Meisterschaft axle back on Nismo
 

Hello,

I'm looking at an axleback for my nismo.

On GTHAUS website, there are option for regular 370z and Nismo exhaust.

are there any differences other than the tip size of these exhausts? (102 round split vs 130mm round split)

Their website is kinda difficult to navigate through, and it is not very clear if both types will fit directly onto my car.

Also, my nismo tip is 118mm(4.5in).
do you think 130mm(5.1in) might look too big on a nismo?

I'm looking for a sound just like this youtube link below. I'm not sure if this is only axleback on a nismo. Can this owner or someone knowledgeable confirm this for me?

<iframe width="420" height="315" src="//www.youtube.com/embed/5m4ZHWHgwX4" frameborder="0" allowfullscreen></iframe>

Thanks

I had AAM 5" GTR Tips on my Nismo, so yes they will fit. :tiphat:

Meisterschaft axle back on Nismo
 

I just got this exhaust on Friday and installed it. it's the gthaus cat back with there new 130mm option: fits great an looks beautiful! at least to me I got a couple pics of it on jack stands.

there a bit bigger then 5 inch


Sent from my iPhone using Tapatalk

Meisterschaft axle back on Nismo
 

http://img.tapatalk.com/d/14/06/03/quny5u6u.jpghttp://img.tapatalk.com/d/14/06/03/vameny3e.jpg

in this pic it's just the axle back since I installed the y pipes separate from axle back

if u want I can take more pics closer up to the tips tm when I'm installing my short shifter


Sent from my iPhone using Tapatalk

You are the man RB, I've been trying to track down pictures of new 130mm installed on a Nismo!
Even the GTHaus didn't have the pics. I ordered mine yesterday I'm glad I went with 2x130mm. can't wait for mine!

do you think that exhaust tip being pretty big and close to the bumper, that it might risk melting the plastic?

nope u don't have to worry about that at all, I'm at work now (sorry been working alot) but it's adjustable up down left and right when attaching tips to the axle back center muffler. give me a few min an ill go take a break an some pics


Sent from my iPhone using Tapatalk

ok so I snapped a few more, btw u will love this exhaust I think the 130mm looks so good, an obviously sounds great I'm my opinion, I got the motordyne art pipe coupled with my gthaus and it's extremely aggressive sounding/LOUD!!

this can be adjusted any way center, out, up or down
http://img.tapatalk.com/d/14/06/05/2uma5ubu.jpg
under car
http://img.tapatalk.com/d/14/06/05/nu5y2ytu.jpg
the clamp u tighten once u get the tip in the perfect spot
http://img.tapatalk.com/d/14/06/05/ypytyvuz.jpg
http://img.tapatalk.com/d/14/06/05/ejemedy2.jpg

I just installed section 1 an 2 pipe from meisterschaft last night because they shipped out at different times then axle back

and if u were wondering it sound's completely different from when I hade stock nismo y pipe an mid pipe vs the y pipe an mid pipe from meisterschaft. much more defined and different notes in high rev and low rev but I never hooked it up with my cats on just the motordyne art pipe.

and rob over at gthaus was great to deal with.


Sent from my iPhone using Tapatalk

thanks alot for the photos. GTHaus should pay you for these pictures!

one more tip is that the hardware that it comes with aren't the best, I had to remove it to install diff bushings and almost every bolt an nut wouldn't come off almost like the treads were messed up, it would bind up half way off
an they weren't even over tightened an nothing in the threads either.
they literally were so hard to remove that the 304 ss bolt gthaus gives u just snapped. so after snapping every one I went to the store an picked up some nice zink plated solid 8x1.5 1.5" long bolts.
much better.




Sent from my iPhone using Tapatalk

https://m.youtube.com/watch?v=LfpXb1YiLsY

This video is a full meisterschaft cbe with stock cats.

I love that video & the sound. The video was made toward the very end of December and everything on my signature was on the car. I do not have stock cats, I have Fast Intentions Resonated High Flow Cats. I also have the Stillen Gen 3, as well as the M370 Intake Manifold.