370z Nismo Daily Pics and Fresh Pics

NissanGuy23

Fixed splitter, installed my Pioneer, washed for first time since fall and went for a drive

NismoNox

Installed Winglets

Attached Images

image.jpg (114.3 KB, 107 views)

Adalvar

Like the color on the head lamps.

NismoNox

There's a guy in Alhambra, Ca that can do it for you, he did black housing, red shrouds, carbon fiber reflector, STI-R clear lens and Halos.

Adalvar

Perfect I needed some one local. Thanks.

NismoNox

Anyone need headlight work done in SoCal?

Facebook is the best way to contact him, he only does about 2-3 cars a week so set up an appointment soon

Adalvar

Very nice thanks man. I will contact him. Did he remove the lights from the car, or did you have to remove them yourself?

Crayon

This. I need a guide for this. I noticed the little tiny chunk of plastic that holds the stock bolt is super crappy (and broken on both sides of mine). Any tips?

__________________

NissanGuy23

Here is how i did it, bought a bracket at home depot and slotted the hole out. Ended up dremeling off these overly long bolts. If you go this route drill your holes slightly overly 'high' so you never have a gap around the edge. If its a bit too high you can always make up easily with a spacer or washer, ext, but if its too low you end up with a gap again. Used lock washers a lock nut. I also had an issue where the plastic recess/contersink had broken off, and i reattached with a ton of 'goop' glue which can only be seen from inside the bumper. A 3rd issue is there are 3 pop rivets like 3 feet under the front of the splitter which attach into metal, they were missing for some reason, as were the pop rivets where my wheel wheel meets the splitter, not sure how these ended up missing but it fixed my sagging splitter and flapping at high speed.