remove spoiler

kensnismo · 08-22-2013, 02:00 PM

I checked DIY section no help how do you remove the upper wing on the rear spoiler? I know you have to remove upper hatch panel what in need to know is if the bolts holding the wing on are over lock tighted and will self destruct when you try removing them. thanks

fuct · 08-22-2013, 02:24 PM

im sure they are on pretty tight but nothing should break.

pfdaxe · 08-23-2013, 10:30 AM

I removed mine to repaint. To remove just the top section (with spoiler off car of course), there are (2) 10mm bolts on each end and (1) in the center post. You need a thin wall socket to get to the center one since the access hole is small. The bolts ARE Loctited on pretty good. Once the bolts are removed, our friends at Nissan also glued the pieces together. I had to use a small blade tool or screwdriver to gently pry and pull like hell to get the top off. I was stressed that it would break. It didn't....whew. Once I noticed and felt it starting to lift, I eased up and it came off. I didn't bother with Loctite when reinstalling. I just fastened with bolts and added a bit of clear silicone where it was glued.

kensnismo · 08-23-2013, 02:20 PM

Thanks

08-22-2013, 02:00 PM	#1 (permalink)
kensnismo Enthusiast Member Join Date: Jan 2011 Location: north tx Posts: 324 Drives: ZL-1 Rep Power: 14	remove spoiler I checked DIY section no help how do you remove the upper wing on the rear spoiler? I know you have to remove upper hatch panel what in need to know is if the bolts holding the wing on are over lock tighted and will self destruct when you try removing them. thanks

08-23-2013, 10:30 AM	#3 (permalink)
pfdaxe A True Z Fanatic Join Date: Aug 2012 Location: Phoenix, AZ Posts: 1,067 Drives: 09 Touring AT Sport Rep Power: 16	I removed mine to repaint. To remove just the top section (with spoiler off car of course), there are (2) 10mm bolts on each end and (1) in the center post. You need a thin wall socket to get to the center one since the access hole is small. The bolts ARE Loctited on pretty good. Once the bolts are removed, our friends at Nissan also glued the pieces together. I had to use a small blade tool or screwdriver to gently pry and pull like hell to get the top off. I was stressed that it would break. It didn't....whew. Once I noticed and felt it starting to lift, I eased up and it came off. I didn't bother with Loctite when reinstalling. I just fastened with bolts and added a bit of clear silicone where it was glued. __________________ Build Thread: http://www.the370z.com/members-370z-...xes-build.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How hard is it to remove front spoiler?	ENT-Z	Exterior & Interior	6	03-27-2012 07:50 PM
Any tips and tricks to remove the stock spoiler?	litesky	Exterior & Interior	4	11-26-2011 06:03 AM
Carid Spoiler crappy fitment replaced original oem spoiler	TPrelude-370z	Exterior & Interior	14	09-10-2011 12:19 PM
How to remove the brake light under the spoiler?	MoChu	Exterior & Interior	15	03-17-2010 07:35 PM

08-22-2013, 02:24 PM	#2 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	im sure they are on pretty tight but nothing should break.

08-23-2013, 02:20 PM	#4 (permalink)
kensnismo Enthusiast Member Join Date: Jan 2011 Location: north tx Posts: 324 Drives: ZL-1 Rep Power: 14	Thanks