I've been noticing lately, downshifting QUICKLY into 5th gear from 6th will create a scratching type of noise, but if I do it very slowly it will work fine. Very
|
|
LinkBack | Thread Tools | Display Modes |
03-22-2016, 09:18 AM | #1 (permalink) |
Base Member
Join Date: Dec 2015
Location: Glendale,CA
Posts: 35
Drives: 2010 370Z Sport 6SM
Rep Power: 10 |
6th to 5th downshifting crunch noise!?
I've been noticing lately, downshifting QUICKLY into 5th gear from 6th will create a scratching type of noise, but if I do it very slowly it will work fine. Very cringy. From Google i'm assuming this is an extremely common problem amongst Z's, currently a 2010 370Z and I just hit 19k miles experiencing this, (Got it at 17k). I'm not under a warranty either.
Any one know what the right thing to do here would be? Cheapest way as well. |
03-22-2016, 11:12 AM | #3 (permalink) |
Premium Member
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324198 |
Sounds like either the clutch is not disengaging properly or the synchro is getting worn. It might help to change the trans lube and maybe switch to a high performance lube. Plenty of threads about which lube is "best." Clutch system test/adjustment procedures should be in the FSM.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma |
03-22-2016, 12:52 PM | #5 (permalink) |
A True Z Fanatic
Join Date: Aug 2012
Location: Surface of the sun.
Posts: 13,159
Drives: '18 GTI Autobahn DSG
Rep Power: 1387 |
I had a similar issue in my previous car and it was that the clutch lever was worn out (it got so bad that it'd pop out of gear and/or want to stall when taking off from a dead stop).
Could be synchro's too. |
03-22-2016, 12:54 PM | #6 (permalink) |
Base Member
Join Date: Nov 2010
Location: Cedar Rapids, Iowa
Posts: 144
Drives: 2010 370Z Blue 6MT
Rep Power: 15 |
I had the opposite problem. When shifting from 5th to 6th under any kind of load I would get a nasty grinding. If I shifted slowly and carefully, all was fine. I took it to the dealer, told them about the problem, they verified the problem, and since I was still under warranty, Nissan replaced my transmission for free. Now everything shifts fine. I forgot to ask the dealer if Nissan gave me a new or factory rebuilt tranny. I had 27,000 miles on my Z and had this done in October, 2015 since my warranty expired in November, 2015.
|
03-22-2016, 01:47 PM | #8 (permalink) |
A True Z Fanatic
Join Date: May 2011
Location: KCMO
Posts: 3,458
Drives: 09 370z S/T 6MT
Rep Power: 20 |
i was that guy. 6th gear synchro went. trans replaced under warranty. digitonium had this issue with a couple transmissions as well think
__________________
09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways
326whp/268tq |
03-22-2016, 01:53 PM | #9 (permalink) |
A True Z Fanatic
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440 |
As everyone else has mentioned ... synchros are going. If under warranty, Nissan will replace the whole transmission to fix them. Otherwise, don't worry about it. Just be patient with the shift so that it doesn't grind.
__________________
2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed | |
03-22-2016, 02:01 PM | #10 (permalink) | |
A True Z Fanatic
Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521 |
Quote:
then was that u that said the dealer did a f-ked up installation and u had to go back to realign the gates? |
|
03-22-2016, 03:11 PM | #11 (permalink) |
A True Z Fanatic
Join Date: May 2011
Location: KCMO
Posts: 3,458
Drives: 09 370z S/T 6MT
Rep Power: 20 |
hah that was not me. maybe there are more 6th gear synchro failures than anyone knew?
__________________
09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways
326whp/268tq |
03-22-2016, 03:45 PM | #12 (permalink) |
A True Z Fanatic
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440 |
FWIW, I went back and forth with my warranty company on this. They insisted that my 5th-6th gear synchros could be serviced by a transmission shop. But two different Nissan dealers confirmed that they do not work on internal parts on the 370Z MT and that they would replace the entire transmission.
I will likely end up having the dealer do the work because the warranty company is making it too much of a hassle to bother saving them money. I was hoping to buy the transmission myself from Z1 and then pay a competent shop for labor and have them install a new clutch and flywheel at the same time.
__________________
2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed | |
03-22-2016, 05:55 PM | #15 (permalink) |
Base Member
Join Date: Dec 2015
Location: Glendale,CA
Posts: 35
Drives: 2010 370Z Sport 6SM
Rep Power: 10 |
Yeah i'm not really in the budget for an entire new transmission at the moment.. How much do those go for anyway? And will it everything be good if I leave it be for now; slow shifts from 5th, etc.?
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AT not downshifting when hot? | BrandonT | Track / Autocross / Drifting / Dragstrip | 1 | 06-06-2015 11:25 AM |
Downshifting with an AT | AngelNismo | Engine & Drivetrain | 10 | 05-24-2015 10:30 AM |
Crunch on 2nd | 370Fan2000 | Engine & Drivetrain | 12 | 12-08-2011 02:36 AM |
Crunch | antman22 | The Lounge (Off Topic) | 9 | 07-31-2010 09:25 PM |
downshifting | supraman626 | Engine & Drivetrain | 7 | 12-28-2009 02:53 PM |