Missing under piece to bumper/front lip?

DCNISMO · 02-06-2012, 08:05 AM

Why not use some kind of angled duct on the part of the plate that is recessed a bit in front of the wheel and direct some air towards the brakes? That would be easy to make as an add-on.

whoLEEoh · 02-06-2012, 10:46 AM

Joe please make sure it clears the hotchkis bar. It looks fantastic.

Joe@ZSpeed · 02-06-2012, 02:53 PM

Should be plenty of room for the sways and lower oil pans

Look at all the room for brake ducts!

Really not sure how the regular version is not clearing, This only sits about a 1/2" lower, we will be making a version 2 of the normal 370Z Underpan that sits a little lower also. We will be offering both versions for the non-nismo 370 in the future.

fuct · 02-07-2012, 08:40 AM

what about the long rectangular plastic cover that spans that gap needed to hide the three mounting bolts? will not having it cause turbulence under there?

hazzazi · 02-07-2012, 09:43 AM

Quote:

Originally Posted by fuct

what about the long rectangular plastic cover that spans that gap needed to hide the three mounting bolts? will not having it cause turbulence under there?

+1 same question here...

Joe@ZSpeed · 02-07-2012, 09:56 AM

Quote:

Originally Posted by fuct

what about the long rectangular plastic cover that spans that gap needed to hide the three mounting bolts? will not having it cause turbulence under there?

If you look under the car you will see that that is up higher than the lower lip of the bumper, we do not believe it will cause any turbulence. We are adding vents on the rear side of the cut out to draw air in and across the bottom of the engine and oil pan and out the rear of the shield for better cooling in that area.

fuct · 02-07-2012, 11:01 AM

exciting!!!!! remake as many of those pieces as you can.

chops · 02-08-2012, 03:35 PM

Quote:

Originally Posted by Joe@ZSpeed

Should be plenty of room for the sways and lower oil pans

Look at all the room for brake ducts!

Really not sure how the regular version is not clearing, This only sits about a 1/2" lower, we will be making a version 2 of the normal 370Z Underpan that sits a little lower also. We will be offering both versions for the non-nismo 370 in the future.

no love for a cutout for easier oil changes? also...please tell me this will be reasonably priced! we already got raped buying nismos...we dont need to get raped on this underpiece as well just because its a nismo piece!

fuct · 02-16-2012, 03:43 PM

hows this coming?

Joe@ZSpeed · 02-16-2012, 08:19 PM

I'm doing what I can guys, Will take a little time with everything else going on, Should not be too much longer.

Bryan · 03-01-2012, 01:20 PM

Any new info guys?

Joe@ZSpeed · 03-01-2012, 08:41 PM

Test fitted the last re-vamped piece, Still needs a few adjustments before I am satisfied.

Sorry, I am kind of picky and want things perfect

theDreamer · 03-01-2012, 08:46 PM

Quote:

Originally Posted by Joe@ZSpeed

Test fitted the last re-vamped piece, Still needs a few adjustments before I am satisfied.

Sorry, I am kind of picky and want things perfect

Good to know, just keep us updated.
Looking to order a Nismo front bumper soon and this piece is of course needed.

Also, any estimate on pricing yet?

fuct · 03-02-2012, 09:49 AM

tick tock...

Sharpie711 · 03-19-2012, 09:22 PM

I was cruising around 110 mph today and lost a plastic piece from my under carriage and i think this was it...I heard it flapping around and as soon as i started to slow down i saw it flying in the wind in my rear view...

02-06-2012, 10:46 AM	#32 (permalink)
whoLEEoh Premium Member Join Date: Oct 2010 Location: Miami,FL Posts: 647 Drives: 2010 370z NISMO Rep Power: 15	Joe please make sure it clears the hotchkis bar. It looks fantastic. __________________ 2013 Boss 302

02-06-2012, 02:53 PM	#33 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 342999	Should be plenty of room for the sways and lower oil pans Look at all the room for brake ducts! Really not sure how the regular version is not clearing, This only sits about a 1/2" lower, we will be making a version 2 of the normal 370Z Underpan that sits a little lower also. We will be offering both versions for the non-nismo 370 in the future. __________________ http://photos.zspeedperformance.com/...ardsize=468x60 Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

02-16-2012, 08:19 PM	#40 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 342999	I'm doing what I can guys, Will take a little time with everything else going on, Should not be too much longer. __________________ http://photos.zspeedperformance.com/...ardsize=468x60 Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

03-01-2012, 08:41 PM	#42 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 342999	Test fitted the last re-vamped piece, Still needs a few adjustments before I am satisfied. Sorry, I am kind of picky and want things perfect __________________ http://photos.zspeedperformance.com/...ardsize=468x60 Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need help with missing/broken body piece	Pharmacist	Exterior & Interior	14	10-30-2011 09:51 AM
[FOR SALE] Evo-R CF Diffuser & Front Upper Bumper Piece	AllForTheCash	Parts for sale (Private Classifieds)	11	05-24-2011 03:59 PM
Anyone ever get stopped for missing front plate?	darrinps	Nissan 370Z General Discussions	48	07-01-2010 03:02 PM
Missing front spoiler	Lemers	Exterior & Interior	13	04-01-2010 11:26 PM

02-06-2012, 08:05 AM	#31 (permalink)
DCNISMO Track Member Join Date: Nov 2011 Location: washington dc Posts: 995 Drives: Nismo Z Rep Power: 178	Why not use some kind of angled duct on the part of the plate that is recessed a bit in front of the wheel and direct some air towards the brakes? That would be easy to make as an add-on.

02-07-2012, 08:40 AM	#34 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	what about the long rectangular plastic cover that spans that gap needed to hide the three mounting bolts? will not having it cause turbulence under there?

02-07-2012, 11:01 AM	#37 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	exciting!!!!! remake as many of those pieces as you can.

02-16-2012, 03:43 PM	#39 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	hows this coming?

03-01-2012, 01:20 PM	#41 (permalink)
Bryan Base Member Join Date: Jul 2010 Location: Houston Posts: 72 Drives: 13' STI Rep Power: 15	Any new info guys?

03-02-2012, 09:49 AM	#44 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	tick tock...

03-19-2012, 09:22 PM	#45 (permalink)
Sharpie711 Base Member Join Date: Mar 2012 Location: Georgia Posts: 54 Drives: 09 370z (Nismo) Rep Power: 13	I was cruising around 110 mph today and lost a plastic piece from my under carriage and i think this was it...I heard it flapping around and as soon as i started to slow down i saw it flying in the wind in my rear view...