Race Ramps

Fred@ReverseLogic · 11-26-2010, 02:27 PM

I just lowered all of the Race Ramps prices yesterday. Those prices are good until the manufacturer publishes a new price list (possibly in February). The Flatstoppers are $20 off my regular price through 17-Dec-2010.

Quote:

Originally Posted by SoCal 370Z

Buyer's remorse? Zero, nada, zip as I've never owned a finer ramp. Also, how do you get a floor creeper around the side of the wooden ramps?

Fred, any Black Friday specials your way?

Nismoracer · 11-26-2010, 05:18 PM

Just looked at prices of the race ramps + extenders $208 + $119 + S&H = $327 + S&H I think it comes out to almost 400 bucks. Gonna try the build my own extenders cuz I already have the rhino ramps. I don't see the hole though where that guy put the bolt through. Or dig a ditch in my yard lol.

chops · 11-26-2010, 05:47 PM

Quote:

Originally Posted by Fred@ReverseLogic

Wooden ramps may be cost effective if 3-inches high is all you need. But if you want a 10" high ramp that you can safely work under with a 2-piece design that is easy to transport and store, you won't find a better alternative than Race Ramps.

If you build a 10" high ramp out of 2 x 10s you are likely to break your back trying to lift it and there is no way you are going to transport it in your car.

haha thats very true..although they wont ever leave my garage so im perfectly fine with that!

Fred@ReverseLogic · 11-26-2010, 06:30 PM

Our price for the one piece RR-56 ramps plus Xtenders is $187 + $107 = $294 including S&H. If you can wait a couple of weeks, the RR-65-2 2-piece 2-stage incline Race Ramps with the integrated XTenders will be about the same price. Price TBD, but, I expect the street price to be no more than $300 including shipping.

See the drawings at this link or on my website.

Drawings for 2-piece, 2-stage incline Race Ramps

Quote:

Originally Posted by Nismoracer

Just looked at prices of the race ramps + extenders $208 + $119 + S&H = $327 + S&H I think it comes out to almost 400 bucks. Gonna try the build my own extenders cuz I already have the rhino ramps. I don't see the hole though where that guy put the bolt through. Or dig a ditch in my yard lol.

SoCal 370Z · 11-26-2010, 07:39 PM

Quote:

Originally Posted by Fred@ReverseLogic

...the RR-65-2 2-piece 2-stage incline Race Ramps with the integrated XTenders will be even less. Price TBD, but, I expect the street price to be no more than $300 including shipping.

Drawings for 2-piece, 2-stage incline Race Ramps

Going to be very popular among the clear bra installers too!

Waiz · 11-26-2010, 07:42 PM

Thanks for the pic chops, that should help some people out.

Nismoracer · 11-29-2010, 03:18 PM

$300 otd includes shipping.... built in extenders..... When is this going to be available? Still thinking bout it. $150 definitley sign me up for a set but at $300 still have to think bout it. Nice though. Please let us know when they are going on sale. Will it be shortly in a week or 2 or are we talking months?

Fred@ReverseLogic · 11-30-2010, 07:52 AM

Believe me I will be sending up flares when the 2-stage incline ramps are available. When they were going to be custom ramps made for Reverse Logic I expected to be selling them by 1-Dec-2010. But now that they are going to be regular production ramps, I think the introduction may be held up until there is an initial inventory and marketing materials both in hard copy and for the web.

Over 2000 visitors have clicked on the page of my website describing the new ramps. So I know there is plenty of interest.

2-Piece, 2-Stage Incline Race Ramps

Even though the ramps use very little more material than the standard 56" and 67" ramps, I believe there may be more scrap when the ramps are cut from large 300 to 400 pound foam blocks. This is because of the kink along the top line of the incline section. Also, the ramps are shipped by dimensional weight so a 30 pound set of ramps will ship at about the equivalent of an 80 pound package. The 2-stage incline ramps will take a freight cost hit because of the longer length. The RR-80-2 ramps will probably have to be shipped in two cartons.

I will post the estimated shipping date as soon as I have it.

Quote:

Originally Posted by Nismoracer

$300 otd includes shipping.... built in extenders..... When is this going to be available? Still thinking bout it. $150 definitley sign me up for a set but at $300 still have to think bout it. Nice though. Please let us know when they are going on sale. Will it be shortly in a week or 2 or are we talking months?

Fred@ReverseLogic · 12-25-2010, 08:40 AM

Here's a simple ramp test gauge that you can make from a piece of scrap cardboard kicking around the garage.

Materials:
Corrugated cardboard 29.5" long by 6" to 10" wide.

Tools:
Sharp utility knife
Tape measure

Instructions:
Cut the cardboard to a length of 29.5". This is about the length of a flap on a 30" cardboard box. Mark two lines across the width of the cardboard. One line should be 5" from the end of the cardboard, and the second lines should be 1/2" from the opposite end of the cardboard. The two line should be 24" apart. Fold the cardboard 5" from one end and 1/2" from the other end so that it forms the shape of a ramp. It helps if the corrugations run parallel to the width of the cardboard.

Using the ramp gauge:
Place the short end of the ramp up against the front edge of the tire. If the 5" high ramp gauge clears the front bumper and the any other body work then the standard 56" or 67" Race Ramps with a 10.75 degree incline will work with your car. If the ramp gauge is too high, cut the 5" length to 3.5" and try again. If the 3.5" ramp clears, then the standard Race Ramps in combination with an XTender ramp will work with your car.

A new 2-pc, 2-stage incline ramp will be available soon and can be used for cars with very low ground clearance. If the 3.5" high ramp gauge has the necessary clearance, then the new ramp will also work for your car. Basically, the 2-stage incline ramps have an integrated XTender.

Fred@ReverseLogic · 01-24-2011, 11:36 PM

The new ramps are finally in production and begin shipping next week.

The ramps are not considered custom, but, they are not a standard Race Ramps product either. They will be made to order so there will be a week or so processing time before the ramps ship. Complete details are at our website.

Nikkolai · 02-20-2011, 11:21 PM

All I want to use the ramps for are oil changes. I just bought Rhino ramps from Autozone for $29.99 and a 2x10x12 wooden board from Lowes. Cut 2 50" and the 2 22". The Nismo clears it fine but I am on stock height. I followed these directions:

DIY Low Profile Ramps - great for changing oil on lowered g's - G35Driver

Otherwise, if you have the money to spend on the nice race ramps, I would go to that route.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Race Ramps Question	Zeester	Nissan 370Z General Discussions	27	07-12-2010 05:39 PM
Race Ramps / Wheel Cribs	Meridian69	Nissan 370Z General Discussions	5	02-26-2010 07:03 PM
My new Race Ramps.	Ivoidwarranty	Exterior & Interior	17	02-03-2010 05:41 AM
Race Ramps - who's got 'em?	kannibul	Nissan 370Z General Discussions	3	09-10-2009 02:51 PM
Race Ramps 67" 2 piece	Pointman	Nissan 370Z General Discussions	6	09-07-2009 09:49 AM

11-26-2010, 05:18 PM	#17 (permalink)
Nismoracer Enthusiast Member Join Date: Nov 2010 Location: Earth Posts: 420 Drives: 10 Nismo Rep Power: 15	Just looked at prices of the race ramps + extenders $208 + $119 + S&H = $327 + S&H I think it comes out to almost 400 bucks. Gonna try the build my own extenders cuz I already have the rhino ramps. I don't see the hole though where that guy put the bolt through. Or dig a ditch in my yard lol.

11-26-2010, 07:42 PM	#21 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	Thanks for the pic chops, that should help some people out.

11-29-2010, 03:18 PM	#22 (permalink)
Nismoracer Enthusiast Member Join Date: Nov 2010 Location: Earth Posts: 420 Drives: 10 Nismo Rep Power: 15	$300 otd includes shipping.... built in extenders..... When is this going to be available? Still thinking bout it. $150 definitley sign me up for a set but at $300 still have to think bout it. Nice though. Please let us know when they are going on sale. Will it be shortly in a week or 2 or are we talking months?

02-20-2011, 11:21 PM	#26 (permalink)
Nikkolai Base Member Join Date: Jun 2010 Location: DFW Posts: 238 Drives: Boss 302, Frontier Rep Power: 15	All I want to use the ramps for are oil changes. I just bought Rhino ramps from Autozone for $29.99 and a 2x10x12 wooden board from Lowes. Cut 2 50" and the 2 22". The Nismo clears it fine but I am on stock height. I followed these directions: DIY Low Profile Ramps - great for changing oil on lowered g's - G35Driver Otherwise, if you have the money to spend on the nice race ramps, I would go to that route.