What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Baronsmokes · 01-11-2018, 05:27 PM

The upholstery was done localy.The CF is mostly Evo-R.My buddy has been making the other pieces.He made some molds and a vacum set up.He did sill plates,Roll bar,badges,covers,all kinds of stuff.He is working on rear spoiler extension now for aftermarket spoiler on roadster.

JTM88 · 01-12-2018, 09:11 AM

I’m getting my pumpkin with 4.09s back today and installing it tonight! Quick question I’ll be putting in the Z1 front diff bushings(main bushing is already in) and I was wondering if you reuse that metal spacer that is above the stock bushings.

Sent from my iPhone using Tapatalk

Jayhovah · 01-12-2018, 10:13 AM

Quote:

Originally Posted by Baronsmokes

The upholstery was done localy.The CF is mostly Evo-R.My buddy has been making the other pieces.He made some molds and a vacum set up.He did sill plates,Roll bar,badges,covers,all kinds of stuff.He is working on rear spoiler extension now for aftermarket spoiler on roadster.

Damn... If you had gotten a kit from leatherseats or katskinz or something I would be updating my wishlist!

Kzonts · 01-12-2018, 02:23 PM

Quote:

Originally Posted by JTM88

I’m getting my pumpkin with 4.09s back today and installing it tonight! Quick question I’ll be putting in the Z1 front diff bushings(main bushing is already in) and I was wondering if you reuse that metal spacer that is above the stock bushings.

Sent from my iPhone using Tapatalk

Are you talking about the black spacers in this pic? I didn't put them back in. I just checked since I couldn't remember... However, I'm not sure if I was supposed to :-). Anyway it's been operating superbly...

Update: I checked the installation guide on the Z1 website and it doesn't show the reuse of those.

DrBacon · 01-12-2018, 08:39 PM

Ordered a new air fuel sensor after the installation of the art pipes apparently broke it.

Spooler · 01-12-2018, 09:26 PM

Dodged a bullet today. I just about got rear ended again. This time I saw it coming and chose the median that was a big mud pit. Traction control kick in and I sunk. Oh well. Car is fine just some grass sods to clean off underneath. My neck is good and my car is good. I just got a tow bill for someone to winch me out. I'll pay that any day of the week and twice on Sunday.

Hotrodz · 01-12-2018, 09:27 PM

Quote:

Originally Posted by Spooler

Dodged a bullet today. I just about got rear ended again. This time I saw it coming and chose the median that was a big mud pit. Traction control kick in and I sunk. Oh well. Car is fine just some grass sods to clean off underneath. My neck is good and my car is good. I just got a tow bill for someone to winch me out. I'll pay that any day of the week and twice on Sunday.

Wow...glad you are okay brother. You don't need any more chit like that!

Sent from my SM-N910P using Tapatalk

jchammond · 01-12-2018, 09:47 PM

Quote:

Originally Posted by JTM88

I’m getting my pumpkin with 4.09s back today and installing it tonight! Quick question I’ll be putting in the Z1 front diff bushings(main bushing is already in) and I was wondering if you reuse that metal spacer that is above the stock bushings.

Sent from my iPhone using Tapatalk

nope; not needed.

Rusty · 01-12-2018, 09:49 PM

Once is enough. you don't need that nightmare again.

Spooler · 01-12-2018, 10:05 PM

Quote:

Originally Posted by Rusty

Once is enough. you don't need that nightmare again.

Noop, I need mud tires.... LOL The state patrol was looking at the car and saying "It doesn't look stuck too bad, see if you can get out." I laughed, with RE11's that are just about gone on the rear. They had to get one of my rear tires on the pavement before I could move. Slick's with grooves just don't cut in muddy grass with a mud puddle on top. The car just sunk. If I get hit again I would not expect anything good. Dead or paralyzed would be my options. Hey, the median sounds good. I was happy as could be.

jchammond · 01-12-2018, 10:07 PM

Quote:

Originally Posted by Kzonts

Are you talking about the black spacers in this pic? I didn't put them back in. I just checked since I couldn't remember... However, I'm not sure if I was supposed to :-). Anyway it's been operating superbly...

Update: I checked the installation guide on the Z1 website and it doesn't show the reuse of those.

These wrenches are the real deal-working out back!

Sent from my iPhone using Tapatalk

Spooler · 01-12-2018, 10:08 PM

^^^^ I love Snap-On hand tools. They are comfy in the hands. It's all I buy for hand tools.

Rusty · 01-12-2018, 10:24 PM

Quote:

Originally Posted by Spooler

^^^^ I love Snap-On hand tools. They are comfy in the hands. It's all I buy for hand tools.

That's all I use.

jchammond · 01-12-2018, 10:30 PM

My intent was to get the "0" offset & i looked up wrong pt# & got the 15*,,,so i ordered the 0 & kept the 15 as well,,,helps get that X-tra torque!

radix023 · 01-13-2018, 05:31 PM

Quote:

Originally Posted by Spooler

Dodged a bullet today. I just about got rear ended again. This time I saw it coming and chose the median that was a big mud pit. Traction control kick in and I sunk. Oh well. Car is fine just some grass sods to clean off underneath. My neck is good and my car is good. I just got a tow bill for someone to winch me out. I'll pay that any day of the week and twice on Sunday.

Good to hear that you are OK.

Here's one to heads-up driving!

Did the perpetrator bear any consequences?

01-11-2018, 05:27 PM	#961 (permalink)
Baronsmokes Premium Member Join Date: May 2017 Location: Bismarck Posts: 1,078 Drives: 2016 370Z Roadster Rep Power: 477008	The upholstery was done localy.The CF is mostly Evo-R.My buddy has been making the other pieces.He made some molds and a vacum set up.He did sill plates,Roll bar,badges,covers,all kinds of stuff.He is working on rear spoiler extension now for aftermarket spoiler on roadster. ZontheRocks likes this.

01-12-2018, 09:11 AM	#962 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 14	I’m getting my pumpkin with 4.09s back today and installing it tonight! Quick question I’ll be putting in the Z1 front diff bushings(main bushing is already in) and I was wondering if you reuse that metal spacer that is above the stock bushings. Sent from my iPhone using Tapatalk Jayhovah likes this. __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal-

01-12-2018, 09:26 PM	#966 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Dodged a bullet today. I just about got rear ended again. This time I saw it coming and chose the median that was a big mud pit. Traction control kick in and I sunk. Oh well. Car is fine just some grass sods to clean off underneath. My neck is good and my car is good. I just got a tow bill for someone to winch me out. I'll pay that any day of the week and twice on Sunday. Rusty, axmea?, Ghostvette and 3 others like this.

01-12-2018, 09:49 PM	#969 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Once is enough. you don't need that nightmare again. Hotrodz, Spooler and jchammond like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-12-2018, 10:08 PM	#972 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	^^^^ I love Snap-On hand tools. They are comfy in the hands. It's all I buy for hand tools. Rusty, Ghostvette, jchammond and 1 others like this.

01-12-2018, 08:39 PM	#965 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 285 Drives: 2014 Nismo Rep Power: 27365	Ordered a new air fuel sensor after the installation of the art pipes apparently broke it.

01-12-2018, 10:30 PM	#974 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	My intent was to get the "0" offset & i looked up wrong pt# & got the 15*,,,so i ordered the 0 & kept the 15 as well,,,helps get that X-tra torque! __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM