Cold Air Intake?

m4a1mustang · 07-07-2010, 09:00 PM

FWIW Stillen Gen 3s do not fit without modification IIRC.

frost · 07-07-2010, 09:03 PM

Then I was wrong about being wrong. I'm still right.

shumby · 07-07-2010, 09:03 PM

omg guys flame on flame on

Trips · 07-07-2010, 09:06 PM

wishihadnav · 07-20-2010, 12:07 AM

Haha..try the injen nismo specific intake.

fuct · 09-13-2010, 02:09 PM

anything new on this subject? school house rock or not...

SE · 09-13-2010, 02:28 PM

We're running the AEM CAI on the shop Nismo...some small modifications needed to get it to fit- just a trimming of the Nismo sheetmetal air guides to fit the washer bottle relocation but that's about it. No tuning and we're running the intakes with a modified exhaust and FI longtubes.

Injen has a model specific intake that addressed the issue of the old model hitting the front bumper due to the angle that the filter sits.

Stillen some members have successfully been able to get it to work by modifying the sheetmetal air ducts like the AEM unit.

Other than that all the short rams will work fine without any mods. So far only the Injen has a model specific application for the Nismo that doesn't require any additional modifications really...just a modified washer bottle that sits in the same location but it is smaller to accomodate the filter.

-Victor

fuct · 09-13-2010, 02:39 PM

whats the scoop on AEM's unit. does the electronic "gizzmo" really help adjust for any leanning or over richness? (hope that made sense)

and if you had it and wanted to run something like osiris later is this a problem?

07-07-2010, 09:00 PM	#1 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6963	FWIW Stillen Gen 3s do not fit without modification IIRC. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

07-07-2010, 09:03 PM	#3 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 45 Posts: 6,288 Drives: your sister Rep Power: 237	omg guys flame on flame on __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

07-07-2010, 09:06 PM	#4 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	__________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what is the best intake short ram or cold air	joey	Nissan 370Z General Discussions	32	05-16-2017 07:14 AM
Cold Air Intake Usefull ?	ZeeYouLater	Engine & Drivetrain	15	03-05-2010 10:33 PM
FS: Stillen 3G cold air intake	spia	Parts for sale (Private Classifieds)	16	12-28-2009 10:10 AM
Short ram or Cold air intake?	MoChu	Nissan 370Z General Discussions	13	09-22-2009 06:53 PM
Stillen Gen 3 Cold Intake	theduke2	Intake/Exhaust	6	07-06-2009 11:07 AM

07-20-2010, 12:07 AM	#5 (permalink)
wishihadnav A True Z Fanatic Join Date: Nov 2009 Location: 90090 Posts: 1,851 Drives: Force Fed Nismo Rep Power: 184	Haha..try the injen nismo specific intake.

09-13-2010, 02:09 PM	#6 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	anything new on this subject? school house rock or not...

09-13-2010, 02:28 PM	#7 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 24	We're running the AEM CAI on the shop Nismo...some small modifications needed to get it to fit- just a trimming of the Nismo sheetmetal air guides to fit the washer bottle relocation but that's about it. No tuning and we're running the intakes with a modified exhaust and FI longtubes. Injen has a model specific intake that addressed the issue of the old model hitting the front bumper due to the angle that the filter sits. Stillen some members have successfully been able to get it to work by modifying the sheetmetal air ducts like the AEM unit. Other than that all the short rams will work fine without any mods. So far only the Injen has a model specific application for the Nismo that doesn't require any additional modifications really...just a modified washer bottle that sits in the same location but it is smaller to accomodate the filter. -Victor

09-13-2010, 02:39 PM	#8 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	whats the scoop on AEM's unit. does the electronic "gizzmo" really help adjust for any leanning or over richness? (hope that made sense) and if you had it and wanted to run something like osiris later is this a problem?