Missing under piece to bumper/front lip?

Joe@ZSpeed · 03-19-2012, 11:06 PM

Production pieces are in process of being made for the Nismo as of today !

The regular 370Z V2 and G37 V2 are in process also, Deeper, fits with Hotchkis sways and oil pan spacers.

takjak2 · 03-19-2012, 11:44 PM

fuct · 03-23-2012, 04:47 PM

how do they look?

tjlazer · 03-23-2012, 05:05 PM

Quote:

Originally Posted by fuct

how do they look?

see post #24

fuct · 03-24-2012, 09:26 AM

Quote:

Originally Posted by tjlazer

see post #24

the final version.... dur

sixpax · 03-24-2012, 02:10 PM

Quote:

Originally Posted by fuct

the final version.... dur

looks like you are fuct until someone posts a picture of the final version ...

Joe@ZSpeed · 03-24-2012, 09:38 PM

Here are a few pictures of the final version of the 2009-2012 Nismo 370Z under pan, There will be one change on the back side bottom which will increase the rigidity and also allow the use of oil pan spacers and deeper oil pans.

The outside fender pieces are mounted on the wrong side of the middle part in these pictures but will give you a good idea what they will look like.

I will get some pics of production pieces in the next few days and also get them on the website with pricing which is going to be in the $400 range.

We are also working on integrated brake ducting which is in the works right now.

Should have final pieces ready to ship in the next 3-4 days if all goes well.

Picture below shows air duct to bring in cool air which will flow air across the oil pan and suction hot air out of the engine compartment and out the back of the shield for cooler under hood temps.

Outside fender liner pieces get mounted on top of the center section instead of below as pictured here.

Rusty · 03-25-2012, 07:54 AM

Nice. I'm interested in one with the brake ducts. Also, I have the AAM oil pan spacer. When I installed that. I had to cut off the one mounting boss on the frame for clearance. How you going about that issue?

Joe@ZSpeed · 03-25-2012, 09:39 AM

Quote:

Originally Posted by Rusty

Nice. I'm interested in one with the brake ducts. Also, I have the AAM oil pan spacer. When I installed that. I had to cut off the one mounting boss on the frame for clearance. How you going about that issue?

I have never cut one off, I always just bend them out of the way then back after the spacer is installed.

I guess you could have a mount tacked back on so you can use all the mounting points.

sixpax · 03-25-2012, 09:42 AM

Quote:

Originally Posted by Joe@ZSpeed

Here are a few pictures of the final version of the 2009-2012 Nismo 370Z under pan, There will be one change on the back side bottom which will increase the rigidity and also allow the use of oil pan spacers and deeper oil pans.

The outside fender pieces are mounted on the wrong side of the middle part in these pictures but will give you a good idea what they will look like.

I will get some pics of production pieces in the next few days and also get them on the website with pricing which is going to be in the $400 range.

We are also working on integrated brake ducting which is in the works right now.

Should have final pieces ready to ship in the next 3-4 days if all goes well.

Picture below shows air duct to bring in cool air which will flow air across the oil pan and suction hot air out of the engine compartment and out the back of the shield for cooler under hood temps.

Look's awesome ! Thanks for sharing the recent pics. I am curious to see how the brake ducting is integrated.

Joe@ZSpeed · 03-25-2012, 10:19 AM

Quote:

Originally Posted by sixpax

Look's awesome ! Thanks for sharing the recent pics. I am curious to see how the brake ducting is integrated.

I should add that the brake ducts will be an add-on for the shield, Not sure how long it will be before we do them.

quicksilverCC · 03-26-2012, 10:06 AM

Nice!

Nismo63 · 03-26-2012, 10:19 AM

I had a problem with that part this weekend after I took the Z in for an Oil Change. The next day I was driving home from the store and heard this noise from under the car. I got out and it was hanging loose and hitting the ground. I got under the car and took it off before it came off on its own. Don't know if its worth putting back on or not? LOL

Nismo63 · 03-26-2012, 10:21 AM

Quote:

Originally Posted by Rooskey

According to the diagram has anyone lost part 75895 while driving at high speeds? Mine flew off and took out one of my 02 sensors a few months back. I was running about 140mph when I heard a loud noise from underneath. I never heard of this before on the forums so im hoping this was a rare occasion.

I had a problem with that part this weekend after I took the Z in for an Oil Change. The next day I was driving home from the store and heard this noise from under the car. I got out and it was hanging loose and hitting the ground. I got under the car and took it off before it came off on its own. Don't know if its worth putting back on or not? LOL

sixpax · 03-26-2012, 08:03 PM

Quote:

Originally Posted by Joe@ZSpeed

I should add that the brake ducts will be an add-on for the shield and it will be some time before these kits would be ready.

...I figured as much.

03-19-2012, 11:06 PM	#46 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 342999	Production pieces are in process of being made for the Nismo as of today ! The regular 370Z V2 and G37 V2 are in process also, Deeper, fits with Hotchkis sways and oil pan spacers. __________________ http://photos.zspeedperformance.com/...ardsize=468x60 Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

03-19-2012, 11:44 PM	#47 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	__________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

03-24-2012, 09:38 PM	#52 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 342999	Here are a few pictures of the final version of the 2009-2012 Nismo 370Z under pan, There will be one change on the back side bottom which will increase the rigidity and also allow the use of oil pan spacers and deeper oil pans. The outside fender pieces are mounted on the wrong side of the middle part in these pictures but will give you a good idea what they will look like. I will get some pics of production pieces in the next few days and also get them on the website with pricing which is going to be in the $400 range. We are also working on integrated brake ducting which is in the works right now. Should have final pieces ready to ship in the next 3-4 days if all goes well. Picture below shows air duct to bring in cool air which will flow air across the oil pan and suction hot air out of the engine compartment and out the back of the shield for cooler under hood temps. Outside fender liner pieces get mounted on top of the center section instead of below as pictured here. __________________ http://photos.zspeedperformance.com/...ardsize=468x60 Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

03-25-2012, 07:54 AM	#53 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Nice. I'm interested in one with the brake ducts. Also, I have the AAM oil pan spacer. When I installed that. I had to cut off the one mounting boss on the frame for clearance. How you going about that issue? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-26-2012, 10:19 AM	#58 (permalink)
Nismo63 Base Member Join Date: Sep 2011 Location: Fort Lauderdale, FL Posts: 65 Drives: 2010 370Z Nismo # 63 Rep Power: 14	I had a problem with that part this weekend after I took the Z in for an Oil Change. The next day I was driving home from the store and heard this noise from under the car. I got out and it was hanging loose and hitting the ground. I got under the car and took it off before it came off on its own. Don't know if its worth putting back on or not? LOL __________________ 2010 - 370Z Nismo #0063 - Injen CAI, Ark Grip True Dual Exhaust, H&R Sports Springs, Sony 770BT - Rockford Fosgate Sub & Amp. - Nismo Shift Knob - LED bulb upgrade - 370Z Nismo owners? Come Visit my pages http://www.facebook.com/groups/232194736829502/ https://www.facebook.com/pages/Proje...7010574?ref=hl

03-23-2012, 04:47 PM	#48 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	how do they look?

03-26-2012, 10:06 AM	#57 (permalink)
quicksilverCC Base Member Join Date: Nov 2011 Location: Pennsylvania Posts: 42 Drives: 370Z Nismo Rep Power: 14	Nice!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need help with missing/broken body piece	Pharmacist	Exterior & Interior	14	10-30-2011 10:51 AM
[FOR SALE] Evo-R CF Diffuser & Front Upper Bumper Piece	AllForTheCash	Parts for sale (Private Classifieds)	11	05-24-2011 04:59 PM
Anyone ever get stopped for missing front plate?	darrinps	Nissan 370Z General Discussions	48	07-01-2010 04:02 PM
Missing front spoiler	Lemers	Exterior & Interior	13	04-02-2010 12:26 AM