Newby looking for power mods for '10 370Z

b1adesofcha0s · 01-11-2012, 08:55 AM

Also the rear camber arms are not always necessary. I didn't need them when I dropped my Z on the swifts. My rear camber is at -2.3/-2.4.

Cristobal09 · 01-11-2012, 09:05 AM

Quote:

Originally Posted by b1adesofcha0s

Also the rear camber arms are not always necessary. I didn't need them when I dropped my Z on the swifts. My rear camber is at -2.3/-2.4.

I was at -2.6 for the rears, after the ichibas I had them adjust it back to -1.8. I think the stock specs are between -2.1 and -1.2 or something? I would figure at what you are at, youll burn through tires much quicker. But what do I know, ive only had my car for 1300 miles.

b1adesofcha0s · 01-11-2012, 09:07 AM

Quote:

Originally Posted by Cristobal09

I was at -2.6 for the rears, after the ichibas I had them adjust it back to -1.8. I think the stock specs are between -2.1 and -1.2 or something? I would figure at what you are at, youll burn through tires much quicker. But what do I know, ive only had my car for 1300 miles.

Mine is only a little bit off, nothing too bad.

Kirkster · 01-11-2012, 09:09 AM

The specs for the rear are -2.2 being the max and I am at -2.2 on the drivers side and -2.3 on the passengers side.

I have not noticed any tread life problems and have had a set of RE11s on there for the last 11K miles. Surprisingly have lots of tread life left which was a shocker as I have heard that these tires don't last long...

b1adesofcha0s · 01-11-2012, 09:13 AM

Quote:

Originally Posted by Kirkster

The specs for the rear are -2.2 being the max and I am at -2.2 on the drivers side and -2.3 on the passengers side.

I have not noticed any tread life problems and have had a set of RE11s on there for the last 11K miles. Surprisingly have lots of tread life left which was a shocker as I have heard that these tires don't last long...

Especially with everything they've been through after the SC install

eastwest2300 · 01-21-2012, 07:46 PM

No problem brother, we run these streets around here, we're here to help.

01-11-2012, 08:55 AM	#1 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 142	Also the rear camber arms are not always necessary. I didn't need them when I dropped my Z on the swifts. My rear camber is at -2.3/-2.4. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

01-11-2012, 09:09 AM	#4 (permalink)
Kirkster A True Z Fanatic Join Date: Dec 2008 Location: Peoples Republic of MD Posts: 1,792 Drives: Roadster of DOOM Rep Power: 20	The specs for the rear are -2.2 being the max and I am at -2.2 on the drivers side and -2.3 on the passengers side. I have not noticed any tread life problems and have had a set of RE11s on there for the last 11K miles. Surprisingly have lots of tread life left which was a shocker as I have heard that these tires don't last long... __________________ Powertrain Warranty voided on 5/14/2011 Mod List:GTM Supercharger,SmartTop module, Oil Cooler, GT-R Start button, Nismo Exhaust, BC Racing ER Coilovers, Backup Camara For eastwest:

01-21-2012, 07:46 PM	#6 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,019 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684551	No problem brother, we run these streets around here, we're here to help. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Newby question	Old Crow	Exterior & Interior	3	01-30-2011 11:07 PM
Hello Newby Here	Old Crow	New Forum Member	7	01-26-2011 03:13 PM
Another Newby	Bama Z	Introduction	3	10-07-2009 09:33 AM
G'DAY from the newby down-under	Aussie-Z	New Forum Member	2	06-25-2009 05:46 PM
And yet another Newby from (WA)	Nikon FM	New Forum Member	6	01-11-2009 02:48 PM