Traction Control Through Third Gear

Armhunter

Is there a way to permanently turn off the stupid thing?

fuct

what are you guys talking about?

for one the factory ADVANs are not a piece of sh1t. they are pretty damn good tires. second, you guys must be driving on some super cold tires or they are bald to be getting the traction light to come on like that.

im going to try today and mash it in every gear and see if i can get the traction light to come on.

and lastly, dont permanently turn your VDC off.you are just asking for trouble.

Armhunter

What kind of trouble? I know how to drive and not saying that like a 18 year old kid who thinks he knows. I sometimes forget to turn it off and when taking a corner at high speeds the thing turns on an ruins my momentum. I agree, the Advans are great tires! Might not be the best but they grip pretty dang good. I have never lost grip at higher gears and see that light turn on unless I am running through the Canyon taking the turns as fast as I can.

You have to remember, Cars never used to have traction control.. So I am curious as to what kind of trouble you are talking about.

SouthArk370Z

Have you checked your brake fluid level? I've seen reports of VDC/ABS/TC problems under high acceleration (plus and minus) if the brake reservoir is not full. Not between the lines, but FULL to the top mark.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

fuct

then pull the fuse to the VDC and party on!

NissanGuy23

Same, i have brand new Hankook V12s, temp was around 75 deg. Dropped it into 3rd, car revved to 4 or 5k rpm and punched it - VDC started blinking and cut power for about a second before it took off. Very annoying. Seems like i gotta turn it off if i ever want to get on it.

If you are hitting a bumpy/uneven patch of road (all over the place in PA), and give any amount of throttle the VDC goes crazy. I actually think its safer to turn it off sometimes because having the power randomly cut out really throws my driving off.

bobburk

I have a set of 18" wheels I use on the track with Nitto NT05 275/35-18 tires on them and if I ever forget to turm off the traction control it kicks on at every corner. The times that I use the stock Yokohoma Advan Sports it almost never does. It seems to be the smaller diameter of the Nittos that throw it off.

As far as the Yokohama tires go I havn't seen a real difference in the grip, in fact both the Yokohama's and the Michelin PSS have a grip rating of AA

__________________
Money can't buy you happiness but it can buy you a race car and that is the next best thing.

tlr3715

The tires I have are only a month old, so it is not that they are wearing down.

It seems like many manufacturers are building stability controls more aggressive than they used to. The stability control hardly ever kicked on in my 350 Z. I remember, also in the 2006 Corvette I had, it would hardly ever engage even under full throttle. With the 2012 Corvette I had it would engage in 1st and 2nd gear even if I didn't hear the tires so much as chirp. I read in the 2012 manual that the TCS would engage "If the system detects wheel slip or anticipates wheel slip." as if it were psychic.

Rusty

Have you ever driven on a 30F day in Jan? Cold tires, cold pavement equal lots of fun.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

DEpointfive0

Actually, yes, I lived in Calgary.
... And you decided that on these freezing days the best thing to do is to be going about 100 and to mash the pedal every gear change?

As many have stated before, you spinning the tires in 5th was either a bump or your brake fluid is low

__________________
Do YOU want to know what/where I got my username from?

Rusty

Did I say anything about doing a 100, mashing the gas pedal at every gear change, spinning the tires in 5th, or my brake fluid is low? No. So quite adding words where they don't belong.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

DEpointfive0

Lol, well, if you're not doing snap gear changes or at too high of a rev into 5th,
You have a SERIOUS problem, and I'm not sure it's just tires, a sensor must be off somewhere or something.

It should be damn near impossible to spin the wheels in 5th, and much less so if you're lazily shifting into 5th at like 45 MPH without mashing the pedal between changes.

Then again, if you're saying its 30 degrees outside, it may not be cold tires, maybe you hit a patch of thin black ice or something similar?

__________________
Do YOU want to know what/where I got my username from?

Rusty

LOL I said under the right conditions. 30F, cold tires, in 5th. Not knowing the road. Take a decreasing radius on ramp at too high of speed. As I shifted into 5th. The turn tighen up. Only doing about 55 mph.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

tlr3715

I'm noticing the VDC light flashing even in 85 degree dry weather on pavement.

If you mash the gas in third gear in my car the light will flash for a good second.

If you switch it off will it still engage if you get in real trouble, or is it completely off?

NickTurnon

An older video of my Z Chirping thru 1st, 2nd, & into 3rd...Don't mind the neutral rev, 7AT, and car rolling backwards haha...



You guys will probably know if its easier to do on a 7AT then it is in the 6spd. But thought a video is more fun.

__________________
2009 Brilliant Silver BASE 7AT | TEIN S-Tech Springs | K&N Drop Ins & z1 Maf Tubes | AAM S-Line Short Tails | 5% Tint | 20MM Spacers | Sport Spoiler NickTurnon's 370z Build