Rig Shots of my NISMO

FrancoPhoto

i finally had a chance to setup the rig that i made to get some shots. check em out

__________________
15mm Front spacers~20mm rear spacers~Eibach Springs~Stillen Supercharger~Berk TP~Meisterschaft rear~NISMO mid section

jofro6

great shots man

__________________
2012 Red 6Spd Touring/Nav.. FI CF NonRes CBE and Res TP #682 Fly1 RS1 CF Fenders

GaleForce

Nice shots. Do you mind sharing the materials used in your rig/boom?

__________________

forza370z

Looks really good. 20mm in the back 15mm up front?

__________________
09 PW 370z Nismo | K&N Drop Ins | HKS Hi Power | Berk HFCs | Work Meister S1 3P | Project Kics R40 Neo Chrome Lug Nuts | KW V1 | SPC rear camber arms/toe bolts | Southbend Stage 3 daily clutch | Southband 19Ib Steel Flywheel | ZSpeed CSC

Rangerz

Really nice work

Always wondered how to get the blurred background? Is that done on the camera or in post?

Do tell

__________________
Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY

TerribleONE

Nice!!

__________________

kazman

X2

I have a rig setup as well and my boom has a little flex to it. Yours looks solid. Any info would be greatly appreciated! Pm works to if you want to keep it hush hush.

The pics turned out extremely well. Very nice.

axmea?

Amazing shots.

__________________

Mr&Mrs

I would also like to know the pole used. I have the cups still searching for camera mount.

__________________
Project Z <--Click - Check out the link too many mods to list!

FrancoPhoto

Thank you .

i used 2 manfrotto 241 suction cups and i mounted 2 manfrotto super clamps to them. it was very hard to find the pole for the rig so i ended up purchasing it from rig pro on Facebook for $369. at the end of the pole i added a manfrotto magic arm friction arm with a super clamp on the end of it .
as far as triggering it i used a pair of pocket wizards that connected to the camera via the trigger port ( i forget the name of it ) .
basically drove the car at less than 1mph and wirelessly hit the button on the transmitter.
this was shot at 1 sec F18 with a canon 6D and a 17-40mm F4

__________________
15mm Front spacers~20mm rear spacers~Eibach Springs~Stillen Supercharger~Berk TP~Meisterschaft rear~NISMO mid section

FrancoPhoto

it is done in camera , basically setting your aperture to f18 go capture lots of detail and at the same time setting the shutter speed to 1 sec to get the blurred background

__________________
15mm Front spacers~20mm rear spacers~Eibach Springs~Stillen Supercharger~Berk TP~Meisterschaft rear~NISMO mid section

Mr&Mrs

Thanks for sharing the info. I can't pay that much for a pole though.

__________________
Project Z <--Click - Check out the link too many mods to list!

FrancoPhoto

yes actually , thank you

__________________
15mm Front spacers~20mm rear spacers~Eibach Springs~Stillen Supercharger~Berk TP~Meisterschaft rear~NISMO mid section

MacLean

Awesome pics big guy....very nice.

__________________
l Meisterschaft Full Cat-Back Exhaust l F. I. Resonated High Flow Cats l Stillen Gen 3 l M370 Intake Manifold l UpRev l JWT Clutch & Flywheel l ZSpeed HD CSC l Stillen 19 Row Oil Cooler l ZSpeed Powercoated Under Tray l GTSpec: 6, 4, 2 Point Brace l

FrancoPhoto

i have 4 5ft sections and to be honest i only need 2 sections . wanna buy my other two poles?

__________________
15mm Front spacers~20mm rear spacers~Eibach Springs~Stillen Supercharger~Berk TP~Meisterschaft rear~NISMO mid section