Oil Cooler Kits for NISMO?

F1loco · 07-20-2010, 07:30 AM

Ok, was looking into this and noticed this disclaimer on the Stillen website:

NOTE: Oil Cooler Kit cannot be mounted on a 350Z with a long and low aftermarket cold air intake system due to interference issues. These kits will not fit Nismo 370Z models.

WTH? Do we have an option here? I'm guessing that fancy pneumatic stabilizer we have in the front is right where the oil cooler would mount. Has anyone tracked a NISMO and do we have the overheating problems as other Z's? Alternatives, bigger oil sump for more oil?

m4a1mustang · 07-20-2010, 08:08 AM

Do a search and you'll find a number of NISMO owners that have fitted oil coolers. Vipor has a DIY on one.

vipor · 07-20-2010, 08:11 AM

Most kits will fit, although some require removing the damper.

Here's my DIY:

DIY: Oil Cooler Installation on a Nismo (Damper Included!) - vipor

SE · 07-20-2010, 12:56 PM

I've been promising to post pictures of my setup but I've never had the time to take off my front bumper to do so.

Here's your alternatives:

- Mount something smaller than a 19-row and don't worry about the stabilizer bar.
- Mount a 19-row or larger and flip the stabilizer bar and use something to prevent it from rubbing (see Vipor's DIY)
- Mount anything you want and remove the stabilizer bar.

I have another alternative but like I said I've been too busy to take off my front bumper.

07-20-2010, 07:30 AM	#1 (permalink)
F1loco Base Member Join Date: Jul 2010 Location: Sunshine Posts: 203 Drives: 09 Nismo Rep Power: 15	Oil Cooler Kits for NISMO? Ok, was looking into this and noticed this disclaimer on the Stillen website: NOTE: Oil Cooler Kit cannot be mounted on a 350Z with a long and low aftermarket cold air intake system due to interference issues. These kits will not fit Nismo 370Z models. WTH? Do we have an option here? I'm guessing that fancy pneumatic stabilizer we have in the front is right where the oil cooler would mount. Has anyone tracked a NISMO and do we have the overheating problems as other Z's? Alternatives, bigger oil sump for more oil?

07-20-2010, 08:08 AM	#2 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6963	Do a search and you'll find a number of NISMO owners that have fitted oil coolers. Vipor has a DIY on one. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

07-20-2010, 08:11 AM	#3 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	Most kits will fit, although some require removing the damper. Here's my DIY: DIY: Oil Cooler Installation on a Nismo (Damper Included!) - vipor __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
auto infantry nismo replica kits!!	AutoInfantry	Body Interior/Exterior	68	02-25-2010 03:20 PM
GT Motorsports: GTM Engine and Transmission Oil Cooler Kits!	George@GTM	Forced Induction	45	08-24-2009 06:28 PM
Nismo Z Body Kits, Spoilers, Nose, Side Skirts	scruffydog	Exterior & Interior	9	04-20-2009 08:12 PM

07-20-2010, 12:56 PM	#4 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 24	I've been promising to post pictures of my setup but I've never had the time to take off my front bumper to do so. Here's your alternatives: - Mount something smaller than a 19-row and don't worry about the stabilizer bar. - Mount a 19-row or larger and flip the stabilizer bar and use something to prevent it from rubbing (see Vipor's DIY) - Mount anything you want and remove the stabilizer bar. I have another alternative but like I said I've been too busy to take off my front bumper.