What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

madwi · 03-25-2019, 09:38 PM

Quote:

Originally Posted by cthorson910

Installed my z1 poly trans mount today and am patiently waiting for my coolerworx shifter to arrive. Ordered almost 2 weeks ago from Soho Motorsports, so I'm hoping it comes in soon.

ymmv mine took just over 4 weeks to get. It is a nice piece though! I impulse bought it and had my doubts but I really like it and a couple others liked the solid, short movement.

cthorson910 · 03-25-2019, 09:44 PM

Quote:

Originally Posted by madwi

ymmv mine took just over 4 weeks to get. It is a nice piece though! I impulse bought it and had my doubts but I really like it and a couple others liked the solid, short movement.

Oh my, that is beautiful. I called Soho and I believe spoke to Nick on Friday because I had gotten an email stating that my order had been marked complete on their end, so I was hoping the wait time listed on their website hadn't been updated. He said it was an issue with changing their website and the 3-4 weeks was still accurate. That being said, all good things take time..and from what I have seen on this shifter, it will be more than worth the wait. This was a total impulse buy as well, was looking at the TWM but after doing more reading I found the coolerworx and fell in love.

Sway · 03-25-2019, 11:40 PM

Well, got the Spc toe bolts in, but not the Z1 bushings. Got dark fast and my file bit was dull so it took forever to drill out the holes. Oh well, at least I got one thing done today. Alignment tomorrow at 1pm. Hopefully adding in the Z1 subframe collars don’t change the alignment after.

JARblue · 03-26-2019, 02:53 PM

Carbotech brake pads (XP8/XP10) and SPL solid differential bushings showed up today

ChopsZ · 03-26-2019, 03:44 PM

A couple days ago I purchased a small 1700 psi electric pressure washer. Today in the mail, I just received some Chemical Guys goodies for the cars.

Sway · 03-26-2019, 03:49 PM

I always wonder if I should’ve gone with solid diff bushings instead of white line..

madwi · 03-26-2019, 05:54 PM

I'm digging the new raceseng knob.

good weight and feel to it.

redondoaveb · 03-26-2019, 06:39 PM

Quote:

Originally Posted by madwi

I'm digging the new raceseng knob.

good weight and feel to it.

Have you installed it yet? Hotrodz and myself both had to re-tap the first few threads on the Coolerworx shifter in order to get the Raceseng adapter to thread on.

madwi · 03-26-2019, 07:20 PM

Quote:

Originally Posted by redondoaveb

Have you installed it yet? Hotrodz and myself both had to re-tap the first few threads on the Coolerworx shifter in order to get the Raceseng adapter to thread on.

I have not, will give that a look when I start.

redondoaveb · 03-26-2019, 07:25 PM

Quote:

Originally Posted by madwi

I have not, will give that a look when I start.

I believe with the way the Coolerworx shift knob is bolted down, it compresses the first couple or so threads and they just need to be slightly cleaned up.

madwi · 03-26-2019, 07:32 PM

Quote:

Originally Posted by redondoaveb

I believe with the way the Coolerworx shift knob is bolted down, it compresses the first couple or so threads and they just need to be slightly cleaned up.

I have a re-threader kit so Ill run the die down a bit. I appreciate the heads up.

Jayhovah · 03-27-2019, 02:18 PM

I barely get to drive my car these days since I started working from home... to the point where it is a struggle to drive my vehicles enough to even keep the batteries conditioned. For the rest of the DD tasks we take my girl's far-more-practical Toyota Yaris - the Z would be a waste of miles as she does not allow me to have any fun at all when I drive with her in the car.

Anyhow.. I had to go to an appointment that was 35 minutes away of 6 lanes of light-traffic interstate driving and decided to let the snails out for some exercise. You drive something for a while and no matter how powerful it is, you'll get used to it. Take some time away (I think the addicts call this a 'tolerance break') and it'll be your honeymoon all over again.

I may or may not have hit full boost in 5th.
I may or may not have peed myself a little.

ColtronZ · 03-27-2019, 02:45 PM

Quote:

Originally Posted by Jayhovah

You drive something for a while and no matter how powerful it is, you'll get used to it.

As a DD I feel this far too often. Still love the car just wish it had more but I don't need that kind of temptation.

Spooler · 03-27-2019, 03:11 PM

Quote:

Originally Posted by Jayhovah

I barely get to drive my car these days since I started working from home... to the point where it is a struggle to drive my vehicles enough to even keep the batteries conditioned. For the rest of the DD tasks we take my girl's far-more-practical Toyota Yaris - the Z would be a waste of miles as she does not allow me to have any fun at all when I drive with her in the car.

Anyhow.. I had to go to an appointment that was 35 minutes away of 6 lanes of light-traffic interstate driving and decided to let the snails out for some exercise. You drive something for a while and no matter how powerful it is, you'll get used to it. Take some time away (I think the addicts call this a 'tolerance break') and it'll be your honeymoon all over again.

I may or may not have hit full boost in 5th.
I may or may not have peed myself a little.

I see depends in your near future. So says my crystal ball.

Leingod · 03-27-2019, 07:34 PM

Memphis, here comes the other side of the exhaust!!

03-25-2019, 11:40 PM	#2793 (permalink)
Sway Track Member Join Date: Sep 2012 Location: TX Posts: 697 Drives: 2018 GTR Rep Power: 37871	Well, got the Spc toe bolts in, but not the Z1 bushings. Got dark fast and my file bit was dull so it took forever to drill out the holes. Oh well, at least I got one thing done today. Alignment tomorrow at 1pm. Hopefully adding in the Z1 subframe collars don’t change the alignment after. Rusty, Hotrodz, madwi and 1 others like this. __________________ - White 2018 GTR FBO+E85 - Check out my old build thread: Sway’s Journal-Hitomi ~Live and let live!~ Last edited by Sway; 03-26-2019 at 02:09 AM.

03-26-2019, 02:53 PM	#2794 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Carbotech brake pads (XP8/XP10) and SPL solid differential bushings showed up today Rusty, Hotrodz, madwi and 3 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-26-2019, 03:44 PM	#2795 (permalink)
ChopsZ Track Member Join Date: May 2016 Location: Central Florida Age: 49 Posts: 965 Drives: 2016 370Z GM 6MT Rep Power: 2301	A couple days ago I purchased a small 1700 psi electric pressure washer. Today in the mail, I just received some Chemical Guys goodies for the cars. Hotrodz, wideglideleon and A Black Z34 like this. __________________ She's For Sale! PERFORMANCE: Aero Workz \| Akebono \| BC Racing \| EcuTek \| HKS \| MaxBore \| Motordyne \| Nismo \| RJM \| SPL \| StopTech \| Z1 AUDIO: Arc Audio \| Bazooka \| Helix \| Pioneer \| Stereo Integrity

03-26-2019, 03:49 PM	#2796 (permalink)
Sway Track Member Join Date: Sep 2012 Location: TX Posts: 697 Drives: 2018 GTR Rep Power: 37871	I always wonder if I should’ve gone with solid diff bushings instead of white line.. __________________ - White 2018 GTR FBO+E85 - Check out my old build thread: Sway’s Journal-Hitomi ~Live and let live!~

03-26-2019, 05:54 PM	#2797 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	I'm digging the new raceseng knob. good weight and feel to it. TreeSemdyZee, JTM88 and redondoaveb like this.

03-27-2019, 07:34 PM	#2805 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684397	Memphis, here comes the other side of the exhaust!! JARblue, Hotrodz, Ghostvette and 2 others like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM