positioning shift knob..

kennyz · 10-01-2016, 01:38 PM

Quote:

Originally Posted by JARblue

Sounds like you got it all sorted

But just to follow up ... the stock knob has gobs of RED threadlocker, which Loctite refers to as "high strength permanent". This is why the knob is so damn hard to remove. The blue threadlocker is "medium strength removable". Loctite Threadlocker Colors. Apply a small line of it across several threads of the shifter assembly (easier than trying to apply it inside the knob).

Yep I am going to go buy the loctite now. It just bothers me how some people get to align it right and for some reason mine doesn't

2016 370z · 10-01-2016, 05:59 PM

I saw from a previous thread that you can use a couple of 3/8" x 1 1/4 Neoprene washers from lowes/home depot for about $0.50. That way you can still easily remove your shift knob to show off to your buddies or whatnot. Loctite would be a hassle to take remove in the future.

I used it to align the turtle on my Tommy Kaira shift knob. It gives you room to play with to make sure it is exactly where you want it while still keeping the knob on tight.

kennyz · 10-01-2016, 07:29 PM

Quote:

Originally Posted by 2016 370z

I saw from a previous thread that you can use a couple of 3/8" x 1 1/4 Neoprene washers from lowes/home depot for about $0.50. That way you can still easily remove your shift knob to show off to your buddies or whatnot. Loctite would be a hassle to take remove in the future.

I used it to align the turtle on my Tommy Kaira shift knob. It gives you room to play with to make sure it is exactly where you want it while still keeping the knob on tight.

i already bought the threadlocker

it just doesnt make sense to me how others can allign it easily but i cant lol

SouthArk370Z · 10-01-2016, 08:43 PM

Quote:

Originally Posted by kennyz

i already bought the threadlocker

it just doesnt make sense to me how others can allign it easily but i cant lol

The Locktite will do a good job (unless you get real rough with your shifting).

To position knob without Locktite:
1) Thread jam nut onto shaft until it bottoms out
2) Thread knob onto shaft until it hits the jam nut or bottoms out
3) Unscrew knob until it is in correct position
4) Tighten jam nut against bottom of knob

10-01-2016, 05:59 PM	#17 (permalink)
2016 370z Base Member Join Date: Jun 2016 Location: San Francisco, CA Posts: 101 Drives: 16 370z GM 6MT Rep Power: 9	I saw from a previous thread that you can use a couple of 3/8" x 1 1/4 Neoprene washers from lowes/home depot for about $0.50. That way you can still easily remove your shift knob to show off to your buddies or whatnot. Loctite would be a hassle to take remove in the future. I used it to align the turtle on my Tommy Kaira shift knob. It gives you room to play with to make sure it is exactly where you want it while still keeping the knob on tight. Last edited by 2016 370z; 10-01-2016 at 06:04 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] ZELE shift knob $250+your oem shift knob	rAiN	Parts for sale (Private Classifieds)	12	08-13-2015 07:41 PM
Installed Alcantara shift boot and Nismo Ti Shift Knob	austex	Exterior & Interior	17	09-21-2014 08:15 PM
[FOR SALE] Stock Shift knob & custom CFE shift boot	edub370	Parts for sale (Private Classifieds)	4	08-21-2013 01:23 PM
Shift knob installation? Shift knob recommendations?	Gibby1113	DIY Section (Do-It-Yourself)	21	05-30-2013 08:08 PM
SOLD: 7AT Red/Carbon Shift knob with OEM 6MT Shift boot (SW Florida)	TMAN1985	Parts for sale (Private Classifieds)	8	04-23-2012 10:01 PM