VA Beach/Hampton Roads

Voice59 · 03-29-2014, 08:25 AM

FYI... SC kit finally arrived minus a couple things. Flash cable and a couple pipes which will me shipped at a later date.

VABAM · 03-29-2014, 09:28 AM

Quote:

Originally Posted by Voice59

FYI... SC kit finally arrived minus a couple things. Flash cable and a couple pipes which will me shipped at a later date.

Are you having it installed while you're gone?

takjak2 · 03-29-2014, 10:27 AM

Quote:

Originally Posted by wolfesquire

How does an oil cooler usually run?

Get the Z1 25 row kit, thermostatic plate, wrapped lines, Setrab core. $553

Install it yourself. + 6 qt oil change

Onelownismo · 03-29-2014, 09:35 PM

If you guys are interested in watching me go slowly around Road Atlanta:

Road Atlanta HPDE 1 370Z - YouTube

Road Atlanta March 15th 2014 Session 4 Part 1 - YouTube

Road Atlanta March 15th 2014 Session 4 Part 2 - YouTube

Quote:

Originally Posted by VABAM

Depending on the options, from about $400-700 without installation.

There are cheaper ones out there but they are too small IMO. I would go with at least a 19 row but would recommend a 25 row if you plan on tracking your Z. The big thing is to get an oil cooler with a thermostatic plate. With out one you'll over cool your oil during the colder months in our area. I would go with Z1 Motorsports or Stillen. Z1 has more options but Stillen has the cheapest kit and Stillen's kits all come with thermostatic plates. Also not all oil coolers are equal. For instance Stillen's 25 row Setrab cooler is 14.1" wide, Z1's is 13". and Stillen's Gold Series is 11.25". For 19 row coolers Stillen Setrab is 11.25", Z1's is 13" and Stillen Gold Series is 11.25". So keep cooler width in mind.

Cooler width might play apart in the difference between me and Mike's experiences. I'm running Stillen's Setrab Race kit which is a 14.1" wide 25 row not a 34 row like I said the other night (it was installed 3 years ago so I had forgotten the exact specs

). I think Mike is running the Z1 13" wide 25 row. You would think 1" wouldn't make a difference.....

With Stillen's Setrab Race kit (25 row) I have had no cooling issues on the track and roads like the Tail of the Dragon. The only issue I have with it is, even with the thermostatic plate, I get a little over cooling in the winter months. When temps are in the 30s or 40s my oil temp has a hard time getting over 160 under "normal" driving. That's why I like the Stillen kit because it mounts on the passenger side of the front grill. Most other kits including Z1 mount on the driver's side. With it on the passenger's side when it gets cold I put my front license plate on. My front plate is on a tow hook mount and when installed it limits the flow of air on the passenger side of the grill solving my issue.

Yeah I have the 25 row Z1 kit. Works great for me, but maybe I could stand to upgrade seeing as my temps were reaching 230ish at Road Atlanta. (Which still isn't horrible)

Quote:

Originally Posted by Voice59

FYI... SC kit finally arrived minus a couple things. Flash cable and a couple pipes which will me shipped at a later date.

Dibs on first ride along!

Quote:

Originally Posted by takjak2

Get the Z1 25 row kit, thermostatic plate, wrapped lines, Setrab core. $553

Install it yourself. + 6 qt oil change

Agreed. It was a pretty easy install as well.

Tigger · 03-30-2014, 01:51 AM

if you buy the lines and fittings i have a setrab 25 row cooler plus thermo plate in the garage needing a new home.

RoadsterST · 03-30-2014, 08:06 AM

Quote:

Originally Posted by Tigger

if you buy the lines and fittings i have a setrab 25 row cooler plus thermo plate in the garage needing a new home.

Pm price to 75098?

Sent while driving!

Voice59 · 03-30-2014, 08:12 AM

Quote:

Originally Posted by VABAM

Are you having it installed while you're gone?

Yeah, that's the plan. There's a place in Maryland I wanted to take it, but I'm not sure Robin is going to be able to do that on her own. So...I'll probably have to find another place.

VABAM · 03-31-2014, 05:26 PM

Quote:

Originally Posted by Voice59

Yeah, that's the plan. There's a place in Maryland I wanted to take it, but I'm not sure Robin is going to be able to do that on her own. So...I'll probably have to find another place.

I might have a place for you.
Your sc kit is the GTM one right?
Will your kit need (or would like) to be dynoed/tuned or is it turn key?

VABAM · 03-31-2014, 06:22 PM

Quote:

Originally Posted by Onelownismo

If you guys are interested in watching me go slowly around Road Atlanta:

Road Atlanta HPDE 1 370Z - YouTube

Road Atlanta March 15th 2014 Session 4 Part 1 - YouTube

Road Atlanta March 15th 2014 Session 4 Part 2 - YouTube

Hmmm....passed every one.
Not sure if good driver or clever editing.

Awesome vids!

Quote:

Originally Posted by Onelownismo

Yeah I have the 25 row Z1 kit. Works great for me, but maybe I could stand to upgrade seeing as my temps were reaching 230ish at Road Atlanta. (Which still isn't horrible)

230 isn't bad.
I normally run in the 220s
I would upgrade if I was consistently over 260 or going into limp mode.

Onelownismo · 03-31-2014, 06:25 PM

Quote:

Originally Posted by VABAM

Hmmm....passed every one.
Not sure if good driver or clever editing.

Awesome vids!

230 isn't bad.
I normally run in the 220s
I would upgrade if I was consistently over 260 or going into limp mode.

thanks man haha

VABAM · 03-31-2014, 07:52 PM

Quote:

Originally Posted by Onelownismo

thanks man haha

While watching your first video this was what going through my head....

Onelownismo · 03-31-2014, 08:19 PM

Man that's how I felt!!!!! I'm moving into hpde 2 next time so hopefully the people are more my skill level and there wont' be as much traffic.

Voice59 · 04-01-2014, 11:08 AM

Quote:

Originally Posted by VABAM

I might have a place for you.
Your sc kit is the GTM one right?
Will your kit need (or would like) to be dynoed/tuned or is it turn key?

It's the turn key but I still want it to be tuned. I have other things being installed as well. HFC's, headers, clutch/flywheel, coilovers, gauges, etc. Who or where is the place that you're talking about? Is it the guy in your car club?

Voice59 · 04-01-2014, 11:10 AM

Hit me up on my email simmondsko@cvn77.navy.mil.

VABAM · 04-01-2014, 12:51 PM

Quote:

Originally Posted by Voice59

Hit me up on my email simmondsko@cvn77.navy.mil.

I'll email you later.

03-31-2014, 08:19 PM	#777 (permalink)
Onelownismo Track Member Join Date: Jul 2011 Location: Suffolk, VA Age: 37 Posts: 805 Drives: 09 PG base/sport Rep Power: 15	Man that's how I felt!!!!! I'm moving into hpde 2 next time so hopefully the people are more my skill level and there wont' be as much traffic. __________________ 2009 Base w/ Sport - Fast Intentions - Stillen - Whiteline - BC - SSR - Enkei - Z1 - UpRev Tuned

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hampton Roads Z/G meet, cruise, and lunch	triggaZ	Mid-Atlantic Region	9	07-16-2011 08:05 PM
Caravan from Hampton Roads and Richmond to Zday????	PapoZalsa	Mid-Atlantic Region	2	05-18-2010 12:00 PM
Z/G Cruise May 16 in Hampton Roads	PapoZalsa	Mid-Atlantic Region	3	05-16-2010 11:02 PM
Detailing specials in Hampton Roads area	StealthZ	Mid-Atlantic Region	6	02-13-2010 03:21 PM
2010 Hampton Roads International AutoShow	PapoZalsa	Mid-Atlantic Region	0	01-05-2010 10:50 PM

03-29-2014, 08:25 AM	#766 (permalink)
Voice59 Premium Member Join Date: Sep 2011 Location: Va Beach, Virginia Posts: 1,418 Drives: 2009 Nissan 370z Rep Power: 16	FYI... SC kit finally arrived minus a couple things. Flash cable and a couple pipes which will me shipped at a later date.

03-30-2014, 01:51 AM	#770 (permalink)
Tigger A True Z Fanatic Join Date: Mar 2013 Location: NM Posts: 8,063 Drives: Awedeeeeee Rep Power: 602	if you buy the lines and fittings i have a setrab 25 row cooler plus thermo plate in the garage needing a new home.

04-01-2014, 11:10 AM	#779 (permalink)
Voice59 Premium Member Join Date: Sep 2011 Location: Va Beach, Virginia Posts: 1,418 Drives: 2009 Nissan 370z Rep Power: 16	Hit me up on my email simmondsko@cvn77.navy.mil.