Moweraxle for 15/16 Nismo. Great quality

https://farm1.staticflickr.com/759/2...45312fc4_b.jpg

Do anyone else make these plate relocators for the 16 Nismo besides moweraxle.com?

Hate to do this cross threads, but no.

Mower's the only one with the correct length. P-Tuning is either too long (old Nismo) or too short (regular model).

Stillen is only the base model i think, certainly not for 15-16

Thank you!


Sent from my iPhone using Tapatalk

License plate holder
 

Will this not stop Air flow coming into Intake or Rad?

Air flow
 

Any problem with air flow to rad or intakes?

No problems at all

This is how I mounted my front plate on my 14 Nismo grill without punching holes in the bumper. Not the best idea, but not the worst either, and it's cheap, effective, and sturdy, and will prevent you from getting an expensive ticket for no front plate. The plate bracket does not touch the grill because of the foam pipe insulation. White zip-ties used to show contrast in the photos. Easily removed and re-attached later if you enter your car in a car show and want the plate and bracket removed before your car is judged. Saw this idea on U-Tube where a guy mounted a front plate on his VW grill using zip-ties. Hope this helps.

https://scontent.xx.fbcdn.net/hphoto...21725097_o.jpg

https://scontent.xx.fbcdn.net/hphoto...97005454_o.jpg

https://scontent.xx.fbcdn.net/hphoto...00422868_o.jpg

https://scontent.xx.fbcdn.net/hphoto...a4&oe=574AC56B

https://scontent.xx.fbcdn.net/hphoto...b8&oe=57972191

https://scontent.xx.fbcdn.net/hphoto...36&oe=574D1275

https://scontent.xx.fbcdn.net/hphoto...95&oe=57879085

i have a bigass bolt and nuts that screw into the tow receiver if someone wants to take up my failed attempt to diy.

Just completed the install of my MowerAxle.com plate holder kit. Fast delivery, parts were well machined and packaged. The install was quick and easy. Highly recommend this kit!

Post some pictures of the Kit installed!!:tup: