Have $4200 to spend on mods

dmhenderson · 07-17-2012, 03:45 PM

He powder coats, then does the lettering, then does clear coat on top of that. It looks fantastic as long as you stick with black lettering (or so he says). I'm on the wait list for his "swap" calipers so I can get this done. Can't beat his price.

dmhenderson · 07-17-2012, 03:46 PM

Quote:

Originally Posted by fryzia23

Most cbe system will give you similar gains with minimal differences.

Eh - then what's the point of getting rid of the nismo exhaust unless you just want a different exhaust note?

dmhenderson · 07-17-2012, 03:53 PM

Here we go:

Nismo OEM exhaust compared to aftermarket...

So none of the aftermarket exhausts are really going to add much to your performance but they will change the tame exhaust note. Figure I'll eventually swap it out but I'd rather go with bolt-ons that deliver performance first.

fryzia23 · 07-17-2012, 04:34 PM

Any good quality aftermarket exhaust will give you decent gains over stock nismo exhaust. Where do you see in that thread saying it will only change the note not performance?

fryzia23 · 07-17-2012, 04:35 PM

Quote:

Originally Posted by dmhenderson

He powder coats, then does the lettering, then does clear coat on top of that. It looks fantastic as long as you stick with black lettering (or so he says). I'm on the wait list for his "swap" calipers so I can get this done. Can't beat his price.

That sounds pretty good. Ill ask my local powdercoater if he could do anything similar like that

dmhenderson · 07-17-2012, 06:39 PM

Quote:

Originally Posted by fryzia23

Any good quality aftermarket exhaust will give you decent gains over stock nismo exhaust. Where do you see in that thread saying it will only change the note not performance?

Quote:

i am running the nismo and couldn't be happier. The H pipe setup is very efficient and the piping diameter is comparable to aftermarket. I had the FI exhaust prior to this and the gains are similar as well.

So if it's comparable to FI, I'm fine with it.

dmhenderson · 07-17-2012, 06:39 PM

Quote:

Originally Posted by fryzia23

That sounds pretty good. Ill ask my local powdercoater if he could do anything similar like that

Go through Mike if you can. You won't be able to beat his price assuming you don't mind a bit of downtime.

fryzia23 · 07-17-2012, 08:56 PM

I probably would go through Mike but Im powdercoating wheels as well and shipping for those would be pretty expensive so kinda not worth it to save few bucks especially when I have a really good powdercoater around my area here in jersey.

dmhenderson · 07-17-2012, 09:03 PM

Man I'm antsy. I have a call with my agent for the diminished value claim on the car tomorrow so I'll know what my budget is. Either way, the calipers are getting done.

As soon as I have a estimate on the DVC I'm going to order the HFCs and ceramic headers.

fryzia23 · 07-17-2012, 09:44 PM

Let me know how it goes. I need to file a claim myself for DVC.

Which hfc are you gonna go with?

dmhenderson · 07-17-2012, 09:57 PM

Berk.

daisuke149 · 07-17-2012, 10:57 PM

ive seen nismo's with exhausts pull of higher numbers on the dyno. So it def gets gains over the OEM nismo.

also, you should pick an exhaust on the sound alone and looks.. Honestly, how many of you / us are going to really notice.. or even use a variance of 5whp... but you will be listening to the tone the most.. and looking at it also quite a bit.

dmhenderson · 07-18-2012, 08:49 AM

Yep, it's on my list of things to swap out. I like the Stillen exhaust style/tone so I'll probably head down that road sometime early next year.

This stuff drives my girlfriend crazy because every time I do something to the car I say, "Ok I think I'm done messing with the car. There's nothing left to do with it" then 2 months later...

'10Anamoly · 07-18-2012, 09:23 AM

$500 --- Akuma 2.75" Intakes w/Fuel Tune
$550 --- Motordyne ART Test Pipes (new version with O-ring seal)
$1500 -- FI exhaust
$500 --- Uprev Dyno Tune
$290 --- Stillen Brake Ducts
$550 --- Z1 34 Row Cooler w/Lines

You would be around $4500 probably with all of that installed. Should make 310whp+ SAE easy and addresses the major concerns if you track the car (brake overheating, oil overheating).

fryzia23 · 07-18-2012, 11:27 AM

I have cnc hfc for now but they leak so Im gonna try z1 exhaust gaskets so I should eliminate that. I wanna go with ark hfc which supposely eliminate hiss but still there arent enough reviews on that so Im gonna wait little longer.

I never heard FI exhaust in person and I loved the way my ark sounded so Im gonna go back to that one.

I was looking at stillen brake ducts but I dont think they fit nismo. Do they?

07-18-2012, 09:23 AM	#29 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 16	$500 --- Akuma 2.75" Intakes w/Fuel Tune $550 --- Motordyne ART Test Pipes (new version with O-ring seal) $1500 -- FI exhaust $500 --- Uprev Dyno Tune $290 --- Stillen Brake Ducts $550 --- Z1 34 Row Cooler w/Lines You would be around $4500 probably with all of that installed. Should make 310whp+ SAE easy and addresses the major concerns if you track the car (brake overheating, oil overheating). __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z For Sale 2010 Platinum Graphite 4200 miles	zlwatts	370Z For Sale	16	01-10-2013 08:47 PM
How to spend $3k in mods?	gomer_110	Engine & Drivetrain	10	01-05-2012 07:51 PM
I've got $8,000 to spend on mods for my 370z. Need some advice.	pm87	Nissan 370Z General Discussions	44	09-13-2011 01:53 AM
WTB 25,000 to spend	afgiussppe	Cars for sale (Private Classifieds)	0	07-05-2011 12:50 AM
500 to spend, what to get?	akgambler47	Nissan 370Z General Discussions	10	06-24-2010 12:29 AM

07-17-2012, 03:45 PM	#16 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	He powder coats, then does the lettering, then does clear coat on top of that. It looks fantastic as long as you stick with black lettering (or so he says). I'm on the wait list for his "swap" calipers so I can get this done. Can't beat his price.

07-17-2012, 03:53 PM	#18 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Here we go: Nismo OEM exhaust compared to aftermarket... So none of the aftermarket exhausts are really going to add much to your performance but they will change the tame exhaust note. Figure I'll eventually swap it out but I'd rather go with bolt-ons that deliver performance first.

07-17-2012, 04:34 PM	#19 (permalink)
fryzia23 Enthusiast Member Join Date: Dec 2010 Location: new jersey Posts: 452 Drives: 2011 MB 370Z NISMO Rep Power: 1246	Any good quality aftermarket exhaust will give you decent gains over stock nismo exhaust. Where do you see in that thread saying it will only change the note not performance?

07-17-2012, 08:56 PM	#23 (permalink)
fryzia23 Enthusiast Member Join Date: Dec 2010 Location: new jersey Posts: 452 Drives: 2011 MB 370Z NISMO Rep Power: 1246	I probably would go through Mike but Im powdercoating wheels as well and shipping for those would be pretty expensive so kinda not worth it to save few bucks especially when I have a really good powdercoater around my area here in jersey.

07-17-2012, 09:03 PM	#24 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Man I'm antsy. I have a call with my agent for the diminished value claim on the car tomorrow so I'll know what my budget is. Either way, the calipers are getting done. As soon as I have a estimate on the DVC I'm going to order the HFCs and ceramic headers.

07-17-2012, 09:44 PM	#25 (permalink)
fryzia23 Enthusiast Member Join Date: Dec 2010 Location: new jersey Posts: 452 Drives: 2011 MB 370Z NISMO Rep Power: 1246	Let me know how it goes. I need to file a claim myself for DVC. Which hfc are you gonna go with?

07-17-2012, 09:57 PM	#26 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Berk.

07-17-2012, 10:57 PM	#27 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 32	ive seen nismo's with exhausts pull of higher numbers on the dyno. So it def gets gains over the OEM nismo. also, you should pick an exhaust on the sound alone and looks.. Honestly, how many of you / us are going to really notice.. or even use a variance of 5whp... but you will be listening to the tone the most.. and looking at it also quite a bit.

07-18-2012, 08:49 AM	#28 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Yep, it's on my list of things to swap out. I like the Stillen exhaust style/tone so I'll probably head down that road sometime early next year. This stuff drives my girlfriend crazy because every time I do something to the car I say, "Ok I think I'm done messing with the car. There's nothing left to do with it" then 2 months later...

07-18-2012, 11:27 AM	#30 (permalink)
fryzia23 Enthusiast Member Join Date: Dec 2010 Location: new jersey Posts: 452 Drives: 2011 MB 370Z NISMO Rep Power: 1246	I have cnc hfc for now but they leak so Im gonna try z1 exhaust gaskets so I should eliminate that. I wanna go with ark hfc which supposely eliminate hiss but still there arent enough reviews on that so Im gonna wait little longer. I never heard FI exhaust in person and I loved the way my ark sounded so Im gonna go back to that one. I was looking at stillen brake ducts but I dont think they fit nismo. Do they?