS \| MaxBore \| Motordyne \| Nismo \| RJM \| SPL \| StopTech \| Z1 AUDIO: Arc Audio \| Bazooka \| Helix \| Pioneer \| Stereo Integrity

05-19-2019, 08:51 PM	#3184 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 959 Drives: 2016 Nissan PW 370Z Rep Power: 34535	Installed the Z1 subframe collars today. These were installed on a 2016 Sport with the following current suspension modifications: - 2016 Nismo Struts and Springs - Nismo S-Tune F/R Sway Bars Install took my father and I about three hours. I was able to complete the install without dropping the mufflers (I run Motordyne), however I did unbolt the rear hangers. First impression is that the inserts definitely added stiffness to the rear end. On hard shifts, the need to replace my blown diff bushing is more evident than ever, giving off a hearty and well known - CLUNK - This was not happening before the install, so I will use it as a decent barometer on measuring increased stiffness. I am happy with the results given the cost of the mod. It is also advancing my timeline on moving the Z1 diff bushings from the box to the car! Eventually, I'll find time to install the ART pipes. More recent research confirms that the used ones I picked up are most likely Version 1s (ceramic coating and no added support for the resonators or the cross support), so I am hoping that they don't produce any rasp. BettyZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM