Kansas City

tower74 · 10-23-2014, 11:25 PM

Quote:

Originally Posted by ghotnit

I would be game for a drive in 2 weeks. The weekend of Halloween would be cool. I was going to TX that weekend but bought the car instead.

The race would of been worth it....the car will always be there.

On a side note, now that I have minute, is anyone going to COTA next weekend? If so, hit me up. I will be driving the car down to the race.

If everything goes well and stays the way it's moving I'm up for meeting up in 2 weeks (weekend after Halloween)

Not CODA but COTA (for those who do not follow F1...Circuits of the Americas in Austin, TX)

pbhakta · 10-28-2014, 04:17 PM

Since no one has replied on here in a while, I will leave this lil funny story here with ya guys with my experience at work lately.

Official Crappy Parkers Thread

mcconned · 10-28-2014, 05:33 PM

Quick Reminder This event is THIS Sunday. I have also arranged a get together afterwards at Murray's Table and Taps at 12921 State Line Road on the Missouri side.

Quote:

Originally Posted by mcconned

I know this is early notice but I wanted to give you all plenty of notice to join the Heart of America Z Car Club Sunday, November 2nd from 1 to 4 pm at the Armacost Museum in Grandview, MO.

If you're not familiar with "The Armacost", it is a private automobile collection housed in one of the finest facilities in Kansas City. This is not generally open to the public but is open by special arrangement. I have made that arrangement.

The collection includes everything from a Ferrari F40 to a 1919 Rolls Royce to British sports cars to American muscle cars to turn of the 20th century Harley Davidson motor cycles. Personally, my favorite part is the collection of Studebakers. The Armacost family was a Studebaker dealer in Kansas City for decades. Consequently, they have several.

If you have been there before you might think "Been there. Done that. Seen that." The Armacost collection is quite extensive and more than may be housed here. They cars on display constantly changes. You never know what you will see until you get there!

"The Armacost" has set the following guidelines:
1. No one under 16 allowed.
2. A $5 donation/admittance is required. One Hundred percent of the money collected is donated to a local Grandview charity.
3. No food or drink allowed.

Bringing a camera is STRONGLY encouraged.

More info here:
HOVER MOTOR COMPANY: The Armacost Auto Museum in Grandview is a little-known Kansas City treasure

"The Armacost" is located at :
4200 E 135th St. Grandview, MO 64030

I'll provide you with updates and more details later. More info will be made available at Heart of America Z Car Club or Heart of America Z Car Club on Facebook or my Facebook page.. Dan McConnell

This is an open invitation. Please share with your "responsible" friends, car club, organization, etc.

Thanks in advance,

edub370 · 10-29-2014, 02:59 PM

everyone see that world record vhr build on the engine section? 371whp at 8200rpms! ooo that sound would be epic

Gilianz · 11-02-2014, 02:47 AM

Well... Good news is my car is on the coilovers. Bad news I didn't get to order my spacers in time. So I am still looking. Do you guys think the Z1 spacers are good enough? Don't feel like forking over another extra $100 for spacers when Z1 has 20/25 (hub centric) going for about $220 with shipping.

ghotnit · 11-02-2014, 12:00 PM

Quote:

Originally Posted by Gilianz

Well... Good news is my car is on the coilovers. Bad news I didn't get to order my spacers in time. So I am still looking. Do you guys think the Z1 spacers are good enough? Don't feel like forking over another extra $100 for spacers when Z1 has 20/25 (hub centric) going for about $220 with shipping.

I found hub centric spacers on Amazon for $56/pair. I put them on yesterday and they are great. Very good quality. They look just like the HR spacers and are designed just like them. They are so much alike, I think they are the same. I got mine in 20mm.

Gilianz · 11-02-2014, 11:22 PM

Quote:

Originally Posted by ghotnit

I found hub centric spacers on Amazon for $56/pair. I put them on yesterday and they are great. Very good quality. They look just like the HR spacers and are designed just like them. They are so much alike, I think they are the same. I got mine in 20mm.

Could you get me a link to the ones that you bought?

ghotnit · 11-03-2014, 09:22 AM

Quote:

Originally Posted by Gilianz

Could you get me a link to the ones that you bought?

Here is the link.

http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

edub370 · 11-03-2014, 11:57 AM

I used Ichiba bolt on spacers. never had an issue

cregan6318 · 11-04-2014, 07:50 PM

Hopefully I will have the Z back tomorrow. In case you didn't hear the slave cylinder went out last Thursday night.

pbhakta · 11-05-2014, 09:54 AM

Quote:

Originally Posted by cregan6318

Hopefully I will have the Z back tomorrow. In case you didn't hear the slave cylinder went out last Thursday night.

Curious...how many miles on the car?

cregan6318 · 11-05-2014, 09:52 PM

Less than 22k. No call from the dealer today. Hopefully tomorrow

project_zed · 11-06-2014, 11:40 PM

Has anyone gotten a tune for their 370z in town? Where did you get it done and recommendations? Also prices? All I have right now is post MAF tubes with high flow air filters and planning on adding a CBE. thanks

ghotnit · 11-07-2014, 09:15 AM

Quote:

Originally Posted by project_zed

Has anyone gotten a tune for their 370z in town? Where did you get it done and recommendations? Also prices? All I have right now is post MAF tubes with high flow air filters and planning on adding a CBE. thanks

I've done quite a bit of searching and the only place that keeps coming up is Modified by KC. They are an UPREV dealer. I am getting tuned by them when they get back from SEMA the end of the month. Another guy on the forum recommended them too.

edub370 · 11-07-2014, 09:18 AM

yep. they tuned my car. tune was done about 2 years ago and the car hasn't had any issues.

side note: are there any car shows going on this weekend

10-28-2014, 04:17 PM	#3317 (permalink)
pbhakta Enthusiast Member Join Date: Dec 2011 Location: Kansas City Posts: 333 Drives: 11 GM 370z T/S 6MT Rep Power: 14	Since no one has replied on here in a while, I will leave this lil funny story here with ya guys with my experience at work lately. Official Crappy Parkers Thread edub370, m3chhawk and Ghostvette like this. __________________ 2011 6MT 370Z Gun Metallic :: Stillen G3 CAI :: Swift Springs :: EvoR :: JWM LEDs :: TommyKaira :: Forgestar F14 :: Motordyne Shockwave))) E370 :: CS Spec-Me Lip :: AeroJacket

10-29-2014, 02:59 PM	#3319 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	everyone see that world record vhr build on the engine section? 371whp at 8200rpms! ooo that sound would be epic sboden and Ghostvette like this. __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

11-02-2014, 02:47 AM	#3320 (permalink)
Gilianz Enthusiast Member Join Date: Dec 2011 Location: Salina Posts: 379 Drives: 11 370z MB Rep Power: 14	Well... Good news is my car is on the coilovers. Bad news I didn't get to order my spacers in time. So I am still looking. Do you guys think the Z1 spacers are good enough? Don't feel like forking over another extra $100 for spacers when Z1 has 20/25 (hub centric) going for about $220 with shipping. __________________ Takeda CAI : FI Resonated TP : Stillen UD Pulley

11-03-2014, 11:57 AM	#3324 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	I used Ichiba bolt on spacers. never had an issue __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

11-07-2014, 09:18 AM	#3330 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	yep. they tuned my car. tune was done about 2 years ago and the car hasn't had any issues. side note: are there any car shows going on this weekend project_zed likes this. __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

11-04-2014, 07:50 PM	#3325 (permalink)
cregan6318 Base Member Join Date: Aug 2012 Location: Kansas City Posts: 17 Drives: 12 Nissan 370Z Rep Power: 13	Hopefully I will have the Z back tomorrow. In case you didn't hear the slave cylinder went out last Thursday night.

11-05-2014, 09:52 PM	#3327 (permalink)
cregan6318 Base Member Join Date: Aug 2012 Location: Kansas City Posts: 17 Drives: 12 Nissan 370Z Rep Power: 13	Less than 22k. No call from the dealer today. Hopefully tomorrow

11-06-2014, 11:40 PM	#3328 (permalink)
project_zed Base Member Join Date: Jun 2014 Location: Kansas City, MO Posts: 66 Drives: White 370Z Sport Rep Power: 11	Has anyone gotten a tune for their 370z in town? Where did you get it done and recommendations? Also prices? All I have right now is post MAF tubes with high flow air filters and planning on adding a CBE. thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2009 370Z Touring w/Sports - Solid Red - Kansas City, MO	microday	370Z For Sale	2	11-16-2011 04:43 AM
Hello from Oklahoma City!	JoshW	New Forum Member	9	05-08-2011 12:22 AM
Cin City, OH.....	The Collector	New Forum Member	7	11-07-2009 11:26 PM
Hello from Sin City	B_K	Introduction	4	02-26-2009 11:36 PM
Hello from Sin City!	B_K	New Forum Member	7	02-26-2009 05:12 PM