Flapping sound when over 5K RPMs

Duc_Z09 · 12-19-2015, 12:47 PM

Quote:

Originally Posted by Leingod

I had the same issue. 09 model also. Almost like a metal flapping noise coming from behind the steering column. Weird thing was that it went away on its own after a few months. I think after I did a basic oil change.

That would implicate the undertray since you have to remove and replace it to do an oil change. I'd think a loose undertray would react more to speed rather than rpm though.

Bad Boy · 12-19-2015, 12:51 PM

Quote:

Originally Posted by Leingod

I had the same issue. 09 model also. Almost like a metal flapping noise coming from behind the steering column. Weird thing was that it went away on its own after a few months. I think after I did a basic oil change.

Can you look at the video and see if this is still similar to your previous issue?

Duc_Z09 · 12-19-2015, 12:56 PM

Quote:

Originally Posted by Chuck33079

Trusting the dealer to fix it is asinine. They did it in the first place. Fixing it would be them admitting to a mistake. Get your hands dirty and figure it out. Honestly, do you want to give the dealer your car with instructions to test drive it hanging out in the top of the tach? "Here, go beat the piss out of my car and see if there's something wrong."

This is exactly why I've done 100% of my own maintenance from the day I got the car with 39k on the odometer; I don't trust dealerships to treat my car like I'd treat my car. So far I've done oil/filter changes, a new set of spark plugs, cabin filter ('09 didn't come with one), new battery, transmission fluid, differential fluid, and mounted/balanced a new set of 285/35/19 Potenza Pole Positions for the rear (a buddy has the equipment). I'll replace brake pads and fluid once I decide what I want... I've got about 58k on it now, 2 years this January.

The only thing I didn't do myself was the alignment (rears were at -2.2 camber for some reason

).

Chuck33079 · 12-19-2015, 01:05 PM

Quote:

Originally Posted by Duc_Z09

This is exactly why I've done 100% of my own maintenance from the day I got the car with 39k on the odometer; I don't trust dealerships to treat my car like I'd treat my car. So far I've done oil/filter changes, a new set of spark plugs, cabin filter ('09 didn't come with one), new battery, transmission fluid, differential fluid, and mounted/balanced a new set of 285/35/19 Potenza Pole Positions for the rear (a buddy has the equipment). I'll replace brake pads and fluid once I decide what I want... I've got about 58k on it now, 2 years this January.

The only thing I didn't do myself was the alignment (rears were at -2.2 camber for some reason

).

Exactly. When you ask a dealer to do fluid changes, brakes, etc, you're going to have their most inexperienced tech do those jobs. You keep your good techs for the more complicated stuff. The oil change monkey is the lowest rung on the ladder. DIY or GOOD local independent shop. Unless it's under warranty, F the dealer.

Buying tools is cheaper than paying labor.

Leingod · 12-19-2015, 01:36 PM

Quote:

Originally Posted by Duc_Z09

That would implicate the undertray since you have to remove and replace it to do an oil change. I'd think a loose undertray would react more to speed rather than rpm though.

Correct. But the undertray was tight beforehand. The sound was coming above the undertray.

Quote:

Originally Posted by Bad Boy

Can you look at the video and see if this is still similar to your previous issue?

Same exact sound. It's definitely in relation with RPM and not speed. It hasn't hurt my car at all that I've seen. So don't worry to much about it. It is an annoying sound though. If mine comes back when I pull mine out of storage in the spring, i'll start tearing stuff apart.

Bad Boy · 12-19-2015, 01:51 PM

Quote:

Originally Posted by Leingod

Correct. But the undertray was tight beforehand. The sound was coming above the undertray.

Same exact sound. It's definitely in relation with RPM and not speed. It hasn't hurt my car at all that I've seen. So don't worry to much about it. It is an annoying sound though. If mine comes back when I pull mine out of storage in the spring, i'll start tearing stuff apart.

Yeah I just checked the undertray and it seems nice and tight. Nothing looks loose. And when I rev up to the limit, 5K, no noise.
Since you said it went away on its own, ima stop stressing out with the dealer and just let it be for now.
I guess the only sure way to know what it is, is for something to actually/fully break.

Leingod · 12-19-2015, 02:12 PM

Quote:

Originally Posted by Bad Boy

Yeah I just checked the undertray and it seems nice and tight. Nothing looks loose. And when I rev up to the limit, 5K, no noise.
Since you said it went away on its own, ima stop stressing out with the dealer and just let it be for now.
I guess the only sure way to know what it is, is for something to actually/fully break.

Yea. Don't worry to much about it. About 3-4 months after I drove the car is when it went away. I did a few hard launches and shift changes during those times.

Chuck33079 · 12-19-2015, 02:51 PM

Quote:

Originally Posted by Bad Boy

Yeah I just checked the undertray and it seems nice and tight. Nothing looks loose. And when I rev up to the limit, 5K, no noise.
Since you said it went away on its own, ima stop stressing out with the dealer and just let it be for now.
I guess the only sure way to know what it is, is for something to actually/fully break.

Actually, you should take the undertray off and have a look before you assume everything is ok. Just because it doesn't happen when the vehicle is stationary and revving doesn't mean there isn't something contacting when the car is moving and at high rpm.

Ommateal · 12-19-2015, 03:11 PM

Yeah this would sketch me out hard. ^ deff make sure nothing is making contacts or loose, jack it up if you can and check everything.

DOOMMONKEY777 · 12-19-2015, 09:13 PM

Mech could have left something in the engine bay???

sx moneypit · 12-21-2015, 08:11 AM

Quote:

Originally Posted by DOOMMONKEY777

Mech could have left something in the engine bay???

mishuko · 12-21-2015, 08:20 AM

i don't trust dealerships...

the way i look at it is look at the shop. look what's sitting in the shop. if cars are more expensive than yours sitting in the shop then there is a good chance they will treat your car well.

if it's your standard nissan/toyota dealership i can guarantee they don't see sports cars all that often and the techs will be more inclined to go for a 'loop'.

oh and they'll make up bs excuses as to why you need to pay them more of your hard earned cash.

there was a guy posting earlier this year saying how he heard the techs revving his engine in the shop. i'd be pissed off if they rev'd my engine significantly for no damn reason.

hope you can figure out wtf is causing it. i agree with chuck... either do it yourself or ask another mechanic at a non-dealership look at your car.

jwick · 12-21-2015, 09:52 AM

From my experience Nissan service monkeys aren't worth a ****. They can't diagnose ****. All they can do is follow the red bouncing ball on their computer screen. I hate when I go to the 'specialist' for repair help and I know more than all the mofos there.

Bad Boy · 12-27-2015, 02:50 AM

Quote:

Originally Posted by Leingod

Yea. Don't worry to much about it. About 3-4 months after I drove the car is when it went away. I did a few hard launches and shift changes during those times.

Looks like you were right... After just about a week of my "normal" driving, it seems that the noise has just gone away.
I feel like there might be something loose behind the dash or something. Oh well. No noise anymore.

12-19-2015, 03:11 PM	#39 (permalink)
Ommateal Base Member Join Date: Oct 2015 Location: Dover, Ohio. Age: 37 Posts: 209 Drives: 2010 370z sport 6m Rep Power: 10	Yeah this would sketch me out hard. ^ deff make sure nothing is making contacts or loose, jack it up if you can and check everything. __________________ Red 370z Sport 6m Mods: Stillen 25 row Race Oil cooler\|FIXED ESCL\|Muffler delete\|TEIN Springs\|Tint\|Varrstoen ES2 Rims\|NRG Stealth Knob\|Kenwood touchscreen\|

12-19-2015, 09:13 PM	#40 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Oct 2010 Location: Crooklyn Posts: 1,008 Drives: 370Z 6psd-sport-pkg Rep Power: 21	Mech could have left something in the engine bay??? __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane

12-21-2015, 09:52 AM	#43 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	From my experience Nissan service monkeys aren't worth a **. They can't diagnose *. All they can do is follow the red bouncing ball on their computer screen. I hate when I go to the 'specialist' for repair help and I know more than all the mofos there. onzedge and Ghostvette like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build Last edited by jwick; 12-23-2015 at 10:34 AM.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High rpms	Red_Lionn	Engine & Drivetrain	0	01-28-2013 09:56 AM
What RPMs get you the most gas mileage?	jcasti07	Nissan 370Z General Discussions	17	10-12-2012 07:55 AM
why does my car bog at lower rpms?	DJVendetta	Engine & Drivetrain	13	10-02-2011 05:43 PM
Jerky at low RPMS	khtso	Nissan 370Z General Discussions	68	03-16-2011 09:24 PM
rpms	chotyme	Nissan 370Z General Discussions	5	11-11-2009 08:26 PM

12-21-2015, 08:20 AM	#42 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	i don't trust dealerships... the way i look at it is look at the shop. look what's sitting in the shop. if cars are more expensive than yours sitting in the shop then there is a good chance they will treat your car well. if it's your standard nissan/toyota dealership i can guarantee they don't see sports cars all that often and the techs will be more inclined to go for a 'loop'. oh and they'll make up bs excuses as to why you need to pay them more of your hard earned cash. there was a guy posting earlier this year saying how he heard the techs revving his engine in the shop. i'd be pissed off if they rev'd my engine significantly for no damn reason. hope you can figure out wtf is causing it. i agree with chuck... either do it yourself or ask another mechanic at a non-dealership look at your car.