Newby looking for power mods for '10 370Z

Nesbit

I am new to 370s (all Nissans for that matter) but not new to tuning / mod.ing engines on my own.

I am looking optimally for not-terribly-invasive engine mod.s. I.e. air intakes & software. Would like to keep all relatively reversable for warranty reasons.

What's best / hot out there for '10 370?

I know this is an oversimplified and basic question so thanks for help. If someone asked me this about a Porsche or Mercedes I'd be thinking "boy what a newbie, where should I begin?".... so again thanks and if need any clarifying questions asked or narrowing down please let me know.

eastwest2300

I'd go to a car meet up, we have them often, in Fairfax and in Columbia MD, you could see what a lot of the guys around here have done. Its a pretty cool experience.

__________________
Infiniti QX70 & Toyota Supra 3.0 Premium

Kirkster

Stillen Intakes.
High Flow Cats.
Cat Back exhaust.
UpRev retune...

Or save up a bit and put in a supercharger. But then again I did not care about the power train portion of my warranty...

__________________
Powertrain Warranty voided on 5/14/2011
Mod List:GTM Supercharger,SmartTop module, Oil Cooler, GT-R Start button, Nismo Exhaust, BC Racing ER Coilovers, Backup Camara
For eastwest:

b1adesofcha0s

This.

__________________
Project: b1adeZmobile (2009 370Z) | Uprev Tune by AAM Competition | Berk Exhaust
Project: b1adeZmobile 2.0 (2014 C7 Z51) | Corsa Xtreme Exhaust

Nesbit

Thanks much. Will investigate those. I'm looking to do something soon.... like now.

I have a freind who has a 300zx turbo that he bought with some Stillen upgrades on it, actually I think the Stillen shop itself did turbo upgrades on it. It is pretty fast car.... not really controllable.... but fast if you can keep it going straight! LOL

Any particular exhaust / cats that you recommend? I'm guessing cats will likely be more than I'm looking to spend on this car rt. now.

I presume this UpRev (which I haven't looked at - at all yet) will take into acct. any intake and exhaust mod.s?

Not really trying to throw a blower on it at this point but I'm sure that adds for some excitement. When ur doing things like supercharges on these cars how robust are the heads/headgaskets and transmissions?

Thanks again.

TerribleONE

Check out fast intentions!!! They have an outstanding reputation and Tony's customer service is top knotch..

__________________

Kirkster

Exhaust is highly preferential. I found the F.I. exhausts to have drone and that is a deal killer for me. I am a fan of the Ark exhaust (even though I am running a take off Nismo) no drone and deep. EastWest has one I think if you want to hear it locally.

UpRev is the company that makes the tuning software. You get a copy when you go get a dyno tune from the local tuners around here.

Supercharger, Motor and drive train seem to mix very well, Many users on the forum with the GTM and nothing blown so far as I have heard. Clutch is good to about 500whp. Transmissions seem to be holding up well unless it is an auto and then there are fixes for the auto out there.

__________________
Powertrain Warranty voided on 5/14/2011
Mod List:GTM Supercharger,SmartTop module, Oil Cooler, GT-R Start button, Nismo Exhaust, BC Racing ER Coilovers, Backup Camara
For eastwest:

eastwest2300

That I do... and I loove it! Ark Exhausts RULE!! Its badass! Thanks Kirk for installing it for me..

__________________
Infiniti QX70 & Toyota Supra 3.0 Premium

XwChriswX

PM Jeffblue

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

eastwest2300

I'd take the advice of the Z God (Kirkster)

__________________
Infiniti QX70 & Toyota Supra 3.0 Premium

FL 4Motion

Intakes: Stillen CAI or k&n drop in filters and post maf tubes

Exhaust: Fast Intentions

Headers: Fast Intentions or PPE (only long tube headers are worth it, stay away from shorties, the stock tubular exhaust manifolds are actually pretty good)

Tune: Uprev (only choice really since COBB dropped the Z platform like a bad habit, but Uprev is really good)

I'm personally not comfortable with underdrive/lightweight pullies but some folks run them here, good for freeing up 2-5whp.

Lightweight flywheel will also do /\

x1000 about going to a local meet and seeing folks cars in person and what they've done, will give you a much better idea of where you want to go.

Cristobal09

the stillen cai is overpriced for what you get IMO, unless you get up to 6800 rpm's constantly and want good sound. Personally, I would just get the K&N drop in filters with mishimoto post maf hoses and save 300 bucks. I have the mishimoto post maf tubes with K&N's and noticed a DECENT amount of midrange, but thats most likely butt dyno. look for jomer on the forums for best price. Look for FBnissan on the forums here to get his contact info.

__________________
2022 Camaro ZL1
2021 Explorer ST

FL 4Motion

see my sig, I am of the same mind as you. BUT, some folks really love putting aftermarket CAI on their cars.

Cristobal09

I agree, I just cannot understand why.....UNLESS they are doing it for the sound and if they rev up that high all the time.

But use the 300 bucks you saved by getting the hoses and K&N filters and apply it towards stillen sways or swift springs.

__________________
2022 Camaro ZL1
2021 Explorer ST

FL 4Motion

To be fair(ish), the stillen CAI will yield a few more whp peak, so if someone is looking to have the absoulute highest dyno #'s they possibly can, while not really worrying about little to no midrange gains, then the Stillen CAI is what the doctor ordered.