$795 for fender, front bumper, side mirrors and partial hood, about 23 inches Seems good compared to other numbers i randomly seen on this site. Thoughts?
|
|
LinkBack | Thread Tools | Display Modes |
04-09-2015, 02:03 PM | #1 (permalink) |
Enthusiast Member
Join Date: Feb 2015
Location: Baltimore
Posts: 379
Drives: 15 PW Nismo 6 SPD
Rep Power: 10 |
My scotchguard clear bra quote
$795 for fender, front bumper, side mirrors and partial hood, about 23 inches
Seems good compared to other numbers i randomly seen on this site. Thoughts? |
04-09-2015, 02:15 PM | #2 (permalink) |
A True Z Fanatic
Join Date: Feb 2012
Location: Huntsville,AL
Posts: 1,724
Drives: '12 370Z PW 6sp
Rep Power: 18 |
Hindsight being 20/20 I would of paid that when I bought mine if I could do it over. Only thing I would change is I would do the whole hood as that line will become more visible over time, more so depending on the color and how it is cared for.
__________________
Tomei|Berk|Takeda|ZSpeed|Fortune Auto|Swift|Eibach|SPL|Carbotech|Motul|Powertrix|Stillen|Aerojacket|Z1|Forgestar|Enkei|Project Kics|Nismo Ti|Llumar
speedfreek's journal |
04-09-2015, 02:29 PM | #4 (permalink) |
A True Z Fanatic
Join Date: Feb 2012
Location: Huntsville,AL
Posts: 1,724
Drives: '12 370Z PW 6sp
Rep Power: 18 |
There is some debate that if done right that dirt/debris cannot get under the edge of the clear bra. From what I have seen this is not always the case and when dirt/debris starts to collect along that edge then the "invisible" line is no longer invisible to the naked eye. I am more picky than that and can see the line even when it is first applied. Just my
__________________
Tomei|Berk|Takeda|ZSpeed|Fortune Auto|Swift|Eibach|SPL|Carbotech|Motul|Powertrix|Stillen|Aerojacket|Z1|Forgestar|Enkei|Project Kics|Nismo Ti|Llumar
speedfreek's journal |
04-09-2015, 02:32 PM | #5 (permalink) |
Elite Member
Join Date: Jun 2012
Location: Calgary
Posts: 13,971
Drives: 14 PW 370Z S/T MT
Rep Power: 243722 |
I did the whole hood for that reason and used Expell not Scotchguard or 3M.
__________________
Member of kenchan's "photoshopped mods" and "proper offsets" gang.
|
04-09-2015, 02:33 PM | #6 (permalink) |
Base Member
Join Date: Sep 2014
Location: Canada
Posts: 72
Drives: 2015 Evo GSR
Rep Power: 11 |
I don't know about white, but mine is brilliant silver and I thought it would be noticeable, but really, unless you are a couple of inches away from the car and looking for it, you won't notice it.
I got the same as you are getting but he used 3M Ventureshield if I remember correctly.
__________________
No more Z |
04-09-2015, 02:37 PM | #7 (permalink) |
The370Z.com Sponsor
|
Sounds like a good price, a full front bumper would be about $350 or so.
The question you gotta ask though, if you do a partial hood, would you be kicking yourself if you got hit with a rock on the part of the hood not protected? You'll say "darn, maybe I should have had the entire hood done." Too late. Plus the line that you won't see at first won't be invisible when you get dust on it. And no, a properly applied PPF won't get stuff under the film but it'll hide along the edge, and you'll see it. Just splurge and get the whole hood, thank us later. You're welcome. Oh, and ask for proof that it's the brand he says it is. He may say it's XPEL or Suntek but he's really giving you 3M Ventureshield. Let him show you the box the film comes in, or some documentation showing what brand it is. I've had that happen in the past with tint saying it was what I was buying but really it was a lower quality tint, he still charged the higher price. All film and tint looks the same, so you should be shown it is what he says it is. -RyanG
__________________
Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!! Last edited by vividracing; 04-09-2015 at 02:40 PM. |
04-09-2015, 02:38 PM | #8 (permalink) | |
The370Z.com Sponsor
|
Quote:
__________________
Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!! |
|
04-09-2015, 04:06 PM | #10 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521 |
partial hood and fender sucks, i speak from experience.
i installed it, and the next day i tore it off because of the visible line. if you're having a shop install it, makes sure they use the rolls, not pre-cut. i mentioned this many times, but precut is for hobbists like me that install them at home. |
04-09-2015, 04:42 PM | #11 (permalink) |
Enthusiast Member
Join Date: Feb 2015
Location: Baltimore
Posts: 379
Drives: 15 PW Nismo 6 SPD
Rep Power: 10 |
Jesus christ i did not expect full hood and fender to be so high. Called a local guy he seemed very good at the job. Laser cut film. Full hood fenders headlights bumper mirror and part of side doors, $1790. Free claybar detail! Lmao
|
04-09-2015, 05:11 PM | #13 (permalink) | |
The370Z.com Sponsor
|
Quote:
And again, find out what product he's using and have him prove it is what he says it is. If he charges you that much, make sure its EXPEL or Suntek. Any 3M product at that price is too much. Also he should cut it himself with a machine or custom cut it, if he buys it pre-cut, it won't protect as much area because they leave a margin for error in installing and the gaps are bigger. If you're paying that much to protect your car, it better cover everything. -RyanG
__________________
Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!! Last edited by vividracing; 04-09-2015 at 05:16 PM. |
|
04-09-2015, 06:29 PM | #14 (permalink) |
Track Member
Join Date: Jul 2009
Location: NE
Age: 39
Posts: 649
Drives: cars
Rep Power: 17 |
You could just have the whole front end repainted cheaper than that. Are people really paying $1500+ for a clear bra?
__________________
Range Rover Sport Supercharged Nissan 370z Touring + Sport |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Paint-chip touch-up and then clear-bra? Or re-spray and then clear-bra? Or neither? | ruxtpin | Detailing / Washing / Waxing / Cosmetic Maintenance and Repair | 14 | 12-23-2013 09:00 PM |
clear bras are sheets of clear laminate film? | elm_tx | Exterior & Interior | 9 | 08-25-2010 09:46 AM |
3M Scotchguard | Rps13.jw | Exterior & Interior | 9 | 07-19-2010 06:54 PM |
370Z Clear-Bra Quote. | Majestik | Australia/New Zealand | 5 | 01-17-2010 01:42 AM |