Front license plate mount bracket options?

ZNismoZ · 06-11-2012, 07:53 PM

On the fence deciding between GoMiniGo offset and Maoweraxle bracket. Are both adjustable in height and laterality from side to side?

eterneSoul · 07-08-2012, 02:03 PM

Quote:

Originally Posted by ZNismoZ

On the fence deciding between GoMiniGo offset and Maoweraxle bracket. Are both adjustable in height and laterality from side to side?

I have the GoMiniGo one and absolutely love it. I was worried at first it wouldn't come with enough pieces to be long enough. I ended up with 5 extra washers and even more nuts/bolts.

It's only adjustable from side to side if you get the offset bracket. You can flip it 180 degrees and get two options out of it. There are 3 height levels. However, I've considered using the plate holes as added options to adjustment in height (this would give it 5 height levels).

dmhenderson · 07-08-2012, 10:42 PM

Quote:

Originally Posted by ZNismoZ

On the fence deciding between GoMiniGo offset and Maoweraxle bracket. Are both adjustable in height and laterality from side to side?

The moweraxle mount cannot be adjusted (without modification) in any direction. It has a large steel bolt that screws into your towhook that then screws directly into the bracket.

OptionZero · 12-29-2015, 10:12 PM

Sorry to bump a dead thread.

I have a 2015 Nismo; is there any reason the P-Tuning Nismo version (listed as 09-12) wouldn't work?

BrockDM1 · 12-30-2015, 11:01 AM

Quote:

Originally Posted by dmhenderson

The moweraxle mount cannot be adjusted (without modification) in any direction. It has a large steel bolt that screws into your towhook that then screws directly into the bracket.

False. The moweraxle mounts to the car but has 6 or 8 holes on the plate itself that allows you to choose the positioning you want it to be at. There are 2 different heights and 4 options left and right

BrockDM1 · 12-30-2015, 11:03 AM

Quote:

Originally Posted by OptionZero

Sorry to bump a dead thread.

I have a 2015 Nismo; is there any reason the P-Tuning Nismo version (listed as 09-12) wouldn't work?

I believe the length of the rod is shorter on the older Nismo's. Your best bet is to get the mount designed for the 15

OptionZero · 12-30-2015, 04:34 PM

PTuning sent me this measurement (pic below) for their 09-12 Nismo kit. Looks like about 8 inchs after the threaded portion.

I'll take a measurement when i get home today on the Nismo clearance.

I thought Nismo variants had to be longer due to the longer nose. Moweraxle has a longer one for the '09-14 Nismo than for a base, but one thats an inch shorter (than '09-14 Nismo)for their '15-16 Nismo.

dmatt · 12-31-2015, 12:41 PM

Yes rod for the '15 will work fine.

OptionZero · 12-31-2015, 01:54 PM

Srry for the delay.

Took tape measure, got about 7 inches from toe hook mount to nose of car. To me 8 inches would stick out too much.

I called Ptuning and they said they don't have a mounting rod thats 7 inches with the right thread pitch.

I am going with the Mower Axle one specifically for 15-16 Nismo, since we know it works.

Ptuning did say they'll work on a 2015-16 one when they can get ahold of a test far to sample on. They were pretty helpful overall despite not having a solution that worked for what i wanted.

OptionZero · 01-10-2016, 11:25 PM

I received my Mower Axle kit for the 2015-16 bumper. Super easy install, Larry got it shipped out quick as well. 2 day shipping!

GordoNx3o9 · 02-15-2016, 01:10 PM

Quote:

Originally Posted by OptionZero

I received my Mower Axle kit for the 2015-16 bumper. Super easy install, Larry got it shipped out quick as well. 2 day shipping!

Is this at its highest level? Can it be mounted higher?

OptionZero · 02-15-2016, 03:22 PM

No, thats the lowest row of holes. If you use a higher position it'll be maybe an inch higher.

12-31-2015, 12:41 PM	#38 (permalink)
dmatt Base Member Join Date: May 2011 Location: Hurricane, UT Posts: 217 Drives: 2016 370Z Nismo Tech Rep Power: 14	Yes rod for the '15 will work fine. __________________ CURRENT - 2016 NISMO TECH \| PEARL WHITE \| MOWERAXLE \| GTR START \| K & N \| PAST - 2011 NISMO \| KW V3'S \| HOTCHKIS \| SPL \| AKRAPOVIC EVO CF \| VERTINI 19x9.5 & 19x11 \| HANKOOK V12'S 255/35 & 305/30 \| MOWERAXLE \|

02-15-2016, 03:22 PM	#42 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,225 Drives: 15 370Z Nismo 6MT Rep Power: 214100	No, thats the lowest row of holes. If you use a higher position it'll be maybe an inch higher. GordoNx3o9 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front license plate mount bracket options?	dmhenderson	Exterior & Interior	4	01-06-2012 01:17 AM
[WTB] OEM Front License Plate Bracket	TruKoi	Parts for sale (Private Classifieds)	3	06-21-2011 11:52 AM
ISO front license plate bracket	Somberlaine	Wanted	3	06-05-2011 10:35 PM
WTB Front License Plate bracket	cjr02	Parts for sale (Private Classifieds)	7	04-11-2011 06:37 PM
Looking for OEM Front license plate bracket	KptKIDLAT	Parts for sale (Private Classifieds)	10	06-17-2010 09:49 AM

06-11-2012, 07:53 PM	#31 (permalink)
ZNismoZ Base Member Join Date: Jan 2012 Location: Los Angeles Posts: 17 Drives: 12 Nissan 370Z GM M6 Rep Power: 13	On the fence deciding between GoMiniGo offset and Maoweraxle bracket. Are both adjustable in height and laterality from side to side?

12-29-2015, 10:12 PM	#34 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,225 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Sorry to bump a dead thread. I have a 2015 Nismo; is there any reason the P-Tuning Nismo version (listed as 09-12) wouldn't work?