Originally Posted by Electrify904 Couple quick garage shots Looking CLEAN!!! How hard was it to remove the one from the fenders? I already did mirror and they came off immediately,
|
|
LinkBack | Thread Tools | Display Modes |
07-05-2016, 06:47 PM | #16 (permalink) |
Base Member
Join Date: Apr 2011
Location: Far West TX
Posts: 151
Drives: 16 PW nismO Tech
Rep Power: 14 |
Looking CLEAN!!! How hard was it to remove the one from the fenders?
I already did mirror and they came off immediately, but when I went to do fenders they were not as easy, so I'm waiting/wanting to do fenders, front and back bumper. Any suggestions?
__________________
-16 PW/nismO TecH/7AT/Zaktek paint coating/Z1 post-MAF tubes+Side PCV Breather Hose/K&N Drop Ins/F.I. LTH's/ F.I. SS TDX w/12" Resonators- " I LOVE the SMELL of Headers in the morning!!!!" |
07-05-2016, 07:15 PM | #17 (permalink) | |
Base Member
Join Date: May 2015
Location: Florida
Posts: 174
Drives: 16 Nismo 6MT BS
Rep Power: 10 |
Quote:
First, I drilled the rivets out with a small drill bit. The hard part was the double sided tape. I used my fingers to rub as much of the tape off as i could, some came off easily and some of it didn't want to come off right away. I used Goo Gone and a microfiber towel to clean off stubborn stuff. Goo Gone is good because it's citrus based and won't harm the paint. It takes some time to do it properly so you have to have a little patience.
__________________
JAX GZ-R BC Forged 2016 Brilliant Silver NISMO 6MT Past: 2004 6MT G Coupe and 2004 6MT 350Z |
|
07-14-2016, 04:48 PM | #19 (permalink) |
A True Z Fanatic
Join Date: Sep 2010
Location: Austin, Tx.
Posts: 4,363
Drives: Prototype
Rep Power: 2684377 |
Jet, that is what I did and used WD-40 or you can use goo gone followed by wax and your done. I hardly used any WD-40, then used some soap and water on a clean rag, then wax. Took me about 20 minutes.
|
07-14-2016, 07:58 PM | #20 (permalink) | |
Base Member
Join Date: Sep 2013
Location: Gastonia, NC
Posts: 34
Drives: '16 370Z Nismo Tech
Rep Power: 12 |
Quote:
I just got my Nismo on Monday, drove it home, out to work on Tuesday & she's sitting at the airport waiting on me to get home! Can't WAIT for this weekend!!!!! |
|
08-12-2016, 04:49 PM | #23 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: Florida
Posts: 4,105
Drives: Spirited
Rep Power: 11716 |
In my album
__________________
2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq |
08-13-2016, 09:26 PM | #25 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: Florida
Posts: 4,105
Drives: Spirited
Rep Power: 11716 |
Stripes are stripes...14 Nismo bro. Sorry...I, sure there are pics of 15 up with stripe remoral. Sorry
__________________
2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
370z nismo with muffle removed | JohnYu | Intake/Exhaust | 3 | 06-10-2013 10:19 PM |
Nismo Exhaust Resonators Removed | johnnydrama | Intake/Exhaust | 10 | 07-19-2012 02:23 PM |