NISMO + Tein S Tech + RE11 305 Rear = Anyone?
 

My NISMO is lowered on Tein S Techs. I want to purchase the RE11 but they go from 285 then jump to 305 (rear). I know the 285 will fit (factory) but does any have this setup? Any rubbing?
Also looking at 265 fronts.
Thanks

LINK

http://www.the370z.com/members/fuct-...86-spacers.jpg

thats nismo rims, tein s-techs, 15mm spacers and 305/30 V12's..... no rubbing and room to spare. ;)

:yum:

:tup:

you have 15mm front and rear? How much does it cost to get the longer studs put in?

couldnt tell you, ive done everything myself.

Nice!
What size tire are u runnin up front?
I just ordered H&R Drs 15mm spacers front and rears. Was planning on running 305 in rears like urs and 265 in fronts. You think I will rub?

great answer by fuct!

defintiely have room to spare. Had 325 on 19x12 and fit fine with not much camber. OP you are more than fine ;)

you will be fine. hell 20mm fit with those tires, but you have to run aggressive camber. something i cant afford with my DD.


in the pic above i have the factory 245/40s. but 255/265 fit fine.

Awesome Fuct..! Thanx for the feedback.

How do u like ur Tein S? I was planning on running the mono but price is steep.
Did u notice any difference between ur stock suspension? I research mono do real well for street/track car... Advice and input anyone?

Well T mono's out of the budget so im goin with Swift Spec R's for now until my piggy bank builds back up. Got the spacers in and now waiting for the 265/305 RE11's...

i cant comment on the swifts but people seem happy with them. i like my tein stech springs, and the drop height is spot on where i want it for DDing.

I C... Biggest reason I went with Swift is that I plan on tracking it occasionally. Members on here seem to be happy with them most. Again its a temp solution till I get my Mono's...

How does your front bumper look with it lowered? I want to lower my car too but living in Chicago and the roads we have strongly prohibits me from enjoying a lower ride.

Is the part under the front bumper all scratched up?

Thanks!

Hey torpedo. Just got my 265 fr and 305 rea. Lowered on swift spring spec R. Drop is 1.3 fr and 1.0 rea. I just installed it today. So far no rubbing. It will settle in a few weeks so I hope no issues either. Here's what it looks like. Good luck!

http://dev.crystal-pixel.com/nismo/NismoFB-2-2.jpg

http://dev.crystal-pixel.com/nismo/NismoFB-2.jpg

http://dev.crystal-pixel.com/nismo/NismoFB-400.jpg

http://dev.crystal-pixel.com/nismo/NismoFB-8.jpg