![]() |
do nismo models have oil coolers?
like the title says. just wondering if they do or don't.I'm going to be driving to vegas on monday from lbc. i just want a heads up. I'm super new to the z world. just read about no oil coolers on the regular models. thanks for the help guys.
|
Nope. Not unless you install one...
|
ahh. ok time to go shopping.
|
Let us know if we can help.. have 2 levels of proven oil coolers in a bolt-on configuration, and some current specials to help with the price..
Good call on a cooler.. unfortunately these cars need it.. |
where are u guys located? do u do installs as well? what two models to choose from? please hit me up ASAP. i would like this done before june. thanks.
|
|
Quote:
We have two versions of the STILLEN Oil Cooler Street Version - 19 Row SETRAB Core http://www.stillen.com/product_images/400637.jpg Race Version - 25 Row SETRAB Core http://www.stillen.com/product_images/400638.jpg Street Version is good for all street use, and light track use.. Race version is an overkill setup for the street, but works fine with the thermostatic bypass, and will handle track use without a worry. We do have a full installation facility, handle anything from simple installations like oil coolers, all the way up to superchargers and even full track builds. |
nice. ill be seeing u guys in about 2 weeks to get one installed. thanks just found me a shop.
|
Anyone know of a good performance shop in Dallas area that installs after-market oil coolers? Reco brand/model for Dallas? Thanks
|
Quote:
If you want to overpay, Jotech, and you can try Screamin Lizards Customs, talk to Philip Martinez, and tell him Andrew Astani from the DFW page sent you |
Thanks. How do I get to the TX section? Scrolling through and don't see anything.
|
2012 and 2013 NISMO models have factory-installed oil coolers
|
Quote:
|
so the "after 2012" models dont have coolers? i thought ALL z models had it after 12.
|
Quote:
Unless you are tracking the hell out of it, they should be fine. Many folks install air-cooled oil coolers, but they tend to over cool in the winter if you live in colder regions, and so folks end up getting block-off plates to restrict the cooling. IMO, unless you routinely see oil temps over 230*, you don't need to worry about it, and even then I'd just make a point to monitor temps more judiciously before running out an installing a cooler. Ideally you want the oil between about 180* and 200* for optimum lubrication and power. Much lower is not ideal and much higher is not either, although most modern synthetic oils perform just fine on the hot side, with negligible shearing, provided you are not creeping into the 300*'s and racing the engine (impossible on this car, as it will go into limp mode over 260* or so). Undercooled oil (say, below 160*) is worse than a bit hot if racing the engine as far as lubrication goes, although modern synthetic oils are also better engineered to work well cold too. Overall, I wouldn't race the engine until in the 160*+ temp. My 2 cents on this are informed by professional engine builders and by data from engine building and tuning texts on the subject that I've consulted over the years, but someone more versed in oils and machine lubes may have a different view on this. |
All times are GMT -5. The time now is 12:24 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2