Need To Vent

Raidernation · 01-11-2017, 01:31 PM

So I just upgraded my stereo. The chop shop was unable to reset the airbag light after countless attempts. The chop shop agreed to let the Nissan dealership try to fix it and they too are unable to reset the airbag light. The dealership replaced the sensor that they thought was the problem. But still no dice.

My car has been at the dealership since Monday. Now I am beginning to get very nervous that something is majorly wrong. My VIN is probably flagged. I hope nothing electrical fails as I will most be denied warranty work. At this point I am beyond pissed. FYI anyone in the Bay Area (Nor Cal) steer clear of Audio Design.

BC416 · 01-11-2017, 01:38 PM

Sucks about the issue OP. Shoot a PM to bigaudiofanat for some help. He did my head unit upgrade and knows the Z in and out when it comes to this kind of stuff.

Louie cat · 01-11-2017, 01:54 PM

This is why I am afraid to upgrade my stereo in my Z. It also sounds like lack of experience on their part. You would think the service dept can pin point the issue ,whats up with that?

Jayhovah · 01-11-2017, 02:05 PM

Quote:

Originally Posted by Louie cat

This is why I am afraid to upgrade my stereo in my Z. It also sounds like lack of experience on their part. You would think the service dept can pin point the issue ,whats up with that?

Another reason to go DIY =) I know it's not for some folks...but changing a stereo is a pretty simple one.

enkei2k · 01-11-2017, 02:08 PM

Quote:

Originally Posted by BC416

Sucks about the issue OP. Shoot a PM to bigaudiofanat for some help. He did my head unit upgrade and knows the Z in and out when it comes to this kind of stuff.

he did my stereo as well and no lights came on...

Raidernation · 01-11-2017, 02:15 PM

Quote:

Originally Posted by Louie cat

This is why I am afraid to upgrade my stereo in my Z. It also sounds like lack of experience on their part. You would think the service dept can pin point the issue ,whats up with that?

When the dealership scanned the car it showed that the sensor in the left door panel was bad. They replaced that sensor and still can't clear the blinking airbag light.

Raidernation · 01-11-2017, 02:17 PM

Quote:

Originally Posted by Jayhovah

Another reason to go DIY =) I know it's not for some folks...but changing a stereo is a pretty simple one.

I also had new components , dynamat, a sub and a amp installed. There is no way that I would personally try to attempt that.

Silly Rabbit · 01-11-2017, 03:04 PM

Is this it? Common issue.

SRS Reset

This may be easier to follow:
It's actually in page 14 of the SRC.pdf file in the 2009 service manual. Here are the steps if you just want to reset the error without checking the code:

1. Turn the ignition from OFF to ON, you don't have to start the car for this. Just press the start button until it gets to the ON state, usually OFF > ACC > ON.
2. The airbag light should turn on, wait until it turns off (it should stay on for 7 secs and then turn off) and then turn the ignition to OFF within 1 second.
3. Wait more than 3 seconds after the ignition turns OFF.
4. Repeat steps 1 to 3, twice. (Total 3 times)

So total you're turning the ignition OFF to ON 3 times and then turn it on 1 more time. This time leave the car in the ON position until the light flashes, the car is now in diagnostic mode for the SRS system. Typically you'd now look in the service manual and count the flashes to see what error it was. I didn't bother and just cleared the error.

To clear the error simply turn the car to OFF again and wait more than a second. When you turn it ON again, the warning flashes should be gone.

From the service manual it looks like there's a specific error for if the Passenger airbag indicator light is malfunctioning. So basically don't turn on the car if you have that disconnected or else you'll have to reset it with these steps as even disconnecting the battery after that point doesn't clear it.

Jayhovah · 01-11-2017, 03:14 PM

Quote:

Originally Posted by Raidernation

I also had new components , dynamat, a sub and a amp installed. There is no way that I would personally try to attempt that.

That is quite a bit more involved... I would DIY it but I certainly understand that most would farm that out.

Quote:

Originally Posted by Raidernation

When the dealership scanned the car it showed that the sensor in the left door panel was bad. They replaced that sensor and still can't clear the blinking airbag light.

Did your shop run new speaker wires for the door speakers? Common practice is to bore a hole through the door wiring harness connector to slide speaker wire through. They may have damaged the wiring related to the airbag sensor.

DOOMMONKEY777 · 01-11-2017, 03:15 PM

check the connectios that they have disconnected, to make sure they didnt damage it while messing with it, the system wont reset untill everything is connected.

PS i am more than sure that is the problem.

370zHawaii · 01-11-2017, 03:36 PM

Sorry to hear this...On my first 09 370Z after audio install, something kept triggering the TPMS light, come to find out it was the speaker wire coming from the crossovers sending signals triggering the sensors etc etc. Don't understand why the airbag light would go off during audio install, I did same install on my last 370Z and audio does not involve removing the steering wheel, sensors etc. even steering wheel controls have no effect on airbag light.

My personal opinion would be to get your money back go somewhere else or DIY and save a ton. You should receive your car back in the same condition if not better than what you left it with to them.

Raidernation · 01-11-2017, 03:50 PM

Quote:

Originally Posted by Jayhovah

That is quite a bit more involved... I would DIY it but I certainly understand that most would farm that out.

Did your shop run new speaker wires for the door speakers? Common practice is to bore a hole through the door wiring harness connector to slide speaker wire through. They may have damaged the wiring related to the airbag sensor.

Yep new speaker wires were installed. This was my initial thought -They damaged a wire that connects the sensors.

Raidernation · 01-11-2017, 03:52 PM

Quote:

Originally Posted by Silly Rabbit

Is this it? Common issue.

SRS Reset

This may be easier to follow:
It's actually in page 14 of the SRC.pdf file in the 2009 service manual. Here are the steps if you just want to reset the error without checking the code:

1. Turn the ignition from OFF to ON, you don't have to start the car for this. Just press the start button until it gets to the ON state, usually OFF > ACC > ON.
2. The airbag light should turn on, wait until it turns off (it should stay on for 7 secs and then turn off) and then turn the ignition to OFF within 1 second.
3. Wait more than 3 seconds after the ignition turns OFF.
4. Repeat steps 1 to 3, twice. (Total 3 times)

So total you're turning the ignition OFF to ON 3 times and then turn it on 1 more time. This time leave the car in the ON position until the light flashes, the car is now in diagnostic mode for the SRS system. Typically you'd now look in the service manual and count the flashes to see what error it was. I didn't bother and just cleared the error.

To clear the error simply turn the car to OFF again and wait more than a second. When you turn it ON again, the warning flashes should be gone.

From the service manual it looks like there's a specific error for if the Passenger airbag indicator light is malfunctioning. So basically don't turn on the car if you have that disconnected or else you'll have to reset it with these steps as even disconnecting the battery after that point doesn't clear it.

I tried this, the chop shop tried this and the dealership tried this.

Breadz · 01-11-2017, 04:10 PM

Quote:

Originally Posted by Raidernation

I tried this, the chop shop tried this and the dealership tried this.

this fixed it for me

Raidernation · 01-11-2017, 06:47 PM

Update - Got a call from the chop shop and they said the Nissan Dealership said the ECU is the problem and needs to be replaced. Hmm we will see what happens. I find it hard to believe the ECU is bad.

01-11-2017, 01:31 PM	#1 (permalink)
Raidernation Base Member Join Date: May 2016 Location: San Jose, Ca Posts: 174 Drives: 2016 GM Base 7AT Rep Power: 9	Need To Vent So I just upgraded my stereo. The chop shop was unable to reset the airbag light after countless attempts. The chop shop agreed to let the Nissan dealership try to fix it and they too are unable to reset the airbag light. The dealership replaced the sensor that they thought was the problem. But still no dice. My car has been at the dealership since Monday. Now I am beginning to get very nervous that something is majorly wrong. My VIN is probably flagged. I hope nothing electrical fails as I will most be denied warranty work. At this point I am beyond pissed. FYI anyone in the Bay Area (Nor Cal) steer clear of Audio Design. __________________ 2016 7AT GM Base: Fast Intentions CBE 18" Res, Z1 Rear Diff Cover, Quaife LSD, Nismo S-Sport Suspension, Nismo Body Brace Kit, White Line Front Sway Bar, SPL Front End Links, Energy Rear Bushing, Z1 Post MAF Silicone Tubes w/ K&N Drop-in Filters

01-11-2017, 01:38 PM	#2 (permalink)
BC416 Track Member Join Date: Jun 2014 Location: NJ Age: 37 Posts: 718 Drives: 2012 KAD 6MT Rep Power: 592	Sucks about the issue OP. Shoot a PM to bigaudiofanat for some help. He did my head unit upgrade and knows the Z in and out when it comes to this kind of stuff. blackcherry20 likes this. __________________ F.I. / K&N / 180 / Forgestar

01-11-2017, 03:04 PM	#8 (permalink)
Silly Rabbit Track Member Join Date: Sep 2013 Location: Brookston, IN Age: 54 Posts: 683 Drives: '12 PW Touring Sport Rep Power: 619	Is this it? Common issue. SRS Reset This may be easier to follow: It's actually in page 14 of the SRC.pdf file in the 2009 service manual. Here are the steps if you just want to reset the error without checking the code: 1. Turn the ignition from OFF to ON, you don't have to start the car for this. Just press the start button until it gets to the ON state, usually OFF > ACC > ON. 2. The airbag light should turn on, wait until it turns off (it should stay on for 7 secs and then turn off) and then turn the ignition to OFF within 1 second. 3. Wait more than 3 seconds after the ignition turns OFF. 4. Repeat steps 1 to 3, twice. (Total 3 times) So total you're turning the ignition OFF to ON 3 times and then turn it on 1 more time. This time leave the car in the ON position until the light flashes, the car is now in diagnostic mode for the SRS system. Typically you'd now look in the service manual and count the flashes to see what error it was. I didn't bother and just cleared the error. To clear the error simply turn the car to OFF again and wait more than a second. When you turn it ON again, the warning flashes should be gone. From the service manual it looks like there's a specific error for if the Passenger airbag indicator light is malfunctioning. So basically don't turn on the car if you have that disconnected or else you'll have to reset it with these steps as even disconnecting the battery after that point doesn't clear it. DYNAZOR likes this. __________________ NISMO R Tune Intakes \ Fast Intentions RHFC \ Borla CBE \ EcuTek Tuned\ SPL Camber Arms \ Powertrix Coilovers \ Swift Springs \ Avant Garde \ Wicked CAS \ Morimoto XB Halos \ Custom Fenders \ Hotchkis Sways \ NLP Splitter Last edited by Silly Rabbit; 01-11-2017 at 03:10 PM.

01-11-2017, 03:15 PM	#10 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Oct 2010 Location: Crooklyn Posts: 1,008 Drives: 370Z 6psd-sport-pkg Rep Power: 21	check the connectios that they have disconnected, to make sure they didnt damage it while messing with it, the system wont reset untill everything is connected. PS i am more than sure that is the problem. __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane Last edited by DOOMMONKEY777; 01-11-2017 at 03:17 PM.

01-11-2017, 03:36 PM	#11 (permalink)
370zHawaii Enthusiast Member Join Date: Oct 2010 Location: Sun Shining State Posts: 294 Drives: A Starship Rep Power: 15	Sorry to hear this...On my first 09 370Z after audio install, something kept triggering the TPMS light, come to find out it was the speaker wire coming from the crossovers sending signals triggering the sensors etc etc. Don't understand why the airbag light would go off during audio install, I did same install on my last 370Z and audio does not involve removing the steering wheel, sensors etc. even steering wheel controls have no effect on airbag light. My personal opinion would be to get your money back go somewhere else or DIY and save a ton. You should receive your car back in the same condition if not better than what you left it with to them. Last edited by 370zHawaii; 01-11-2017 at 03:39 PM.

01-11-2017, 01:54 PM	#3 (permalink)
Louie cat Enthusiast Member Join Date: Mar 2016 Location: florida Posts: 261 Drives: 2010 Nismo 370z Rep Power: 142	This is why I am afraid to upgrade my stereo in my Z. It also sounds like lack of experience on their part. You would think the service dept can pin point the issue ,whats up with that?

01-11-2017, 06:47 PM	#15 (permalink)
Raidernation Base Member Join Date: May 2016 Location: San Jose, Ca Posts: 174 Drives: 2016 GM Base 7AT Rep Power: 9	Update - Got a call from the chop shop and they said the Nissan Dealership said the ECU is the problem and needs to be replaced. Hmm we will see what happens. I find it hard to believe the ECU is bad. __________________ 2016 7AT GM Base: Fast Intentions CBE 18" Res, Z1 Rear Diff Cover, Quaife LSD, Nismo S-Sport Suspension, Nismo Body Brace Kit, White Line Front Sway Bar, SPL Front End Links, Energy Rear Bushing, Z1 Post MAF Silicone Tubes w/ K&N Drop-in Filters

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need to vent about this	Business Kat	The370Z.com Feedback, Suggestions & Questions	2	02-20-2015 03:38 AM
Is it possible to have the ac in off position and the vent shut off?	jayl	Exterior & Interior	15	01-18-2012 04:47 PM
sorry time to vent	sonic370	Nissan 370Z General Discussions	10	08-02-2011 12:09 AM