Headlight modification?

eastwest2300 · 09-02-2012, 12:47 PM

Quote:

Originally Posted by dmhenderson

Also hell yes I'm still doing this. I'm nervous because I'm not mechanically inclined at all.

Also need to be careful taking of my front bumper due to the DLR kit. I'm sure it just unplugs but w/e

DM, I like your attitude.. fvck it, lets get this sh1t done. You know honestly, if people that are gonna come to my place, that are NOT doing their headlights and have bad karma, talking about you're gonna fvck this and that up, I'd rather yall stay at home. Honestly.

b1adesofcha0s · 09-02-2012, 01:12 PM

Quote:

Originally Posted by eastwest2300

DM, I like your attitude.. fvck it, lets get this sh1t done. You know honestly, if people that are gonna come to my place, that are NOT doing their headlights and have bad karma, talking about you're gonna fvck this and that up, I'd rather yall stay at home. Honestly.

Why don't you stop being a d1ck to those people who are actually trying to help you out. It's always better to be a little cautious and aware of what possible difficulties you might encounter while working on a project like this. Going in acting like Superman and thinking nothing can possibly go wrong is a terrible idea. No one has a bad attitude saying that we can't do it. We're just trying to be cautious to make sure everything runs smoothly.

MightyBobo · 09-02-2012, 02:16 PM

Quote:

Originally Posted by b1adesofcha0s

Make sure you guys have extra sealant. Every DIY I've done seems to have me running out of supplies. Its even worse when it's something you can't just run to the store and buy.

Extra supplies are nice. Yesterday wasn't your fault though, you just estimated a little short

Sent from my Galaxy S3

b1adesofcha0s · 09-02-2012, 02:25 PM

Quote:

Originally Posted by MightyBobo

Extra supplies are nice. Yesterday wasn't your fault though, you just estimated a little short

Sent from my Galaxy S3

Yeah I had a feeling it would be close, but they didn't have any more of that paint at AutoZone at the time. I'm thinking that when I sand them again to refinish, I might go over it with a bit of a darker color and then more clear on top. Maybe like one light and one medium coat of the new color and then clear.

dmhenderson · 09-02-2012, 02:51 PM

Quote:

Originally Posted by b1adesofcha0s

Make sure you guys have extra sealant. Every DIY I've done seems to have me running out of supplies. Its even worse when it's something you can't just run to the store and buy.

I have an entire tube for my 2 headlights. That should be plenty...right?

eastwest2300 · 09-02-2012, 02:51 PM

Quote:

Originally Posted by b1adesofcha0s

Why don't you stop being a d1ck to those people who are actually trying to help you out. It's always better to be a little cautious and aware of what possible difficulties you might encounter while working on a project like this. Going in acting like Superman and thinking nothing can possibly go wrong is a terrible idea. No one has a bad attitude saying that we can't do it. We're just trying to be cautious to make sure everything runs smoothly.

Its not even that, all Im hearing from a couple people is, Im not gonna do it, I dont wanna fvck it up, and yall are gonna fvck it up..its not happening bro, and Im not claiming to be superman, confident yes, superman no. There's a difference.

I've done my homework on it, and I feel like I can do it. I must have missed the people helping you out posts, because really I havent seen it. Oh wait, the people you're talking about would be Khoi, & Falcon, and their input is greatly appreciated. Sorry, if I missed a couple others.

eastwest2300 · 09-02-2012, 02:52 PM

Quote:

Originally Posted by dmhenderson

I have an entire tube for my 2 headlights. That should be plenty...right?

Yeah that should be good bro.

dmhenderson · 09-02-2012, 02:54 PM

Quote:

Originally Posted by b1adesofcha0s

Why don't you stop being a d1ck to those people who are actually trying to help you out. It's always better to be a little cautious and aware of what possible difficulties you might encounter while working on a project like this. Going in acting like Superman and thinking nothing can possibly go wrong is a terrible idea. No one has a bad attitude saying that we can't do it. We're just trying to be cautious to make sure everything runs smoothly.

Yeah I'm not gonna lie, I'm definitely nervous but I'm hellbent on getting this done. The end result is gorgeous.

eastwest2300 · 09-02-2012, 02:56 PM

Quote:

Originally Posted by dmhenderson

Yeah I'm not gonna lie, I'm definitely nervous but I'm hellbent on getting this done. The end result is gorgeous.

DM, did you already buy your paint? You're going with the semi gloss black right?

b1adesofcha0s · 09-02-2012, 02:57 PM

Quote:

Originally Posted by dmhenderson

I have an entire tube for my 2 headlights. That should be plenty...right?

I'm not too sure since I haven't done it before.

Quote:

Originally Posted by eastwest2300

Its not even that, all Im hearing from a couple people is, Im not gonna do it, I dont wanna fvck it up, and yall are gonna fvck it up..its not happening bro, and Im not claiming to be superman, confident yes, superman no. There's a difference.

I've done my homework on it, and I feel like I can do it. I must have missed the people helping you out posts, because really I havent seen it. Oh wait, the people you're talking about would be Khoi, & Falcon, and their input is greatly appreciated. Sorry, if I missed a couple others.

See there you go again! You know what, I'm tired of dealing with your BS dude. I think I will just stay at home and let you guys have fun with this. If it turns out good I mighty try it on my own. Good luck

eastwest2300 · 09-02-2012, 03:01 PM

Quote:

Originally Posted by b1adesofcha0s

See there you go again! You know what, I'm tired of dealing with your BS dude. I think I will just stay at home and let you guys have fun with this. If it turns out good I mighty try it on my own. Good luck

Awesome.

dmhenderson · 09-02-2012, 03:01 PM

Quote:

Originally Posted by eastwest2300

DM, did you already buy your paint? You're going with the semi gloss black right?

I thought someone else was in charge of paint but I can go get my own. I want semi-gloss black though. I can pick it up from Lowes right?

dmhenderson · 09-02-2012, 03:03 PM

Quote:

Originally Posted by b1adesofcha0s

I'm not too sure since I haven't done it before.

See there you go again! You know what, I'm tired of dealing with your BS dude. I think I will just stay at home and let you guys have fun with this. If it turns out good I mighty try it on my own. Good luck

Eh. I think everyone should take a deep breath and relax. This is as much about hanging out/having a few beers/eating wings as it is ******* around with headlights.
I think you should come regardless. There will be tons of food etc.

eastwest2300 · 09-02-2012, 03:03 PM

Quote:

Originally Posted by dmhenderson

I thought someone else was in charge of paint but I can go get my own. I want semi-gloss black though. I can pick it up from Lowes right?

Yeah, Im gonna have to pick up my own too, its ok, its only a few dollars anyways. I'll be going with the semi glass black. Krylon Fusion I believe it is. You can get it at Walmart, Advance Auto Parts, and maybe Autozone.

eastwest2300 · 09-02-2012, 03:04 PM

Quote:

Originally Posted by dmhenderson

Eh. I think everyone should take a deep breath and relax. This is as much about hanging out/having a few beers/eating wings as it is ******* around with headlights.
There will be tons of food etc.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any Texas headlight modification locations?	ccdominic	Texas	89	04-29-2013 10:37 AM
How fast have you driven your Z with or w/out modification?	Zoren 370	Nissan 370Z General Discussions	2	03-21-2012 11:17 PM
New to this... were should I go to post a question regarding headlight modification	Bubba	The370Z.com Feedback, Suggestions & Questions	1	03-14-2012 05:21 PM
Headlight modification	Bubba	Exterior & Interior	3	03-14-2012 09:57 AM
Lights Modification.	Kensi	Canada	6	07-20-2011 11:32 PM