What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

JARblue · 10-18-2021, 10:02 AM

Quote:

Originally Posted by Tractionless

Reason for backing?

He was in the turn lane and wanted to go straight.

I had my left hand on the horn while trying to shift into reverse but I missed the damn gate

ZeeingAround · 10-19-2021, 08:39 AM

Two for Tuesday

abm89 · 10-22-2021, 09:24 PM

I took the Z to Winding Road today to get the front sway bar bushings cleaned up and greased as well as have them clean up the endlinks. While it was there, they looked into a weird harmonic noise that I noticed. It doesn't look like any thing obvious. My control arms are fine, as well as the alignment and wheel-balance.

While I was walking to the coffee shop to do some work while I waited, I got to hear the car as it passed by on the street. Sounded good.

Tractionless · 10-29-2021, 09:09 AM

Quote:

Originally Posted by JARblue

He was in the turn lane and wanted to go straight.

I had my left hand on the horn while trying to shift into reverse but I missed the damn gate

Just like the moron drivers here! The world would have ended if the clown made the left and U-turned then another left instead of doing parking lot **** in an intersection.

TreeSemdyZee · 10-29-2021, 12:13 PM

Quote:

Originally Posted by JARblue

He was in the turn lane and wanted to go straight.

I had my left hand on the horn while trying to shift into reverse but I missed the damn gate

Did the same thing in my Juke when a semi turned left in front of me and almost cut the top off the Juke (and my head).

Zingston · 11-05-2021, 11:15 AM

I moved the Z out of the garage today because it started raining. Consequently, I washed my Z today.

abm89 · 11-06-2021, 09:40 PM

I talked with Seb last week about doing a flex-fuel tune on my car. He already sent over a base 93 map so I can get my inspection taken care of. Flashed it today and all the monitors are on. I'll take it for a drive tomorrow as it needs a cold start to complete the drive cycle checks.

After that, I'll connect the ethanol sensor output to the BCM, and we'll start the flex tune!

abm89 · 11-07-2021, 12:24 PM

Inspection passed, registration finally done.

OxZed · 11-07-2021, 09:12 PM

Washed this dirty-bird … summer bug guts took a nasty toll on the magnetic black. Machine polishing it'll be …

Ghostvette · 11-08-2021, 08:54 AM

Quote:

Originally Posted by abm89

I talked with Seb last week about doing a flex-fuel tune on my car. He already sent over a base 93 map so I can get my inspection taken care of. Flashed it today and all the monitors are on. I'll take it for a drive tomorrow as it needs a cold start to complete the drive cycle checks.

After that, I'll connect the ethanol sensor output to the BCM, and we'll start the flex tune!

I thought Texas didn't require emissions testing, then I remembered you live in LA East...

abm89 · 11-08-2021, 01:00 PM

Quote:

Originally Posted by Ghostvette

I thought Texas didn't require emissions testing, then I remembered you live in LA East...

Williamson and Travis county (As well as others in the state) require passing the OBD-II monitor tests. They've been like that for a while. You're allowed to have 1 test listed as "not ready" for 2008 and newer cars. There aren't any smog tests to my knowledge, but I'd like to have the car compliant for at least 47 states. I don't ever plan on living in California, Alaska, or Hawaii. It is honestly not hard to pass, the problem was getting someone to fix my software.

abm89 · 11-11-2021, 11:21 AM

So I was dumb and wired up the wrong pin for flex-fuel. Thankfully the car knows how to not kill itself so I'll fix it later tonight.

I still blame Nissan for using G for green and GR for grey, even though I should have just triple-checked and not double-checked. -_-

Ben370 · 11-11-2021, 06:08 PM

Got my car back from the shop with new gallery gaskets, timing kit, as well as intake and valve cover gaskets since those were pulled to do that stuff.

abm89 · 11-12-2021, 09:49 AM

Quote:

Originally Posted by Ben370

Got my car back from the shop with new gallery gaskets, timing kit, as well as intake and valve cover gaskets since those were pulled to do that stuff.

How much did that run you if you don't mind me asking? My oil pressure is good, but I'm thinking about doing major maintenance at the same time while everything is a part. Oil gallery gaskets, upgraded oil pump, new thermostat, new radiator.

abm89 · 11-12-2021, 09:50 AM

Turns out I had the wiring correct the whole time. The car was being dumb because I connected the battery and turned on the power with a good portion of the dash disconnected. ECU reset fixed it after doing some wiring troubleshooting with Seb.

Now I just have the CEL for the evap sensor, which is expected because it is out of the range specified by the FSM. No worries.

10-19-2021, 08:39 AM	#5687 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86623	Two for Tuesday God-Speed, JARblue, Rusty and 7 others like this. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

10-22-2021, 09:24 PM	#5688 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,384 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	I took the Z to Winding Road today to get the front sway bar bushings cleaned up and greased as well as have them clean up the endlinks. While it was there, they looked into a weird harmonic noise that I noticed. It doesn't look like any thing obvious. My control arms are fine, as well as the alignment and wheel-balance. While I was walking to the coffee shop to do some work while I waited, I got to hear the car as it passed by on the street. Sounded good. God-Speed, JARblue, Rusty and 4 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

11-05-2021, 11:15 AM	#5691 (permalink)
Zingston A True Z Fanatic Join Date: May 2017 Location: Florida Posts: 4,028 Drives: like it's a rental. Rep Power: 2684370	I moved the Z out of the garage today because it started raining. Consequently, I washed my Z today. JARblue, Hotrodz, madwi and 6 others like this.

11-06-2021, 09:40 PM	#5692 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,384 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	I talked with Seb last week about doing a flex-fuel tune on my car. He already sent over a base 93 map so I can get my inspection taken care of. Flashed it today and all the monitors are on. I'll take it for a drive tomorrow as it needs a cold start to complete the drive cycle checks. After that, I'll connect the ethanol sensor output to the BCM, and we'll start the flex tune! JARblue, Hotrodz, old guy and 2 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

11-07-2021, 12:24 PM	#5693 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,384 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Inspection passed, registration finally done. God-Speed, JARblue, Hotrodz and 4 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

11-07-2021, 09:12 PM	#5694 (permalink)
OxZed Base Member Join Date: Dec 2017 Location: N. Carolina Posts: 71 Drives: 2017 Nissan 370Z SPT Rep Power: 7	Washed this dirty-bird … summer bug guts took a nasty toll on the magnetic black. Machine polishing it'll be … God-Speed, Rusty, Hotrodz and 5 others like this.

11-11-2021, 11:21 AM	#5697 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,384 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	So I was dumb and wired up the wrong pin for flex-fuel. Thankfully the car knows how to not kill itself so I'll fix it later tonight. I still blame Nissan for using G for green and GR for grey, even though I should have just triple-checked and not double-checked. -_- JARblue, Hotrodz, sx moneypit and 1 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

11-11-2021, 06:08 PM	#5698 (permalink)
Ben370 Base Member Join Date: Mar 2016 Location: Virginia Posts: 71 Drives: [SOLD] 09 Tour/Sport Rep Power: 3364	Got my car back from the shop with new gallery gaskets, timing kit, as well as intake and valve cover gaskets since those were pulled to do that stuff. Rusty, Hotrodz, abm89 and 3 others like this.

11-12-2021, 09:50 AM	#5700 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,384 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Turns out I had the wiring correct the whole time. The car was being dumb because I connected the battery and turned on the power with a good portion of the dash disconnected. ECU reset fixed it after doing some wiring troubleshooting with Seb. Now I just have the CEL for the evap sensor, which is expected because it is out of the range specified by the FSM. No worries. JARblue, Hotrodz, madwi and 2 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM