Homemade Ramps
 

Easy to do took 45min to cut and build. Cost $50 bucks wood, glue and screws. They are heavy but I'm keeping them nearby so I don't have to move em too far. I may even paint them. 4 pieces of wood 2x10's, base 78" next 60" next 42" and top 24" plenty of wiggle room for chocks or just plenty of room knowing your on the top. I have used rhino ramps and they are relatively cheap but will not work with our nismos. Even building an extension onto the rhino ramps won't work, they touch. So I figured why not with a couple more pieces of wood. The great thing about these that no other ramp that you can purchase can offer is the STEPS. You don't need someone to spot you or use a mirror and try to work all that to figure out your on the top or guessing how much more... You feel step 1,2,3 and you know you're on the top. Really cool. :pics: Ramp issue solved.

A little too big so I shortened it, not as big or heavy but still kinda heavy. Started base board 60&1/2inches then subtracted 14 inches to every board. Not bad...:stirthepot:

Pics or ban

Pics or GTFO

k, for some reason I can't upload pics from my cell. :confused:

Sorry guys I can't post a pic. I'll try with a different camera. Painted them black. :happydance:

ok ban in 3-2-1.... lool


pis with dimentions would be great.

ok, what am i doing wrong here? I can't get the photos off my camera either. :wtf2:

operator input error.



solution:


replace operator

Hold the pictures up to the monitor and let the forum absorb them. :icon17:

:bowrofl::roflpuke2::bowrofl:

How long do I have to hold it? How long will the absorbtion process take? :icon23:

:icon18: Operator made in China?