What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

JARblue · 10-27-2018, 02:08 AM

Drove the Z for the first time since April

Blurred proof attached

Rusty · 10-27-2018, 03:08 AM

Quote:

Originally Posted by JARblue

Drove the Z for the first time since April

Blurred proof attached

So, how did it feel to be behind the wheel again?

JARblue · 10-27-2018, 10:50 AM

Quote:

Originally Posted by Rusty

So, how did it feel to be behind the wheel again?

Amazing. Mostly the same as before, except lighter

I am whole again

hrtbrknprince · 10-27-2018, 10:27 PM

So I'm in the process of removing my door handles to send to paint and I realized.. What do I do while they're at the body shop for a few days? I obviously won't be driving the car but it does stay outside with a car cover. Will I be able to open and shut the doors if I have to move the car at least lol? Or should I just purchase another set of door handles?

Zingston · 10-27-2018, 11:03 PM

Quote:

Originally Posted by hrtbrknprince

So I'm in the process of removing my door handles to send to paint and I realized.. What do I do while they're at the body shop for a few days? I obviously won't be driving the car but it does stay outside with a car cover. Will I be able to open and shut the doors if I have to move the car at least lol? Or should I just purchase another set of door handles?

If its a problem: Buy another set and have those painted. Then swap.

Lvcky69 · 10-28-2018, 01:17 AM

out for the night

ColtronZ · 10-29-2018, 09:06 AM

Got e-tuned this weekend with EcuTek software. My car feels more natural if that makes sense.

Still trying to figure out how my pops and bangs mapping works.

Ian B · 10-29-2018, 09:42 PM

Had a tire go low in pressure yesterday while at car wash. Aired it up and today looked ok. Went by dealer to have oil changed w a $20 coupon offer. Had them check the tire and they found a small crack about 1/2 long on the inside of the rim. Suggested a new rim but, one of the techs knows of a shop that can weld it before buying a new rim. Called them and dropped off the rim, its $125 and will get it back in 1-2 days. While they had the car up, they found my front left control arm is broken and needs replacing, the one on the right is fine. They recommended replacing both for $1k and then doing an alignment.
They also recommended to have the differential fluid replaced since the car has 103k miles.

Told him to write it up for me to review and have Kevin at Austin Z Clinic inspect it and give me a quote for the work.

Any feedback is appreciated.

Ian B

jwick · 10-29-2018, 10:39 PM

Rim repair is typical price. If you are replacing control arms, I recommend upgrading as it will give you more alignment flexibility and it’ll handle better. Labor should be three hours or less plus alignment, so $350-400 plus cost of parts.

Rusty · 10-29-2018, 10:46 PM

Which control is broken. Upper or lower? And if it's broken, how are you driving the car?

Ian B · 10-29-2018, 11:18 PM

Quote:

Originally Posted by Rusty

Which control is broken. Upper or lower? And if it's broken, how are you driving the car?

Car is driving fine. I believe its the lower one. Here is a picture of it.

Ian B

Rusty · 10-30-2018, 12:03 AM

Quote:

Originally Posted by Ian B

Car is driving fine. I believe its the lower one. Here is a picture of it.

Ian B

Ok, lower ball joint is going bad. With the Z. You have to buy the whole lower arm to get the ball joint. You just can't get the ball joint.

Ian B · 10-30-2018, 12:15 AM

Quote:

Originally Posted by Rusty

Ok, lower ball joint is going bad. With the Z. You have to buy the whole lower arm to get the ball joint. You just can't get the ball joint.

Thanks for the info, any idea on price for oem lower arm and labor hours??

Tia,

Ian B

Rusty · 10-30-2018, 01:22 AM

Quote:

Originally Posted by Ian B

Thanks for the info, any idea on price for oem lower arm and labor hours??

Tia,

Ian B

To replace the lower control arm. Remove one bolt and pop the ball joint stud out of the steering knuckle. Remove 2 bolts in the front bushing. Remove 2 bolts in the rear bushing. Arm falls out. Figure about an hour for the swap if the guy doing is half good. No idea on price for labor and parts.

Ian B · 10-30-2018, 02:24 AM

Quote:

Originally Posted by Rusty

To replace the lower control arm. Remove one bolt and pop the ball joint stud out of the steering knuckle. Remove 2 bolts in the front bushing. Remove 2 bolts in the rear bushing. Arm falls out. Figure about an hour for the swap if the guy doing is half good. No idea on price for labor and parts.

Thanks for info, that will give me a start.

Ian B

10-28-2018, 01:17 AM	#2406 (permalink)
Lvcky69 Enthusiast Member Join Date: Jun 2017 Location: Miami Posts: 385 Drives: 17 370z & 16 911 S Rep Power: 3922	out for the night Rusty, Ghostvette, QuZang and 3 others like this.

10-29-2018, 09:06 AM	#2407 (permalink)
ColtronZ Enthusiast Member Join Date: Jan 2018 Location: Tampa, FL Posts: 310 Drives: 17 370z Rep Power: 6295	Got e-tuned this weekend with EcuTek software. My car feels more natural if that makes sense. Still trying to figure out how my pops and bangs mapping works. ZontheRocks likes this.

10-29-2018, 10:39 PM	#2409 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Rim repair is typical price. If you are replacing control arms, I recommend upgrading as it will give you more alignment flexibility and it’ll handle better. Labor should be three hours or less plus alignment, so $350-400 plus cost of parts. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

10-29-2018, 10:46 PM	#2410 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Which control is broken. Upper or lower? And if it's broken, how are you driving the car? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

10-27-2018, 10:27 PM	#2404 (permalink)
hrtbrknprince Base Member Join Date: Feb 2012 Location: Savannah Posts: 113 Drives: 14 MBMM6S Rep Power: 3368	So I'm in the process of removing my door handles to send to paint and I realized.. What do I do while they're at the body shop for a few days? I obviously won't be driving the car but it does stay outside with a car cover. Will I be able to open and shut the doors if I have to move the car at least lol? Or should I just purchase another set of door handles?

10-29-2018, 09:42 PM	#2408 (permalink)
Ian B Track Member Join Date: Mar 2011 Location: Cedar Park Posts: 679 Drives: 2010 Nissan Rep Power: 137465	Had a tire go low in pressure yesterday while at car wash. Aired it up and today looked ok. Went by dealer to have oil changed w a $20 coupon offer. Had them check the tire and they found a small crack about 1/2 long on the inside of the rim. Suggested a new rim but, one of the techs knows of a shop that can weld it before buying a new rim. Called them and dropped off the rim, its $125 and will get it back in 1-2 days. While they had the car up, they found my front left control arm is broken and needs replacing, the one on the right is fine. They recommended replacing both for $1k and then doing an alignment. They also recommended to have the differential fluid replaced since the car has 103k miles. Told him to write it up for me to review and have Kevin at Austin Z Clinic inspect it and give me a quote for the work. Any feedback is appreciated. Ian B