Hello! Would really appreciate some help. I dug myself into a pretty deep hole. First off the problem occurred on a MT 2009 370z that has a touring package with
|
|
LinkBack | Thread Tools | Display Modes |
08-01-2016, 11:39 PM | #1 (permalink) |
Base Member
Join Date: May 2015
Location: Nashville, TN
Posts: 79
Drives: MB 370z, 6.0L 240sx
Rep Power: 10 |
Ignition Failure (Need Help)
Hello! Would really appreciate some help. I dug myself into a pretty deep hole. First off the problem occurred on a MT 2009 370z that has a touring package with the push to start button.
Just going to hop straight into it, but lately starting my car has been a bit of a hassle. With the clutch fully depressed I push to start and it will cycle to ACC mode. I will tap the push to start again and it will cycle to ON mode but the engine will not try to turn over. After repeating the process about 10 more times the engine will decide to turn over for some strange reason. Today I got an inspection at Nissan and found out I had a bad battery so i got that replaced thinking it may help the problem in which it didn't really. A friend at Nissan said it may be the interlock switch on the clutch. So i decided to take that off and open it up to clean off the contacts that had a little corrosion on them. I re-installed it and now the lights on my push to start button do not turn on (ex. ACC, ON). The problem still persists and now engine doesn't turn over at all sadly. Now a bit worried I decided to turn towards the steering lock. I opened up the fuse box and removed the steering lock fuse while the car was in accessory mode and reinstalled everything and the problem is still there. I'm pretty worried about my car and would really appreciate some help. Thanks for reading. |
08-02-2016, 06:21 AM | #2 (permalink) |
Enthusiast Member
Join Date: Jul 2016
Location: Iggyland
Posts: 409
Drives: enterTrollment
Rep Power: 2518 |
Check ur clutch switch. It's probably dirty. Take it off the car and blast it with contact cleaner (or MAF cleaner) and see if that helps. A dab if WD40 will clean the contact too.
__________________
temporary newb suit.. i hope |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do I log Ignition Correction? | osbornsm | Tuning | 5 | 09-01-2016 11:28 PM |
Cooling fan on with ignition on | morice13 | Engine & Drivetrain | 4 | 08-10-2015 11:25 AM |
key n ignition | lachap55 | Exterior & Interior | 9 | 03-04-2015 09:14 PM |
MSD ignition control. | someday | Tuning | 2 | 08-13-2011 12:55 PM |