Window problem, maybe...

MeetJoeAsian · 10-31-2009, 01:31 PM

A few days ago, after driving a few minutes, I noticed wind noise coming from my driver's window, so I rolled up and it inched up and sealed...I thought nothing of it, and thought maybe somehow I rolled the window down and didn't pull up all the way...then it happened again later at another time, and same situation...so I thought maybe I didn't pull it up all the way AGAIN...then I started wondering if there was a problem with it...

then this morning, I got in my car, went to Starbux and got my "Iced, venti, quad, 2.5 pump hazelnut, soy latte in a double cup", and when I left, I noticed it again...I had stopped by McDonalds before that, and actually went inside (instead of drive-thru) and got me a sausage-egg-cheese biscuit and a sausage-egg mcmuffin, but I don't remember rolling my windows down other than when I first left my house...but I rolled both windows down, and pulled them up and allowed the one-touch up to pull them up instead of holding onto the switches...everytime I noticed the problem, I'd pull the passenger window too to see if it was affecting the other side, but it was only on the driver's side...

anyone else having this problem???

Matt · 10-31-2009, 01:34 PM

When you open and shut your door, is the auto-seal function (made up that term, btw) working? Meaning, is it going up and down about a centimeter as you open and shut the door? If the auto-seal is working when you open, but not when closing the door, that could be your problem.

I'd take mine to the dealer if that function was causing problems.

Modshack · 10-31-2009, 01:37 PM

Re-set your windows. It's in the manual. They go wonky every once in awhile..

kenchan · 10-31-2009, 01:51 PM

i read a lot of food and drinks and forgot to read about some problem the op had...

MeetJoeAsian · 10-31-2009, 01:56 PM

Quote:

Originally Posted by Matt

When you open and shut your door, is the auto-seal function (made up that term, btw) working? Meaning, is it going up and down about a centimeter as you open and shut the door? If the auto-seal is working when you open, but not when closing the door, that could be your problem.

I'd take mine to the dealer if that function was causing problems.

I thought that may be it too...so I'd open the door, and when I closed, it went up....but I think that still may be the problem because the distance the window was down seems to be about the same as when it auto-seals

MeetJoeAsian · 10-31-2009, 01:56 PM

Quote:

Originally Posted by Modshack

Re-set your windows. It's in the manual. They go wonky every once in awhile..

I will try that...thanX

MeetJoeAsian · 10-31-2009, 01:58 PM

Quote:

Originally Posted by kenchan

i read a lot of food and drinks and forgot to read about some problem the op had...

haha..I threw that in to see if anyone would notice that

kenchan · 10-31-2009, 07:11 PM

Quote:

Originally Posted by MeetJoeAsian

haha..I threw that in to see if anyone would notice that

yah, i bet your wife is pretty tired of listening to your tangents, huh?

GET TO THE POINT!

<= mrs. meetjoeasian

j.arnaldo · 11-01-2009, 01:05 PM

I guess it's an old bug Nissan's failed to address. I had to get a new driver's side power window motor for my '04.5 Touring Coupe early this year ($161.00). The passenger's side one's acting up, too! So, time to dole out more moolah to Advance Auto parts! Rats!

nicknick · 11-01-2009, 04:53 PM

Quote:

Originally Posted by MeetJoeAsian

A few days ago, after driving a few minutes, I noticed wind noise coming from my driver's window, so I rolled up and it inched up and sealed...I thought nothing of it, and thought maybe somehow I rolled the window down and didn't pull up all the way...then it happened again later at another time, and same situation...so I thought maybe I didn't pull it up all the way AGAIN...then I started wondering if there was a problem with it...

then this morning, I got in my car, went to Starbux and got my "Iced, venti, quad, 2.5 pump hazelnut, soy latte in a double cup", and when I left, I noticed it again...I had stopped by McDonalds before that, and actually went inside (instead of drive-thru) and got me a sausage-egg-cheese biscuit and a sausage-egg mcmuffin, but I don't remember rolling my windows down other than when I first left my house...but I rolled both windows down, and pulled them up and allowed the one-touch up to pull them up instead of holding onto the switches...everytime I noticed the problem, I'd pull the passenger window too to see if it was affecting the other side, but it was only on the driver's side...

anyone else having this problem???

Ok joe, there is your problem....Mcdonalds! LOL:. anyway hope your car's windows are ok.

Dallas-Z · 11-01-2009, 09:27 PM

Turn the car to the on position, but not running, hold the windows control to the up position for 7+ seconds, should reset the position for the windows.

dejavu1611 · 11-02-2009, 08:44 PM

haha, thanks. I really needed that. I installed my new headunit and it reset all the electronics. My window would go down an inch but did not automatically raise it back up. Was about to send it to the dealership.

dudafunk · 01-04-2010, 10:09 PM

same problem. how to reset?

....Turn the car to the on position, but not running??????/??? how?

schrute · 01-04-2010, 10:29 PM

^Press the start button briefly without holding it down, it will go to "acc" mode.

Press it again without holding it down, it will go to "on".

Think old school iginition switches and the first two settings before "start".

dudafunk · 01-07-2010, 02:06 PM

resolved

10-31-2009, 01:31 PM	#1 (permalink)
MeetJoeAsian Enthusiast Member Join Date: Aug 2009 Location: Houston, TX Posts: 342 Drives: 350Z to G35c to 370Z Rep Power: 16	Window problem, maybe... A few days ago, after driving a few minutes, I noticed wind noise coming from my driver's window, so I rolled up and it inched up and sealed...I thought nothing of it, and thought maybe somehow I rolled the window down and didn't pull up all the way...then it happened again later at another time, and same situation...so I thought maybe I didn't pull it up all the way AGAIN...then I started wondering if there was a problem with it... then this morning, I got in my car, went to Starbux and got my "Iced, venti, quad, 2.5 pump hazelnut, soy latte in a double cup", and when I left, I noticed it again...I had stopped by McDonalds before that, and actually went inside (instead of drive-thru) and got me a sausage-egg-cheese biscuit and a sausage-egg mcmuffin, but I don't remember rolling my windows down other than when I first left my house...but I rolled both windows down, and pulled them up and allowed the one-touch up to pull them up instead of holding onto the switches...everytime I noticed the problem, I'd pull the passenger window too to see if it was affecting the other side, but it was only on the driver's side... anyone else having this problem??? __________________ http://facebook.com/meetjoeasian

10-31-2009, 01:37 PM	#3 (permalink)
Modshack A True Z Fanatic Join Date: Mar 2009 Location: Greenville NC Posts: 2,883 Drives: 370Z Sport Rep Power: 976	Re-set your windows. It's in the manual. They go wonky every once in awhile.. __________________ Steal my car! (SOLD)...Now Porsche Cayman S Oil Cooler DIY: Here!

11-01-2009, 01:05 PM	#9 (permalink)
j.arnaldo Banned Join Date: Oct 2009 Location: Puerto Rico Posts: 937 Drives: Nissan 350Z, 2004 Rep Power: 0	I guess it's an old bug Nissan's failed to address. I had to get a new driver's side power window motor for my '04.5 Touring Coupe early this year ($161.00). The passenger's side one's acting up, too! So, time to dole out more moolah to Advance Auto parts! Rats! Last edited by j.arnaldo; 11-02-2009 at 01:46 PM.

01-04-2010, 10:29 PM	#14 (permalink)
schrute Track Member Join Date: Aug 2009 Location: utah Posts: 781 Drives: my z every day Rep Power: 17	^Press the start button briefly without holding it down, it will go to "acc" mode. Press it again without holding it down, it will go to "on". Think old school iginition switches and the first two settings before "start". __________________ my journal \| 2009 370z touring \| 6mt \| platinum graphite \| my album second skin \| mr works \| fast intentions \| ssr \| eibach \| hotchkis \| spc \| toyo \| bluebatmobile \| v-led \| jwt \| ventureshield \| tinted tails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Window Tint	rudi	Australia/New Zealand	31	06-11-2018 07:05 PM
HELP window wont roll up	CGMobile370Z	Exterior & Interior	20	02-09-2012 04:30 PM
Window nozzels where?	k20z3	Other Vehicles	3	06-19-2009 12:15 AM
window chip	arcticreaver	Exterior & Interior	11	04-12-2009 09:47 PM
370z auto window	bkunzi01	Nissan 370Z General Discussions	7	03-02-2009 11:32 AM

10-31-2009, 01:34 PM	#2 (permalink)
Matt A True Z Fanatic Join Date: Oct 2009 Location: Augusta, GA Age: 41 Posts: 1,680 Drives: 2010 Avalanche LT Rep Power: 19	When you open and shut your door, is the auto-seal function (made up that term, btw) working? Meaning, is it going up and down about a centimeter as you open and shut the door? If the auto-seal is working when you open, but not when closing the door, that could be your problem. I'd take mine to the dealer if that function was causing problems.

10-31-2009, 01:51 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i read a lot of food and drinks and forgot to read about some problem the op had...

11-01-2009, 09:27 PM	#11 (permalink)
Dallas-Z Base Member Join Date: Aug 2009 Location: San Antonio Posts: 40 Drives: 370z Rep Power: 16	Turn the car to the on position, but not running, hold the windows control to the up position for 7+ seconds, should reset the position for the windows.

11-02-2009, 08:44 PM	#12 (permalink)
dejavu1611 Base Member Join Date: Nov 2009 Location: Houston Posts: 7 Drives: 09 Nissan 370Z PG A7 Rep Power: 16	haha, thanks. I really needed that. I installed my new headunit and it reset all the electronics. My window would go down an inch but did not automatically raise it back up. Was about to send it to the dealership.

01-04-2010, 10:09 PM	#13 (permalink)
dudafunk Enthusiast Member Join Date: Nov 2009 Location: Long Island, NY Posts: 421 Drives: '09 370z Base Red AT Rep Power: 15	same problem. how to reset? ....Turn the car to the on position, but not running??????/??? how?

01-07-2010, 02:06 PM	#15 (permalink)
dudafunk Enthusiast Member Join Date: Nov 2009 Location: Long Island, NY Posts: 421 Drives: '09 370z Base Red AT Rep Power: 15	resolved