Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   Exhaust (370Z - 2013) Coupe (http://www.the370z.com/nissan-370z-general-discussions/115742-exhaust-370z-2013-coupe.html)

Otis 08-01-2016 06:52 AM

Exhaust (370Z - 2013) Coupe
 
I have Invidia Gemini - like the sound but would be okay with it even louder. any suggestions?

Thanks

Guyfromthere 08-01-2016 08:04 AM

Get non-res test pipes :)

madeinjapan 08-01-2016 08:35 AM

Quote:

Originally Posted by Otis (Post 3527649)
I have Invidia Gemini - like the sound but would be okay with it even louder. any suggestions?

Thanks

remove mufflers

2011 Nismo#91 08-01-2016 08:37 AM

AAM short tails and non resonated test pipes, good+cheap+loud.

CedzZ34 08-01-2016 10:39 AM

Non-resonated or resonated test pipes should do the trick. I couldn't imagine you cutting apart or replacing that nice exhaust system...

Ni9TFiVE 08-02-2016 03:31 PM

My Z came with an Invidia exhaust and I didn't like it at all. So I got a muffler delete at first, then a resonator delete after because I didn't think it was loud enough. Now it sounds like a beast!!

I want to buy some test pipes soon.

Ni9TFiVE 08-02-2016 03:32 PM

Quote:

Originally Posted by CedzZ34 (Post 3527762)
Non-resonated or resonated test pipes should do the trick. I couldn't imagine you cutting apart or replacing that nice exhaust system...

I did to mine lmao

I wouldn't of done it if i bought the exhaust tho. It already came with my Z

mishuko 08-02-2016 03:45 PM

gt haus or tomei.

pay to play big boy.

TexasChuck 08-02-2016 05:02 PM

Exhaust!
 
I am exhausted, hearing about exhaust.

Otis 08-10-2016 08:37 AM

Correct - not going to cut up a new system. is test pipe install hard? seems like i seem threads some of the bolts are a pain?

madeinjapan 08-10-2016 09:05 AM

Quote:

Originally Posted by Otis (Post 3533556)
Correct - not going to cut up a new system. is test pipe install hard? seems like i seem threads some of the bolts are a pain?

https://media.giphy.com/media/yoJC2K...EngA/giphy.gif

Jayhovah 08-10-2016 10:17 AM

Quote:

Originally Posted by Otis (Post 3533556)
Correct - not going to cut up a new system. is test pipe install hard? seems like i seem threads some of the bolts are a pain?

Yes, it is known as "The Demon Bolt".. I believe that referrs to the nut that threads onto the top stud (which is installed on the cat flange).

I soaked it in penetrating oil and one of the studs still broke on me.

It's not bad as long as you accept there is a good possibility you will break that stud. Not a big deal since the test pipes will use nut/bolt in its place anyway.

Take your intakes out so you can reach it with a LONG STRAIGHT (no swivels) 1/2" extension and then either use a big breaker bar or strong impact gun. Make sure you have some bolt extractors on hand if you start rounding the nut off. That is what happened on my drivers side (the one where the stud finally broke).


All times are GMT -5. The time now is 01:08 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2