My 370z "unicorn"

Rusty

Nice find.

I would still bleed the brakes and clutch fluid with something like Motul 600.

For the fuel pump top hat. Get one of these from CJM. Instead of appling epoxy on it.

https://cj-motorsports.com/products/...-pump-hat-370z

Gallery gaskets. Get these. Tip. Use locktite on the screws and once torqued. Use a center punch on the rim of the screw and dimple it. This will keep the screws from backing out.

EPS Tuning Oil Gallery Gasket/Hardware Kit

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

filip00

Hey Rusty, about this fuel pump top hat.....I'm looking at what I'm going to do through winter months and probably this is one of the things. Does this also resolve the fuel starvation issue? While I'm in there, I'm looking at resolving that issue as well. Any recommendations?

__________________
ride epic drive epic

cv129

The billet top hat solves a different issue. CJMotorsports used to sell a Road Race Fuel Pump kit. Seems like that item is no longer on his website. If I recall correctly, Charles had stated that it’s not enough sales volume to make another batch of RRP, but that was some time ago (when someone complained about the lack of available inventory). You may confirm that with Charles the owner. Also see thread below.

RHD Japan Fuel Starvation Solution ?

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield