Tien S Tech Lowering Springs & H&R 15mm Spacers

forza370z · 12-31-2012, 09:58 AM

Quote:

Originally Posted by Hotrodz

Thanks Forza370z, your advice is right on with MJB and Fuct. Fuct told me he was running -1.7 and -2.0 w/o a camber kit or toe bolts. He gave the same feedback as you guys before I started down this road. It is pretty reassuring to know that I am getting quality advise from you all.

I'm going to see how the tires wear for now. I live in a small town, so knowing the shop owner has some dividends. He has promised me a free alignment adjustment later if needed. I may go with camber arms and toe bolts at that time. Thanks again and Rep given.

You are welcome buddy. Your car looks nice lowered on those Tein s-tech.

stevent85 · 12-31-2012, 01:52 PM

Did you do 15mm all 4 corners? Im planning on getting swifts soon and your setup looks sweet!

bb370z · 12-31-2012, 02:11 PM

Quote:

Originally Posted by Hotrodz

bb370z, sound like we are heading down similar paths. Even though I have only had the setup for two weeks, my experience is the same. It rides better and even the noise doesn't sound as obnoxious.

Must be the 2010 silver paint

The GMat sound deadening in the back helped a lot! I covered up those vents in the rear of the car with 2 layers of GMat and some foam. That killed a lot of the road wind noise heard from the rear of the car. Doin the doors right now!

Hotrodz · 12-31-2012, 07:27 PM

Quote:

Originally Posted by forza370z

You are welcome buddy. Your car looks nice lowered on those Tein s-tech.

Thanks!

Quote:

Originally Posted by stevent85

Did you do 15mm all 4 corners? Im planning on getting swifts soon and your setup looks sweet!

Yes, 15's on all 4 corners. You can probably go to 20's, but with the Nismo finders you might rub a little if you upsize your tires and drop it 1.5" or more.

Quote:

Originally Posted by bb370z

Must be the 2010 silver paint

The GMat sound deadening in the back helped a lot! I covered up those vents in the rear of the car with 2 layers of GMat and some foam. That killed a lot of the road wind noise heard from the rear of the car. Doin the doors right now!

Sweet, that is also on my to do list, but I need to get an oil cooler installed before the summer, I mean mid spring when temps start to rise. Did you install the GMat yourself and if so, on scale 1 to 10 how hard would the install be for a novice?

bb370z · 12-31-2012, 11:43 PM

Ive Installed deadening in many other Vehicles. It's pretty easy to do, it's just really time consuming and the back of the Z isn't the easiest to get into... Oil cooler is on my list also

Hotrodz · 01-02-2013, 09:43 AM

Quote:

Originally Posted by 1cleans13

I just lowered my car with swifts instead and 15mm spacers (very similar setup). No camber arms or bolts or alignment... I am experiencing a vibration when I hit the brakes at around 80 mph... Are u experiencing this?

Sent from my iPhone using Tapatalk

I took my Nis for a ride yesterday...no problem with vibration at any speeds or during braking! I hope you get your problem figured out. I hate having stuff go wrong with my vehicles.

bb370z · 01-03-2013, 10:19 AM

Quote:

Originally Posted by Hotrodz

I took my Nis for a ride yesterday...no problem with vibration at any speeds or during braking! I hope you get your problem figured out. I hate having stuff go wrong with my vehicles.

No issues with mine either. I did stud replacements front and rear. Sounds like something didnt bolt back on straight...

Hotrodz · 01-03-2013, 11:43 PM

Rodger that...mine are stud replacements as well.

nmjaxx9 · 01-06-2013, 01:53 PM

teins on, 1 word....GREAT

forza370z · 01-06-2013, 03:40 PM

Quote:

Originally Posted by nmjaxx9

teins on, 1 word....GREAT

Sweet!

Now open a new thread and post loads of pix!

Hotrodz · 01-06-2013, 06:00 PM

Quote:

Originally Posted by forza370z

Sweet!

Now open a new thread and post loads of pix!

What he said

nmjaxx9 · 01-07-2013, 12:08 PM

Quote:

Originally Posted by forza370z

Sweet!

Now open a new thread and post loads of pix!

Quote:

Originally Posted by Hotrodz

What he said

Pics up in album!!

pfdaxe · 01-07-2013, 02:52 PM

I'll be installing my TEINS with Eibach sways when I get back from an LA road trip I'm taking at the end of next week. I don't have time to install and get aligned prior.

I also have 20mm front & 25mm rear spacers

fuct · 01-07-2013, 05:27 PM

Quote:

Originally Posted by Hotrodz

Just wanted to post another setup for Nismo fans. I had Tien S Tech and H&R 15mm spacer install on my 2010 Nismo on Dec. 20th. They have settled for nine days and I want to post some pictures for you all.

As far as a review. The springs provide for a better or softer ride than the stock Nismo springs without sacrificing handling in my opinion. In fact I would say its better given the wider and lower stance in combination with the spacers. I am still on stock tires and I really like the look. I have a very steep drive way and I am able to get in and out of it with little scraping.

As far as the drop, its definitely lower than advertised. It's about 1.5" as other have attested too. The wheels will rub all so slightly if you turn them fully, which I seldom do.I also attach my alignment specs for your review. I do not have toe bolts or a camber kit.

I would like to give Fuct props for providing me with information and support in coming to a decision. You the man!

glad i could help, but im curious about the items i highlighted above. the teins are a much higher spring rate. im shocked you find them softer than the factory springs.

and you rub? where? ive never experienced this.

Nick

nmjaxx9 · 01-07-2013, 08:38 PM

Quote:

Originally Posted by pfdaxe

I'll be installing my TEINS with Eibach sways when I get back from an LA road trip I'm taking at the end of next week. I don't have time to install and get aligned prior.

I also have 20mm front & 25mm rear spacers

very niceee should look great.

12-31-2012, 01:52 PM	#17 (permalink)
stevent85 Track Member Join Date: Sep 2012 Location: El Paso, TX Posts: 928 Drives: 2011 370Z NISMO Rep Power: 14	Did you do 15mm all 4 corners? Im planning on getting swifts soon and your setup looks sweet! __________________ Takeda stage 2 CAI, Z1 HFC, GREDDY Turbo TI-C

01-03-2013, 11:43 PM	#23 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Rodger that...mine are stud replacements as well. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-07-2013, 02:52 PM	#28 (permalink)
pfdaxe A True Z Fanatic Join Date: Aug 2012 Location: Phoenix, AZ Posts: 1,067 Drives: 09 Touring AT Sport Rep Power: 16	I'll be installing my TEINS with Eibach sways when I get back from an LA road trip I'm taking at the end of next week. I don't have time to install and get aligned prior. I also have 20mm front & 25mm rear spacers __________________ Build Thread: http://www.the370z.com/members-370z-...xes-build.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo Lowered on Tein S Tech Lowering Springs	johnnydrama	Brakes & Suspension	80	03-04-2012 11:23 AM
[WTB] 15MM Spacers, Lowering Springs	RuB_MyZZteR	Parts for sale (Private Classifieds)	5	03-02-2012 12:31 PM
[FOR SALE] Tein S-Tech Lowering Springs - NEW	TROOPER	Parts for sale (Private Classifieds)	18	08-07-2011 07:57 AM
[FOR SALE] NEW Tein S Tech Lowering Springs	czheng51	Parts for sale (Private Classifieds)	6	07-28-2011 04:13 AM

12-31-2012, 11:43 PM	#20 (permalink)
bb370z Base Member Join Date: May 2012 Location: TN Posts: 145 Drives: 2010 370Z Nismo Rep Power: 13	Ive Installed deadening in many other Vehicles. It's pretty easy to do, it's just really time consuming and the back of the Z isn't the easiest to get into... Oil cooler is on my list also

01-06-2013, 01:53 PM	#24 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	teins on, 1 word....GREAT