I need help.

The370zguy12

Is there any speed shops in arizona that works on boosted 370z's that are really good? My car feels like its in limb mode it drives perfect under 4k rpm but once you get to 4k rpm it stutters and jerks around.

The370zguy12

I think it may be a tune issue or afr issue it happens at 4k when boost starts to build.

The370zguy12

it could be this OBDII Code P0106 - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance Problem | Nissanhelp.com is this a tuneing issue?

SouthArk370Z

Any DTCs?

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

The370zguy12

hey south sorry what does dtc's stand for?

XwChriswX

In Phoenix, the only shops I can think of are VividRacing, DynoComp, you'd have a better chance if you drove out to SoCal and talked to GTM... I'm sure that's not what you'd like to do, but AZ isn't prevalent for tuning shops.

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

SouthArk370Z

Diagnostic Trouble Code. Your car is amazing good at figuring out what's wrong and doesn't mind sharing. Get an OBD scanner (you can borrow or rent one at most auto parts stores), plug it into the DLC (under the dash, next to the steering column. AKA OBD port), read DTC(s), look up code on the 'Net.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

edub370

what plugs and what gap are u running?

__________________

The370zguy12

oh yes i went to a oreily auto store they do free read outs the code that was thrown was p0106 my shop who installed the turbo said its a code not to worry about and to just delete it out is what they said.

SouthArk370Z

Sounds like you are exceeding the range of the MAP sensor. "The PCM looks for any change in manifold pressure to be preceded by a change in engine load in the form of changes in throttle angle, engine speed, or Exhaust Gas Recirculation (EGR) flow. If the PCM doesn't see any of these factors change while detecting a rapid change in MAP value, it will set a P0106."
P0106 - MAP/Barometric Pressure Circuit Range/Performance Problem

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Glokwork

I had the same 106 MAP code 10 miles after boost..no worries

__________________
Precision Turbo Tial Turbosmart Fast Intentions Seibon Prosport Advan AD08R HKS Hipermax IV Nismo Evo-R PW:JDM UpRev Pioneer Escort Volk CE28N
Top Mount Single Turbo 551whp/482wtq@10psi

NickTurnon

Theres a Tuner in Tempe that i found out about from fellow 370z people in the area.

Xact Dyno- Google the shop and call em

__________________
2009 Brilliant Silver BASE 7AT | TEIN S-Tech Springs | K&N Drop Ins & z1 Maf Tubes | AAM S-Line Short Tails | 5% Tint | 20MM Spacers | Sport Spoiler NickTurnon's 370z Build

Baer383

It you are running Osiris/Uprev like I'm running I also had this code ,Sam at GTM told me to turn off the dtc with Uprev never had a problem since.

__________________
2013 ZL1

754 rwhp 747 rwtq

The370zguy12

I turned it off and the car is still limp mode just I have a appointment on the 26th with ums I may have mechanical issues this sux I only have 7 k miles

Baer383

Did you try disconnecting the battery?

__________________
2013 ZL1

754 rwhp 747 rwtq