Clutch sticking half way to floor

macwest · 07-22-2015, 01:58 PM

Quote:

Originally Posted by Uxi

Service rep told me replaced MC when they did the disc and CSC but apparently lied since the MC wasn't on the invoice...

Posting your failure of the CSC is when I made up my mind to do it in mine. Let me ask you a question do you hear any engine noise (only with windows up) When taking off hard it sounds like valve float or marbles shaking more prevalent when oil hot and revs dropping in Gear. It is annoying. Mac PS I have the Nissan Ester oil in mine.

eastwest2300 · 07-22-2015, 02:28 PM

Quote:

Originally Posted by macwest

Mine is at shop now for the install and I'm having them put on an intake . They are using dot 4 some brand made in Germany for fluid in MC and putting in redline in trans which I already did but told me some would come out pulling drive shaft. The intake they are installing is k And N short ram using AFE oil free filters.(that was my decision not there's). Mac

hopefully your clutch fluid is good.. whatever they're using.

macwest · 07-22-2015, 02:42 PM

Quote:

Originally Posted by eastwest2300

hopefully your clutch fluid is good.. whatever they're using.

this is it.

Jsolo · 07-22-2015, 02:55 PM

That's supposed to be good stuff. Used in many european and german cars as OE fluid. I'm not sure about the LV spec, we're not in alaska here.

eastwest2300 · 07-22-2015, 02:58 PM

Quote:

Originally Posted by macwest

this is it.

As long as you did your homework and know its made for this car, works under high temps, and does the job, I guess thats all that matters.

Jsolo · 07-22-2015, 03:23 PM

Here's the press release on the product.

http://www.crpindustries.com/pressre...rake_Fluid.pdf

If it gets to -76F in chicago or NY, then hell has officially frozen over

macwest · 07-23-2015, 05:27 PM

Yeah got my car back with no damage!!!! Here are pics of the old parts and my new KN intake with Dry filters installed. Guys the difference in my shifting is wonderful I don't know if its the fluid or what everything feels better . The sound the intake makes is Awesome but I feel I lost some low end on the Car. Mac

macwest · 07-23-2015, 05:34 PM

And of course a welcome home wash. God I am very sick. Wash it every day need help.
ps the car has so much wax on it the water is flying back at me.

KoolKarmaJoe · 07-23-2015, 05:39 PM

Quote:

Originally Posted by macwest

Yeah got my car back with no damage!!!! Here are pics of the old parts and my new KN intake with Dry filters installed. Guys the difference in my shifting is wonderful I don't know if its the fluid or what everything feels better . The sound the intake makes is Awesome but I feel I lost some low end on the Car. Mac

Nice pic's. I'm happy for you to get your Z back.

Sent from my XT1254 using Tapatalk

macwest · 07-24-2015, 05:25 PM

[QUOTE=KoolKarmaJoe;3265403]Nice pic's. I'm happy for you to get your Z back.

Thanks! the intake sound is addictive. Mac

Uxi · 07-24-2015, 06:33 PM

Oops, didn't see that part about the noise. No, haven't noticed anything like marbles even when taking off hard. The engine is rather... abrasive at the higher end compared to Honda, but I love the high 'mid-range' I guess you'd call it where it sounds like a machine winding up more than an engine sound.

Love the intakes. Typhoon? Those are on my list...

macwest · 07-24-2015, 06:52 PM

Quote:

Originally Posted by Uxi

Oops, didn't see that part about the noise. No, haven't noticed anything like marbles even when taking off hard. The engine is rather... abrasive at the higher end compared to Honda, but I love the high 'mid-range' I guess you'd call it where it sounds like a machine winding up more than an engine sound.

Love the intakes. Typhoon? Those are on my list...

Yes Typhoon but don't use the kn filters if they don't mess your maf they will mess up the throttle body see pic of the filters I used (oil free) . Mac

need4speed255 · 07-25-2015, 04:07 PM

Quote:

Originally Posted by Uxi

Oops, didn't see that part about the noise. No, haven't noticed anything like marbles even when taking off hard. The engine is rather... abrasive at the higher end compared to Honda, but I love the high 'mid-range' I guess you'd call it where it sounds like a machine winding up more than an engine sound.

Love the intakes. Typhoon? Those are on my list...

I think he may be referring to the clutch or driveline. It does make a rattling sound(like marbles) if your take off is not so smooth.

macwest · 08-01-2015, 08:34 PM

Just to update a week with my heavy duty slave cylinder and kn typhoon and no issues no dash lights from intake and clutch feels great. Mac

macwest · 09-09-2015, 10:37 PM

still running great no sel light or problems with slave cylinder.Mac

07-22-2015, 02:55 PM	#64 (permalink)
Jsolo Track Member Join Date: Dec 2011 Location: chicago Posts: 783 Drives: '12 G37 6MT Rep Power: 14	That's supposed to be good stuff. Used in many european and german cars as OE fluid. I'm not sure about the LV spec, we're not in alaska here. __________________ G37S Sedan 6MT, Eibach swaybars, Invidia Exhaust, Weaker Clutch Pedal Spring For sale links

07-22-2015, 03:23 PM	#66 (permalink)
Jsolo Track Member Join Date: Dec 2011 Location: chicago Posts: 783 Drives: '12 G37 6MT Rep Power: 14	Here's the press release on the product. http://www.crpindustries.com/pressre...rake_Fluid.pdf If it gets to -76F in chicago or NY, then hell has officially frozen over eastwest2300 likes this. __________________ G37S Sedan 6MT, Eibach swaybars, Invidia Exhaust, Weaker Clutch Pedal Spring For sale links

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch sticking	bvar90	Engine & Drivetrain	11	05-19-2015 10:09 AM
Sticking clutch	inf3kted	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	6	01-12-2015 05:06 PM
Clutch pedel sticking	gthomas	Nissan 370Z General Discussions	1	03-06-2012 05:08 PM
clutch sticking mid release	fosingwo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-22-2011 05:43 AM
clutch sticking?	Pharmacist	Nissan 370Z General Discussions	32	11-11-2011 09:57 PM

07-24-2015, 05:25 PM	#70 (permalink)
macwest Base Member Join Date: Aug 2012 Location: nyc Posts: 57 Drives: 2015 370 Nismo Rep Power: 13	[QUOTE=KoolKarmaJoe;3265403]Nice pic's. I'm happy for you to get your Z back. Thanks! the intake sound is addictive. Mac

07-24-2015, 06:33 PM	#71 (permalink)
Uxi Enthusiast Member Join Date: Apr 2015 Location: Southern California Posts: 303 Drives: 16 NISMO Tech PW 6MT Rep Power: 3598	Oops, didn't see that part about the noise. No, haven't noticed anything like marbles even when taking off hard. The engine is rather... abrasive at the higher end compared to Honda, but I love the high 'mid-range' I guess you'd call it where it sounds like a machine winding up more than an engine sound. Love the intakes. Typhoon? Those are on my list...

08-01-2015, 08:34 PM	#74 (permalink)
macwest Base Member Join Date: Aug 2012 Location: nyc Posts: 57 Drives: 2015 370 Nismo Rep Power: 13	Just to update a week with my heavy duty slave cylinder and kn typhoon and no issues no dash lights from intake and clutch feels great. Mac

09-09-2015, 10:37 PM	#75 (permalink)
macwest Base Member Join Date: Aug 2012 Location: nyc Posts: 57 Drives: 2015 370 Nismo Rep Power: 13	still running great no sel light or problems with slave cylinder.Mac