What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Ghostvette · 08-29-2018, 01:51 PM

Quote:

Originally Posted by mishuko

2019 nismo....

We were 12 twinsies now we can be 19 nismies twinsies

If I can find a dealer to sell me a 19 Nismo @ 18 prices....

if I wanted to pay $45k for a car, I'd get a Cayman S....

Besides, around here, the only Nismos I can find are A7s....

mishuko · 08-29-2018, 06:23 PM

I am a weak *** mother fer becsuse even with strap wrenches i coudlnt get my shift knob off. Cries

Quote:

Originally Posted by Ghostvette

If I can find a dealer to sell me a 19 Nismo @ 18 prices....

if I wanted to pay $45k for a car, I'd get a Cayman S....

Besides, around here, the only Nismos I can find are A7s....

I paid a bit more than that in canadian......and yes only 3 in toronto in black.

redondoaveb · 08-29-2018, 06:39 PM

Quote:

Originally Posted by mishuko

I am a weak *** mother fer becsuse even with strap wrenches i coudlnt get my shift knob off. Cries

I paid a bit more than that in canadian......and yes only 3 in toronto in black.

My shift knob was on so tight I ended up wrapping the crap out of it with masking tape and used a big pipe wrench. Even then it was a b!tch to get off. I had to use the pipe wrench until just about the last thread.

mishuko · 08-29-2018, 08:11 PM

Quote:

Originally Posted by redondoaveb

My shift knob was on so tight I ended up wrapping the crap out of it with masking tape and used a big pipe wrench. Even then it was a b!tch to get off. I had to use the pipe wrench until just about the last thread.

Im gonna wrap the **** out of it in saran wrap... then try with strap wrench again

madwi · 08-29-2018, 08:29 PM

Quote:

Originally Posted by mishuko

Im gonna wrap the **** out of it in saran wrap... then try with strap wrench again

buildup of gaffers tape and a pipe wrench will be your friend.

Rusty · 08-29-2018, 08:39 PM

Quote:

Originally Posted by madwi

buildup of gaffers tape and a pipe wrench will be your friend.

Need a pipe wrench like this. At the power plant we had 6fter's, both aluminum and cast steel. The cast steel pipe wrenches, we moved with either fork lift or crane.

onzedge · 08-30-2018, 05:06 AM

Quote:

Originally Posted by madwi

buildup of gaffers tape and a pipe wrench will be your friend.

Quote:

Originally Posted by Rusty

Need a pipe wrench like this. At the power plant we had 6fter's, both aluminum and cast steel. The cast steel pipe wrenches, we moved with either fork lift or crane.

ChopsZ · 08-30-2018, 09:11 AM

Quote:

Originally Posted by ChopsZ

Went out after work and did a couple of 2nd and 3rd gear WOT pulls to log and send to Seb.

Got an email back from Seb. He says everything looks fine the way it is. No adjustments needed. Hmm...

ColtronZ · 08-30-2018, 09:26 AM

Quote:

Originally Posted by madwi

Which TPs?

Gotta Go Fast.. Intentions res tps.

mishuko · 08-30-2018, 06:04 PM

Motored. Going to drive to work tomorrow. The stop n go will be helpful to vary rpm

Hotrodz · 08-30-2018, 07:00 PM

Quote:

Originally Posted by mishuko

Motored. Going to drive to work tomorrow. The stop n go will be helpful to vary rpm

Haha, I would take her out and run her at 100mph for as long as I could and as many times as I could for an hour or so. Then bring her home and change the oil! New motors these days have really tight tolerances and break in is over precautionary to protect the manufacturing. But I'm stupid that way, lol.

Sent from my SM-G965U using Tapatalk

mishuko · 08-31-2018, 06:29 AM

Quote:

Originally Posted by Hotrodz

Haha, I would take her out and run her at 100mph for as long as I could and as many times as I could for an hour or so. Then bring her home and change the oil! New motors these days have really tight tolerances and break in is over precautionary to protect the manufacturing. But I'm stupid that way, lol.

Sent from my SM-G965U using Tapatalk

Lol 160kmh = bye bye car for 7 days

I been fluctuating revs from 3-4 hitting 5 once fluids warm. Did touch 6 a few times and its like ahhh i wanna keep going!

I was going to wait for another 100 or so km before i redline once. Clutch still being broken in so taking it easy on launches. Trying to get used to the new dynamics so holding off being too spirited around corners as i rebuild confidence

( Click to show/hide )

onzedge · 09-01-2018, 09:13 AM

We installed new tail-lights on the 240Z...

R1talin · 09-01-2018, 02:50 PM

Goose Dies.....

Rusty · 09-01-2018, 02:52 PM

Quote:

Originally Posted by R1talin

Goose Dies.....

Again? Damn...........

08-30-2018, 06:04 PM	#2200 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	Motored. Going to drive to work tomorrow. The stop n go will be helpful to vary rpm JARblue, Rusty and Hotrodz like this.

09-01-2018, 09:13 AM	#2203 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	We installed new tail-lights on the 240Z... JARblue, Rusty, Hotrodz and 8 others like this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

09-01-2018, 02:50 PM	#2204 (permalink)
R1talin Base Member Join Date: Mar 2017 Location: FL - Florida Posts: 60 Drives: 16 370z Nismo 6MT Rep Power: 6718	Goose Dies.....