Nissan 370Z Forum - Nismo Splitter

Nissan 370Z Forum (http://www.the370z.com/)

- Nismo 370Z (http://www.the370z.com/nismo-370z/)

- - Nismo Splitter (http://www.the370z.com/nismo-370z/91247-nismo-splitter.html)

Well not really, it's a Top 1 Motors Flat DC5 Splitter

The splitter with the winglets doesn't fit?

I think it looks good!!

Sent from my iPhone using Tapatalk

Quote:

Originally Posted by Xplicit97 (Post 2864593)

The splitter with the winglets doesn't fit?

The only way I can get those winglets on there, is to drill and screw them on or super super glue them under the Splitter. I can try that if anyone would like to see how it comes out. Other than that, I don't need these winglets lol

I'm assuming this is the type 3 you have on your car?

Quote:

Originally Posted by 95N3RD (Post 2865116)

I'm assuming this is the type 3 you have on your car?

Yes! I don't recommend the first two because the fin will be hitting the bumper a lot, like it rattles.

It's a good deal, $125 Free Shipping

Looks really good! Any more angles with better lighting?

Also did you have to purchase those rods separately?

Quote:

Originally Posted by w4kj4k (Post 2865178)

Looks really good! Any more angles with better lighting?

Also did you have to purchase those rods separately?

I'll take some more today with and without the Winglets.

I did have to buy the Rods, they're 10-10.75in and cost around $80-$95. They're not needed unless you a reckless driver lol or you hit the track.

I have more on my photo album

Looks good, and give you credit for trying something new.

1. Obviously its a bit short from the sides as it looks like you're about a good 1"-2" from the rear of the bumper.

2. Any clearer shots from the front? Did you do anything to fill the area where the Nismo front raises up? From your albums, it appears you pulled the splitter up to bend upward? Doesn't this defeat the actual purpose behind having a splitter? (downforce, pulling the front of the car DOWN. By having the front of the splitter pulled upward, you're actually reversing the purpose and creating upforce/lifting the front)

3. I'm also interested to see where your connection points are for the rods. What is the material of this particular splitter?///found my answer

Very good reasonings for my questions, I assure you ;)

Thank you!

N'm on the material...looked up the site to see they are ABS plastic. Any photos of mounting points underneath?

Quote:

Originally Posted by 1cleanZ (Post 2866499)

Happy to answer your questions

They are short on the sides by 2 inches or less, keep in mind that this splitter isn't intended for a Nismo.

I did my best to do the fitment right, I used 3M double Sided tape to block of a small gap it left. Now the rods are only there for my drive around the city as there is many bumps and driveways where the splitter drags so I tighten it really well and that's why you see it lifted. When I have the rods off or lose, the splitter hold straight for downforce, of course I wouldn't buy this if it weren't for that. It was mostly custom work but we figured to bolt where the straightest part of the splitter was so we don't get that rise as you know the undertray has that effect.