Midwest Chat Thread everyone is welcome!

ZMan8 · 04-14-2012, 10:48 AM

hmm I think you need direct light from the ground level shining on them to really see , it's really hard to tell on yours. From the pic they look almost the same. I'm probably going to call Tony see what he thinks.

erkthejerk73 · 04-14-2012, 11:03 AM

Quote:

Originally Posted by ZMan8

hmm I think you need direct light from the ground level shining on them to really see , it's really hard to tell on yours. From the pic they look almost the same. I'm probably going to call Tony see what he thinks.

you can try and adjust the farthest rear hanger, i unscrewed it yesterday, there are 3 screws and you can adjust it a tiny bit, it might help.

ZMan8 · 04-14-2012, 11:06 AM

Quote:

Originally Posted by erkthejerk73

you can try and adjust the farthest rear hanger, i unscrewed it yesterday, there are 3 screws and you can adjust it a tiny bit, it might help.

That's what I will likely do, unscrew right rear hanger and add 1 or maybe 2 washers.

erkthejerk73 · 04-14-2012, 11:10 AM

i have a small exhaust leak, i made my own gaskets out of cork, hope that isnt the issue, also had to buy my own hardware as the seller didnt give me any. I actually think the bolts i used are the issue and they are not 100% threaded and have a gap of unthreaded part of the bolt i think that section is to large and will not allow me to torque the bolts down properly. will find out soon when i decide to get back under her! lol (must get a creeper to save my back on concrete)

ZMan8 · 04-14-2012, 11:20 AM

Quote:

Originally Posted by erkthejerk73

i have a small exhaust leak, i made my own gaskets out of cork, hope that isnt the issue, also had to buy my own hardware as the seller didnt give me any. I actually think the bolts i used are the issue and they are not 100% threaded and have a gap of unthreaded part of the bolt i think that section is to large and will not allow me to torque the bolts down properly. will find out soon when i decide to get back under her! lol (must get a creeper to save my back on concrete)

Use a cardboard box! works wonders for your back

Also call Tony, he will ship you the hardware maybe even for free (or a small fee).

erkthejerk73 · 04-14-2012, 11:25 AM

just found out the bolt is the issue, not 100% sure y i didnt think of that yesterday, but good news i found some bolts i never used for my ART pipes so those will work and then i found some 1/4 inch spacers from my old plenum spacer that will work on the other bolts that i have to use! fugging thinking outside le box!

ZMan8 · 04-14-2012, 11:25 AM

Quote:

Originally Posted by erkthejerk73

just found out the bolt is the issue, not 100% sure y i didnt think of that yesterday, but good news i found some bolts i never used for my ART pipes so those will work and then i found some 1/4 inch spacers from my old plenum spacer that will work on the other bolts that i have to use! fugging thinking outside le box!

erkthejerk73 · 04-14-2012, 11:25 AM

Quote:

Originally Posted by ZMan8

Use a cardboard box! works wonders for your back

Also call Tony, he will ship you the hardware maybe even for free (or a small fee).

shipping takes time, i am more of a if i dont have it i will improvise kinda guy!

ZMan8 · 04-14-2012, 11:26 AM

Quote:

Originally Posted by erkthejerk73

shipping takes time, i am more of a if i dont have it i will improvise kinda guy!

what ever works man! as long as you get it fixed then

erkthejerk73 · 04-14-2012, 11:32 AM

Quote:

Originally Posted by ZMan8

what ever works man! as long as you get it fixed then

do we hug now?

erkthejerk73 · 04-14-2012, 11:35 AM

btw i have a cardboard box down but didnt use it yesterday, now its raining so no creeper will be had today, no sense of driving in the rain to get under the car later just to get rained on from road water.!

ZMan8 · 04-14-2012, 11:36 AM

Quote:

Originally Posted by erkthejerk73

do we hug now?

Here you go:

( Click to show/hide )

ZMan8 · 04-14-2012, 11:37 AM

Quote:

Originally Posted by erkthejerk73

btw i have a cardboard box down but didnt use it yesterday, now its raining so no creeper will be had today, no sense of driving in the rain to get under the car later just to get rained on from road water.!

Yeah I just used a thick card board box and it was pretty good for laying on...the problem with creepers is they rais you up (even the low profile ones) which means less room.

erkthejerk73 · 04-14-2012, 11:38 AM

Quote:

Originally Posted by ZMan8

Yeah I just used a thick card board box and it was pretty good for laying on...the problem with creepers is they rais you up (even the low profile ones) which means less room.

yeah scumbag low profile jacks that done raise the car up much!

ZMan8 · 04-14-2012, 11:40 AM

I have low profile jack that can raise the car to 24" It's the jack stands that are limiting.

04-14-2012, 10:48 AM	#286 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 658	hmm I think you need direct light from the ground level shining on them to really see , it's really hard to tell on yours. From the pic they look almost the same. I'm probably going to call Tony see what he thinks. __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

04-14-2012, 11:40 AM	#300 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 658	I have low profile jack that can raise the car to 24" It's the jack stands that are limiting. __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
San Antonio Chat Thread	pg6speed	Texas	656	09-06-2013 07:41 AM
Hawaii Chat Thread	definitionxmk	Hawaii	455	08-20-2013 02:07 PM
Houston Chat Thread	d&g35	Texas	931	06-11-2013 07:03 PM
Treasure Coast, FL Chat Thread	6spd	South East Region	38	03-20-2012 09:31 PM

04-14-2012, 11:10 AM	#289 (permalink)
erkthejerk73 Track Member Join Date: Mar 2011 Location: cincinnati Posts: 927 Drives: 13 F150 FX4 eb Rep Power: 15	i have a small exhaust leak, i made my own gaskets out of cork, hope that isnt the issue, also had to buy my own hardware as the seller didnt give me any. I actually think the bolts i used are the issue and they are not 100% threaded and have a gap of unthreaded part of the bolt i think that section is to large and will not allow me to torque the bolts down properly. will find out soon when i decide to get back under her! lol (must get a creeper to save my back on concrete)

04-14-2012, 11:25 AM	#291 (permalink)
erkthejerk73 Track Member Join Date: Mar 2011 Location: cincinnati Posts: 927 Drives: 13 F150 FX4 eb Rep Power: 15	just found out the bolt is the issue, not 100% sure y i didnt think of that yesterday, but good news i found some bolts i never used for my ART pipes so those will work and then i found some 1/4 inch spacers from my old plenum spacer that will work on the other bolts that i have to use! fugging thinking outside le box!

04-14-2012, 11:35 AM	#296 (permalink)
erkthejerk73 Track Member Join Date: Mar 2011 Location: cincinnati Posts: 927 Drives: 13 F150 FX4 eb Rep Power: 15	btw i have a cardboard box down but didnt use it yesterday, now its raining so no creeper will be had today, no sense of driving in the rain to get under the car later just to get rained on from road water.!