Brand new Z 20k for mods

Beginner Z · 10-04-2013, 06:33 PM

JBURK - I test drove a sport model and didnt like the synchro rev. And I will be buying bigger breaks, lsd and wheels.

Chuck33079 · 10-04-2013, 06:37 PM

Quote:

Originally Posted by Beginner Z

JBURK - I test drove a sport model and didnt like the synchro rev. And I will be buying bigger breaks, lsd and wheels.

Big brakes, wheels and a LSD knocks your budget down to where FI is a stretch. You can turn synchro rev off.

Beginner Z · 10-04-2013, 07:00 PM

Chuck - In that case, I may need to increase my operating budget. I just want to go fast!

Chuck33079 · 10-04-2013, 07:04 PM

Quote:

Originally Posted by Beginner Z

Chuck - In that case, I may need to increase my operating budget. I just want to go fast!

Take a look through my build thread. I pretty much did the same thing you're looking to do. I'd link you to it, but doing it from my phone is too much effort

. It's a pretty good breakdown of supporting mods, etc. I can tell you that 15-20k was around what I spent including labor, and I started with the sport package. It's snowballed since then, but car projects always do. And go with the turbo. Eventually you'll want more power, and its a lot easier to turn up the boost than it is to swap pullies.

coolvans1988 · 10-04-2013, 07:29 PM

sorry for your lost mate!
but welcome to the Z fam.

Beginner Z · 10-08-2013, 11:36 PM

What do you guys think of this as a starting point. A nice gtm kit. https://www.gtmotorsports.com/produc...roductid=16691. I was reading that super charger are better for a daily driver and easier to up keep. Thoughts?

XiP · 10-08-2013, 11:42 PM

sorry for your loss
don't go too crazy spending money
i went crazy and ended up selling everything at a loss when i came back to my senses

Chuck33079 · 10-08-2013, 11:42 PM

Quote:

Originally Posted by Beginner Z

What do you guys think of this as a starting point. A nice gtm kit. https://www.gtmotorsports.com/produc...roductid=16691. I was reading that super charger are better for a daily driver and easier to up keep. Thoughts?

You're in good hands with GTM. If I were you, I'd give mike over there a call and discuss what you want from the car. They'll give you pros and cons on each. There's a lot of threads here debating the two. Either will work fine for a daily driver provided you get all the necessary supporting mods and get a good tune.

WGJ · 10-09-2013, 10:19 PM

Sorry to hear about your loss. Welcome!

dAvenue · 10-09-2013, 10:40 PM

Sorry for your loss, bro. I hope to see you start a build thread [if you haven't already] and watch your progress.

Beginner Z · 10-11-2013, 09:41 AM

Ordered some new gear. I cant wait till it arrives and I can get them installed.

exhaust - fast intentions tdx cat back
hfc - fast intentions
header - none yet
FI - GTM twin turbo stage 2 (turn key) - powder coated black
cool - GTM 34 row oil cooler
injectors - bosch 650cc

And a bunch of other parts that were recommended for me.

Chuck33079 · 10-11-2013, 09:42 AM

Quote:

Originally Posted by Beginner Z

Ordered some new gear. I cant wait till it arrives and I can get them installed.

exhaust - fast intentions tdx cat back
hfc - fast intentions
header - none yet
FI - GTM twin turbo stage 2 (turn key) - powder coated black
cool - GTM 34 row oil cooler
injectors - bosch 650cc

And a bunch of other parts that were recommended for me.

Why not go with GTM's downpipes instead of HFCs?

theDreamer · 10-11-2013, 09:43 AM

You will not need headers with the TT kit, I would stop the order on the HFC. You will burn them up and clog your exhaust (with a possibility of having it shoot backwards towards the engine). Either go with test pipes or 3" down pipes.

Chuck33079 · 10-11-2013, 09:44 AM

Personally, I'd change the GTM order to the 3" downpipes with external wastegates, and change the FI order to the 3" catback.

Beginner Z · 10-11-2013, 09:44 AM

Good advice. Will do. Lol. I best make some phone calls.

10-04-2013, 07:00 PM	#18 (permalink)
Beginner Z Base Member Join Date: Sep 2013 Location: Montana Posts: 15 Drives: 2013 370z base-MT Rep Power: 12	Chuck - In that case, I may need to increase my operating budget. I just want to go fast! tower74 likes this.

10-08-2013, 11:36 PM	#21 (permalink)
Beginner Z Base Member Join Date: Sep 2013 Location: Montana Posts: 15 Drives: 2013 370z base-MT Rep Power: 12	What do you guys think of this as a starting point. A nice gtm kit. https://www.gtmotorsports.com/produc...roductid=16691. I was reading that super charger are better for a daily driver and easier to up keep. Thoughts? Last edited by Beginner Z; 10-08-2013 at 11:39 PM. Reason: typo

10-08-2013, 11:42 PM	#22 (permalink)
XiP A True Z Fanatic Join Date: Dec 2011 Location: no clipping Posts: 11,096 Drives: ↑ ↓ Rep Power: 533	sorry for your loss don't go too crazy spending money i went crazy and ended up selling everything at a loss when i came back to my senses __________________ I <3 Frost!!!

10-09-2013, 10:40 PM	#25 (permalink)
dAvenue A True Z Fanatic Join Date: Aug 2010 Location: present Posts: 1,971 Drives: angry Rep Power: 49	Sorry for your loss, bro. I hope to see you start a build thread [if you haven't already] and watch your progress. __________________ Takeda \| Stillen \| Z1 \| Invidia \| Mishimoto \| CSF \| Megan Racing \| Koni \| Eibach \| SPC \| Forgestar \| Seibon

10-11-2013, 09:43 AM	#28 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	You will not need headers with the TT kit, I would stop the order on the HFC. You will burn them up and clog your exhaust (with a possibility of having it shoot backwards towards the engine). Either go with test pipes or 3" down pipes. Chuck33079 likes this. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

10-04-2013, 06:33 PM	#16 (permalink)
Beginner Z Base Member Join Date: Sep 2013 Location: Montana Posts: 15 Drives: 2013 370z base-MT Rep Power: 12	JBURK - I test drove a sport model and didnt like the synchro rev. And I will be buying bigger breaks, lsd and wheels.

10-04-2013, 07:29 PM	#20 (permalink)
coolvans1988 Enthusiast Member Join Date: Oct 2012 Location: NA Posts: 402 Drives: 2013 370z PW A/T Rep Power: 13	sorry for your lost mate! but welcome to the Z fam.

10-09-2013, 10:19 PM	#24 (permalink)
WGJ Base Member Join Date: May 2012 Location: Maryland Posts: 38 Drives: 09 370z tour/sport M Rep Power: 13	Sorry to hear about your loss. Welcome!

10-11-2013, 09:41 AM	#26 (permalink)
Beginner Z Base Member Join Date: Sep 2013 Location: Montana Posts: 15 Drives: 2013 370z base-MT Rep Power: 12	Ordered some new gear. I cant wait till it arrives and I can get them installed. exhaust - fast intentions tdx cat back hfc - fast intentions header - none yet FI - GTM twin turbo stage 2 (turn key) - powder coated black cool - GTM 34 row oil cooler injectors - bosch 650cc And a bunch of other parts that were recommended for me.

10-11-2013, 09:44 AM	#29 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Personally, I'd change the GTM order to the 3" downpipes with external wastegates, and change the FI order to the 3" catback. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

10-11-2013, 09:44 AM	#30 (permalink)
Beginner Z Base Member Join Date: Sep 2013 Location: Montana Posts: 15 Drives: 2013 370z base-MT Rep Power: 12	Good advice. Will do. Lol. I best make some phone calls.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mods and such.	Sinjection	Nissan 370Z General Discussions	7	03-17-2013 12:08 AM
[FOR SALE] Brand NEW CENTER CONSOLE!!! NOT OPENED. BRAND NEW!!!	djsekz	Parts for sale (Private Classifieds)	2	02-11-2012 02:12 AM
For Sale:brand new nintendo super famicom(super nintendo) brand new never played with	zuperman 370	Misc Items for sale (No Z stuff)	13	12-12-2011 09:20 PM
Outside Mods	Old Crow	Exterior & Interior	32	03-02-2011 09:05 PM