What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

axmea? · 08-17-2018, 08:05 PM

Finally got to install the CS Nismo '15 side skirts.

[IMG]

20180817_155344 by Raf, on Flickr[/IMG]

[IMG]

20180817_124247 by Raf, on Flickr[/IMG]

redondoaveb · 08-17-2018, 09:51 PM

My custom Speedhut AFR gauge came in, just a quick test with a 9 volt battery. Still waiting for the matching boost gauge.

Rusty · 08-17-2018, 09:54 PM

Quote:

Originally Posted by redondoaveb

My custom Speedhut AFR gauge came in, just a quick test with a 9 volt battery. Still waiting for the matching boost gauge.

How do you like it?

redondoaveb · 08-17-2018, 10:06 PM

Quote:

Originally Posted by Rusty

How do you like it?

It looks nice sitting in the box. 😁 My car is still in the shop for sc upgrades. I had to fabricate a new cubby panel that will now hold 4 gauges. AFR, Speedhut boost, Zeitronics ethanol content and my SPA techinque combo water temp/oil pressure.

You have Speedhut don't you? How do you like them?

madwi · 08-17-2018, 10:32 PM

Quote:

Originally Posted by redondoaveb

It looks nice sitting in the box. 😁 My car is still in the shop for sc upgrades. I had to fabricate a new cubby panel that will now hold 4 gauges. AFR, Speedhut boost, Zeitronics ethanol content and my SPA techinque combo water temp/oil pressure.

You have Speedhut don't you? How do you like them?

my nitrous pressure gauge is nice. No issues with it after a few years.

madwi · 08-17-2018, 10:32 PM

Quote:

Originally Posted by axmea?

Finally got to install the CS Nismo '15 side skirts.

( Click to show/hide )

Looks great Raf!

Rusty · 08-17-2018, 10:40 PM

Quote:

Originally Posted by redondoaveb

It looks nice sitting in the box. 😁 My car is still in the shop for sc upgrades. I had to fabricate a new cubby panel that will now hold 4 gauges. AFR, Speedhut boost, Zeitronics ethanol content and my SPA techinque combo water temp/oil pressure.

You have Speedhut don't you? How do you like them?

Love the SpeedHut gauges.

You're putting the gauges in the cubby cover? You might want to rethink that. The gauges on the right side will be facing away from you. Making it harder to see.

redondoaveb · 08-17-2018, 10:40 PM

Quote:

Originally Posted by madwi

my nitrous pressure gauge is nice. No issues with it after a few years.

That's good to know, they seem to be well made.

axmea? · 08-17-2018, 11:47 PM

Quote:

Originally Posted by madwi

Looks great Raf!

Grassy A$$ Scott.

REVRAY · 08-19-2018, 09:37 PM

Quote:

Originally Posted by CRiZO

So clean. What plate holder do you have?

Thank You! That was a clean day.

Purchased 2013 last year with 22K on vehicle. Had the bumper license plate mount. Before I had 5K on car, a 35 lb raccoon took out my bumper. Hit it at about 45 mph, took hit in front of drivers wheel. Oh well, that is what insurance is for. When replaced, I told them not drill holes and mount plate.

Found this on eBay. I like the look so much better. Front Bumper Tow Hook License Plate Mounting Bracket Holder For 13+ Nissan 370Z

REVRAY · 08-19-2018, 09:43 PM

Love the color!

redondoaveb · 08-19-2018, 10:00 PM

Quote:

Originally Posted by Rusty

Love the SpeedHut gauges.

You're putting the gauges in the cubby cover? You might want to rethink that. The gauges on the right side will be facing away from you. Making it harder to see.

Nice gauges, looks good. The cover I made is flat so I won't have an issue with them facing away from me. Plus the gauges that will be on that side are the ethanol content (not a critical gauge) and the combo water temp/oil pressure gauge and it's digital (easy to read, even with my old, bad eyes).

REVRAY · 08-19-2018, 10:22 PM

Replaced brake fluid yesterday at 48K, not sure if it had ever been done. I had picked up a vacuum bleeder from Harbor Freight (Sale for $19, found cheaper on eBay). Opted to just use the adapter because of the nice bleeder connection.

Pneumatic Brake Fluid Bleeder Tool with 4 Master Cylinder Adapters 90 to 120 psi

Disconnected the ABS connector vs disconnecting battery. Bleeding order is different than RR, LR, RF, and LF. Followed FSM and did RR, LF, LR, and RF. End to end, a little over an hour to complete.

Pretty dirty, glad it is done. Pedal was good before, but is noticeably firmer.

mishuko · 08-20-2018, 02:40 PM

Found out i have employee discounts for nissans.... fk time to price a nismo!

Quote:

Originally Posted by REVRAY

Replaced brake fluid yesterday at 48K, not sure if it had ever been done. I had picked up a vacuum bleeder from Harbor Freight (Sale for $19, found cheaper on eBay). Opted to just use the adapter because of the nice bleeder connection.

Pneumatic Brake Fluid Bleeder Tool with 4 Master Cylinder Adapters 90 to 120 psi

Disconnected the ABS connector vs disconnecting battery. Bleeding order is different than RR, LR, RF, and LF. Followed FSM and did RR, LF, LR, and RF. End to end, a little over an hour to complete.

Pretty dirty, glad it is done. Pedal was good before, but is noticeably firmer.

Damn! I do brake and clutch together ever 10k km.

radix023 · 08-20-2018, 03:27 PM

So I'm braking for a speed table in a residential neighborhood and suicide squirrel goes for it . Street pizza. First kill with the car. (bugs don't count)

08-17-2018, 08:05 PM	#2131 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	Finally got to install the CS Nismo '15 side skirts. [IMG]20180817_155344 by Raf, on Flickr[/IMG] [IMG]20180817_124247 by Raf, on Flickr[/IMG] madwi, hustleman222, Memphis370Z and 5 others like this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

08-20-2018, 03:27 PM	#2145 (permalink)
radix023 Base Member Join Date: Mar 2017 Location: ATL Posts: 114 Drives: 2016-370z-silver-m6 Rep Power: 8	the reaper So I'm braking for a speed table in a residential neighborhood and suicide squirrel goes for it . Street pizza. First kill with the car. (bugs don't count)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

08-19-2018, 09:43 PM	#2141 (permalink)
REVRAY Base Member Join Date: Feb 2017 Location: Chisago City, MN Posts: 42 Drives: 2013 370Z Touring Sp Rep Power: 8	Love the color!