Nismo Clutch

Baer383 · 05-11-2013, 08:56 AM

Quote:

Originally Posted by Armhunter

Ill do this the next time it goes out. I will be ready for it this time. This came out of no where and i didnt want to wait for delivery.

That's when it happens ,out of nowhere ,I got my clutch ***. 2 days after I ordered it.

Gmendez · 05-20-2013, 12:19 PM

Guys, I had the same thing happened to me on Friday (pedal to the floor - no leaking, fluid level was fine). Dealer flushed the DOT3 fluid (OEM) out, filled with fresh DOT 4, bled properly and problem solved. Our cars run very hot and with the fluids absorbing water over time, thus lowering the boiling point, the DOT 3 fluid boils at much lower temps rendering it useless.

Armhunter · 05-20-2013, 12:34 PM

Quote:

Originally Posted by Gmendez

Guys, I had the same thing happened to me on Friday (pedal to the floor - no leaking, fluid level was fine). Dealer flushed the DOT3 fluid (OEM) out, filled with fresh DOT 4, bled properly and problem solved. Our cars run very hot and with the fluids absorbing water over time, thus lowering the boiling point, the DOT 3 fluid boils at much lower temps rendering it useless.

very interesting.

djtodd · 05-20-2013, 01:37 PM

Quote:

Originally Posted by Gmendez

Guys, I had the same thing happened to me on Friday (pedal to the floor - no leaking, fluid level was fine). Dealer flushed the DOT3 fluid (OEM) out, filled with fresh DOT 4, bled properly and problem solved. Our cars run very hot and with the fluids absorbing water over time, thus lowering the boiling point, the DOT 3 fluid boils at much lower temps rendering it useless.

Yep. Bleeding the clutch after track days is always a gruesome sight

Armhunter · 05-20-2013, 04:15 PM

Quote:

Originally Posted by djtodd

Yep. Bleeding the clutch after track days is always a gruesome sight

I have a question then.. If I am running through a canyon, staying in 3rd gear almost the whole drive through.. Speeds anywhere from 45-80, not shifting much at all, not using the clutch much at all, am I still effecting slave/master cylinder? or fluids?

fuct · 05-20-2013, 04:43 PM

Quote:

Originally Posted by Armhunter

I have a question then.. If I am running through a canyon, staying in 3rd gear almost the whole drive through.. Speeds anywhere from 45-80, not shifting much at all, not using the clutch much at all, am I still effecting slave/master cylinder? or fluids?

this is way to vague. what might not be much to one person could be alot to another.

if you are using the clutch and shifting then yes you are using those components and fluid.

i think im a little lost on what your asking though

Gmendez · 05-20-2013, 05:48 PM

Heat transfer is still occurring.

Armhunter · 05-21-2013, 12:03 PM

Quote:

Originally Posted by fuct

this is way to vague. what might not be much to one person could be alot to another.

if you are using the clutch and shifting then yes you are using those components and fluid.

i think im a little lost on what your asking though

They are talking about the fluids getting hot.. well, i asked if I am not actually using the clutch as much as I would on a real track, is it still getting hot...
I honestly dont know what i am talking about.. I am not too educated on cars. I know the basics.

But I dont like driving and all the sudden the sang Slave goes out. I have never had that happen..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Competition Clutch / Spec Clutch / Clutch Master and Flywheels from ERZperformance	ERZperformance	Drivetrain/Engine	60	09-11-2013 02:08 PM
New Nismo - Clutch tips	Pelican170	New 370Z Owner	20	01-04-2012 08:31 PM
Difference between 370z stock clutch and nismo clutch?	wdkwang	Nissan 370Z General Discussions	6	03-26-2011 08:33 AM

05-20-2013, 12:19 PM	#2 (permalink)
Gmendez Base Member Join Date: Mar 2010 Location: Miami, FL Posts: 114 Drives: '10 PW 370Z NISMO Rep Power: 16	Guys, I had the same thing happened to me on Friday (pedal to the floor - no leaking, fluid level was fine). Dealer flushed the DOT3 fluid (OEM) out, filled with fresh DOT 4, bled properly and problem solved. Our cars run very hot and with the fluids absorbing water over time, thus lowering the boiling point, the DOT 3 fluid boils at much lower temps rendering it useless.

05-20-2013, 05:48 PM	#7 (permalink)
Gmendez Base Member Join Date: Mar 2010 Location: Miami, FL Posts: 114 Drives: '10 PW 370Z NISMO Rep Power: 16	Heat transfer is still occurring.