Only if we swap payments. It's only $1060 a month...for another 48 months...

Man it's been 2 years? Doesn't seem like it's been that long. Still stock?

How many miles?

Thinking about getting a GT-R?

I'm coming back to Kansas City!!!!

Still stock and 81k. I put almost 23k in one year and about 6k in the last year.

I have been away for a while thought I would drop in and say hello. Anyway tonight I saw 2 Z's on 135th and Metcalf. Turning on metcalf to 135th going no clue where. I was in the turning lane in the blue z.

Well, it depends on when you saw the Z's. We gathered for the last Fast Fridays ever at KC Trends by 135th and Metcalf. I guessing you didn't see us drive to KC Trends as we were a group consisting of 1 240Z, 1 GTR, 1 350Z, and approximately 7 370Z's.

It was at like 8:40 ish PM I think one was silver didn't pay attention to the other one

I guess it was fun while it lasted...:ugh2:

Obligatory Royals has won the world series!

Returning member question
 

Is there a Z Club for the KC area? I'd like to join so at the very least, I can see another Z once in a while. I live in the Blue Springs area and there are scarce out here.

Heart of America Z Car Club (HAZCC) is the local club, we are on Facebook @ https://www.facebook.com/groups/392729327408080/

Message Kit Lueg or go to the page and ask to join. :)

thanks
 

Sounds great to me

Shop recommendation
 

I just got to Fort Riley KS and have upgrades I want installed. Are there any reputable shops in the immediate area to KC? I do not want my Z getting hacked up. Any advice is appreciated....

I would say modified by Kc. Look them up.

Also I was thinking one of these weekends we should get a group to drive up to Topeka and drag race!

Absolutely....We have training going on the next couple weekends, but we should still link up...PM me and we can exchange info...

Hey everyone,

Just moved to KC from the other side of the state.

2009 PG Sport M6
- black valance
- rear fog
- Bassani catback

http://i832.photobucket.com/albums/z...psdm0wmtjp.jpg


With the weather warming up, hopefully I'll get to meet you all soon and learn about some good Cars & Coffee meets/driving roads in the area.

Welcome to KC. There is an active club here HAZCC (Heart of America Z Car Club). Check us out on Facebook and join the page. This weekend we are doing a tour of Boulevard Brewing and there are some cruises coming up but it is all on the FB page.

Topeka Dragway
 

2-3 April is test and tune....anyone plan on doing some runs?

I might go, depending on work schedule. I won't be making any runs, at least not until I TT the car, then maybe.... a very big maybe :p

Doubtful. I haven't done any mods since my last pulls

Hey guys, I just got finished installing some new body pieces on my car and wanted to share with you guys.

http://www.the370z.com/exterior-inte...ml#post3447387

Looks great. :tup:

I wish I had the space to do stuff like that on my car.

tire shop
 

Can anyone recommend a shop in the northland of KC for getting new tires installed? With custom wheels I am a little scared of damage being done to them. I will be using tire rack to ship the tires, but depending on the installer if they participate will use them.

KC Trends, but they aren't up north. :ugh2:

Anyone ever been on MKC's dyno? (it's a Dynojet)

Crashed a Subaru meet this Saturday and with only CBE put down 290whp!

I have not but I am thinking about getting a tune in the near future as I have most bolt-ons that I want on already.

hello dead page.

I've seen some of you recently and others saw on hazcc page but, I'm back in a VQ.

picked up a G37 IPL for daily

thats all. ::hello:

wow dead page is correct. Jackson what are the plans for the g37.

ooo.. we've been up there with a subie or 2 before.... lol

http://www.the370z.com/1580078-post253.html

http://www.the370z.com/members/edub3...-dyno-dash.jpg

Let's get this page going again. Twisties were plentiful near the places I lived in St. Louis and Columbia but, I haven't unearthed anything here yet. Favorite driving roads in the area?

There are some great roads around here. I know a lot of roads north of Platte City. Hwy H, M, O, VV and many others. If you go to Hwy 371 (one exit north of Platte City off I-29) you will get to driving nirvana. be careful. There are a lot of surprise blind corners.

the best roads in the area are northeast of liberty IMO

(H to O to EE)

http://www.the370z.com/members/edub3...2524-route.png

I saw that road on Google Maps during a slow day at work and am glad to know my suspicions are confirmed!

Labor question - has anyone gotten HFCs/Test pipes installed around here anywhere? May be picking some up soon and am curious to know what install cost would look like.

Barring an encounter with the 'demon bolt', I would guess you are looking at about an hour of labor, with a ball park guess of about $125. Hit the HAZCC FB page for the shop that offers a discount to HAZCC members. :tiphat:

I'm in Springfield MO but would gladly drive up for a meet or cruise on a weekend.. I've got an Athens blue G37S, couple breather mods, nothing earth shattering.

Edit: Crap, sorry for the giant picture
http://cimg5.ibsrv.net/gimg/www.myg3...2b3fce3019.jpg

Modified By KC just quoted me $265 with a 20% increase on labor if I bring my own parts. That costs more than the part!!

Thinking I may just save the dollars and go DIY. Any of you guys have any demon bolt experiences to sway me one way or the other?

From what I've read, some folks have problems, some don't. What I would do is soak the bolts with PB Blaster or Kroil for about an hour, then use an air impact to take off the nuts. If you have access to a lift, then using a torch is an option to heat the nut red hot, then let it cool. The third option is cutting tool and new nuts and bolts.

I think the HAZCC shop is Santa Fe in Independence. Don't quote me on that, I looked yesterday, and then promptly forgot. :ugh2: It might be worth the $35 to join, rather than pay the extra 20% for Modified by KC to install stuff. I know the shop that offers the HAZCC discount is good with us bringing our own parts. :tup:

MKC charges way too much for labor. Be careful...