What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

onzedge · 09-10-2018, 05:55 AM

Quote:

Originally Posted by Rusty

Plumping for a flux capacitor?

jwick · 09-10-2018, 09:33 AM

Quote:

Originally Posted by madwi

Nice to see the crash bar fits. Wish it would on my G. I had to trim bumper just to get the intercooler to fit and relocate the sump pump.

JARblue · 09-10-2018, 09:53 AM

Just 1 more week and I'll be able to drive the Z again

That is, assuming I've buttoned everything back up by then (highly doubtful lol).

mishuko · 09-10-2018, 01:15 PM

Quote:

Originally Posted by JARblue

Just 1 more week and I'll be able to drive the Z again

That is, assuming I've buttoned everything back up by then (highly doubtful lol).

Lol i scheduled my last maintanence for end of october. Oil change only. Next year ill do a change out of brake and clutch fluid to rbf 600

Also getting quotes for a new exhaust for next year.700 km and its too quiet. Lol damn. Motordyne or fast intentions are my current.

JARblue · 09-10-2018, 01:20 PM

I've got an FI exhaust with one CF can that is busted up pretty good. The rest of the pipes are good though. I bet FI could fab up some straight tail pipes for a few hundred. It'll be much louder. You know, for your mom

jwick · 09-10-2018, 01:31 PM

Quote:

Originally Posted by JARblue

I've got an FI exhaust with one CF can that is busted up pretty good. The rest of the pipes are good though. I bet FI could fab up some straight tail pipes for a few hundred. It'll be much louder. You know, for your mom

**** Bob waited a month and half for Tony to fabricate straight pipes and then he told them they were too busy.

JARblue · 09-10-2018, 01:38 PM

Quote:

Originally Posted by jwick

**** Bob waited a month and half for Tony to fabricate straight pipes and then he told them they were too busy.

lol true... he should have petitioned on the forum for more interest. I want some. I bet Tony would be less hesitant if it weren't just one-off production and he were able to do a batch of them.

mishuko · 09-10-2018, 03:46 PM

Quote:

Originally Posted by JARblue

I've got an FI exhaust with one CF can that is busted up pretty good. The rest of the pipes are good though. I bet FI could fab up some straight tail pipes for a few hundred. It'll be much louder. You know, for your mom

Presto showed me it. Literally scaref the poop outta someone. Literally. Lol i need something i can drive dd and road trip too lol

Quote:

Originally Posted by jwick

**** Bob waited a month and half for Tony to fabricate straight pipes and then he told them they were too busy.

Fk. My local source has a notice 2-3month wait. Maybe i should msg tony on fb be like plssss rush one for me and offer a blowie or something lol

Bah decisions decisions

JARblue · 09-10-2018, 03:49 PM

Quote:

Originally Posted by mishuko

Presto showed me it. Literally scaref the poop outta someone. Literally. Lol i need something i can drive dd and road trip too lol

Oh yeah, that's right. I still haven't gotten to hear them. Bastard brought his new GT-R to ZDayZ instead of the Z

Leingod · 09-11-2018, 04:44 PM

Got the new ramps in. These are the 72 inch RR's. Cheaper than 67's + extenders.

Pearl zed · 09-13-2018, 09:27 PM

Found this old pic.....

JARblue · 09-15-2018, 02:43 AM

Found some time to work on the Z... installed Z1 2-piece rotors

*note* an offset box end wrench does wonders as a makeshift brake pad spreader

Also working on Stebel 300Hz truck horn install. Horn is mounted - just need to wire it up.

God-Speed · 09-15-2018, 06:57 AM

Quote:

Originally Posted by JARblue

Found some time to work on the Z... installed Z1 2-piece rotors

*note* an offset box end wrench does wonders as a makeshift brake pad spreader

Also working on Stebel 300Hz truck horn install. Horn is mounted - just need to wire it up.

That new HORN will come in handy on mopac. I would love to see the reaction of the other driver when that thing goes off!!!!!

Ian B · 09-15-2018, 08:22 AM

Quote:

Originally Posted by JARblue

Found some time to work on the Z... installed Z1 2-piece rotors

*note* an offset box end wrench does wonders as a makeshift brake pad spreader

Also working on Stebel 300Hz truck horn install. Horn is mounted - just need to wire it up.

Let me know when horn working to swing buy and listen to it. Did you remove front bumper to do so?

Ian B

sp911 · 09-15-2018, 04:23 AM

on the way home within 15 minutes i saw a 350 and 2 370's which is rare to see that many in the same day.

09-10-2018, 09:53 AM	#3 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Just 1 more week and I'll be able to drive the Z again That is, assuming I've buttoned everything back up by then (highly doubtful lol). __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

09-10-2018, 01:20 PM	#5 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	I've got an FI exhaust with one CF can that is busted up pretty good. The rest of the pipes are good though. I bet FI could fab up some straight tail pipes for a few hundred. It'll be much louder. You know, for your mom __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

09-11-2018, 04:44 PM	#10 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684397	Got the new ramps in. These are the 72 inch RR's. Cheaper than 67's + extenders. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

09-15-2018, 02:43 AM	#12 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Found some time to work on the Z... installed Z1 2-piece rotors note an offset box end wrench does wonders as a makeshift brake pad spreader Also working on Stebel 300Hz truck horn install. Horn is mounted - just need to wire it up. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

09-15-2018, 04:23 AM	#15 (permalink)
sp911 Enthusiast Member Join Date: Feb 2014 Location: central connecticut Posts: 259 Drives: 2012 370z gun metal Rep Power: 12	on the way home within 15 minutes i saw a 350 and 2 370's which is rare to see that many in the same day.